How Can Exhaust Valve and Intake Valves Be Reworked to Ensure Proper Valve and Seat Refacing on Chrysler Aspen?

Burned or worn valve seats may be reworked accurately, but if the angle or seat width changes, the cylinder head needs replacement. Make sure to select the suitable valve guide pilot to get a perfect surface when reseating stones after refacing. First, use a dial indicator at the center of the valve seat to show that the total run out does not go above 0.051 mm (0.002 in). Brush on some Prussian blue, fit the valve into the cylinder head while using light pressure and turn the valve slowly. Once the valve is removed, look at the valve face; if blue marking is below the top edge, set the valve seat with a 15 degree stone and if it's below the bottom edge, raise the seat using a 65 degree stone. A properly mounted engine must have an intake seat size of 1.75 - 2.36 mm (0.0689 - 0.0928 in.) and an exhaust seat size of 1.71 - 2.32 mm (0.0673 - 0.0911 in.). After finishing the refacing process, determine the height of your valve spring. Both the intake and exhaust valve springs should not measure more than 40.74 mm (1.6039 in.). The face angle at the valve seat and valve face is expected to measure in the range of 44.5 - 45 degrees.

OEM Chrysler Aspen Exhaust Valve

Exhaust Muffler Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Valves found

View related parts
Chrysler Aspen Exhaust Valve Part Number: 53022088AD
$35.55 MSRP: $53.20
You Save: $17.65 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust; Valve Exhaust Standard
- Replaces: 53022088AC, 53022088AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited, Limited Hybrid | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Exhaust Valve Part Number: 53021551AB
$34.98 MSRP: $49.45
You Save: $14.47 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust; Valve Exhaust Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Aspen | Limited | 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Exhaust Valve Part Number: 53020748
Product Specifications
- Other Name: Valve - Exhaust; Intake Valve; Valves; Valve Exhaust Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Exhaust Valve Part Number: 53021644AC
Product Specifications
- Other Name: Valve - Exhaust; Intake Valve; Valves; Valve Exhaust Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

Chrysler Aspen Exhaust Valve

Choose OEM Exhaust Valve that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Exhaust Valve follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Exhaust Valve is an important part that plays a major role in improving the performance and durability of Chrysler Aspen vehicles. In sleek cooperation with the engine's cylinder, the Exhaust Valve is employed to facilitate the quick discharge of burnt gases from the engine for proper functioning. As gas dispose mechanism the Exhaust Valve helps the Chrysler Aspen to operate smoothly by avoiding problems like low power, wrong firing and others. This reliability is especially vital for the Chrysler Aspen which stands out for its capacity for towing and the ample interior space. This Exhaust Valve supports different Chrysler Aspen models enhancing their performance and safety; the valve acts as one of the constituents of internal combustion engines. Interestingly, the Chrysler Aspen has got strong Bases such as; 4.7L V8 and 5.7L Hemi V8 engines that are BN let by the work of the Exhaust Valve. Some of the special characteristics of the Exhaust Valve are durability due to the materials used and small size that is suitable for high tem coup and high pressure. Such devotion to the minute particular assures the Exhaust Valve a unique position in the market of automobiles, thus underscoring the car's dependability and speed. In conclusion, the Exhaust Valve is vital for those who want a worthy and efficient SUV vehicle.

Chrysler Aspen Exhaust Valve Parts and Q&A

Exhaust Valve
53022088AD
Q: How Can Exhaust Valve and Intake Valves Be Reworked to Ensure Proper Valve and Seat Refacing on Chrysler Aspen?
A:
Burned or worn valve seats may be reworked accurately, but if the angle or seat width changes, the cylinder head needs replacement. Make sure to select the suitable valve guide pilot to get a perfect surface when reseating stones after refacing. First, use a dial indicator at the center of the valve seat to show that the total run out does not go above 0.051 mm (0.002 in). Brush on some Prussian blue, fit the valve into the cylinder head while using light pressure and turn the valve slowly. Once the valve is removed, look at the valve face; if blue marking is below the top edge, set the valve seat with a 15 degree stone and if it's below the bottom edge, raise the seat using a 65 degree stone. A properly mounted engine must have an intake seat size of 1.75 - 2.36 mm (0.0689 - 0.0928 in.) and an exhaust seat size of 1.71 - 2.32 mm (0.0673 - 0.0911 in.). After finishing the refacing process, determine the height of your valve spring. Both the intake and exhaust valve springs should not measure more than 40.74 mm (1.6039 in.). The face angle at the valve seat and valve face is expected to measure in the range of 44.5 - 45 degrees.