How to Service and Repair a Throttle Body on a 4.7L V-8 on Chrysler Aspen?

First, remove the air duct and the air resonator box located at the throttle body to start servicing or repairing the throttle body on a 4.7L V-8. The next step is to unplug the electric connectors that lead to the IAC motor and TPS from the throttle body which has part numbers 3, 4 and 5. After that, unhook the vacuum line from the throttle body and disconnect all the control cables from the throttle lever arm. The last step is to remove the throttle body from the intake manifold by taking out the three bolts attached to the throttle body.

How to install a Throttle Body on a 4.7L V-8 engine on Chrysler Aspen?

Before putting the throttle body on the 4.7L V-8, confirm the O-ring between the throttle body and the intake manifold and change it as needed. After cleaning both surfaces, put the new gasket on the throttle body and intake manifold. Put finger pressure on all throttle body bolts and remove them before starting the engine to prevent accidental overtightening, as this can harm the throttle body, throttle plate, gaskets, bolts or intake manifold. Crank the torque wrench while criss-crossing the mounting bolts to reach a nutforce of 7.5 Nm (65 in. lbs.). Then, put in the electrical connector, the right vacuum lines and the air cleaner duct and plenum at the throttle body after that. Then, link up the negative battery cable, use the diagnostic tool to erase all saved codes and complete the ETC Relearn function.

OEM Chrysler Aspen Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Throttle Bodies found

View related parts
Chrysler Aspen Throttle Body Part Number: 53032837AB
$316.11 MSRP: $465.00
You Save: $148.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly; Electronic Throttle Body Module
- Replaces: 53032837AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chrysler Aspen | Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Throttle Body Part Number: 4591847AC
$308.30 MSRP: $471.00
You Save: $162.70 (35%)
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly
- Replaces: 68060354AA, 4591847AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chrysler Aspen Throttle Body Part Number: 53032801AC
$425.94 MSRP: $626.00
You Save: $200.06 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Module.
- Replaces: 53032801AA, 53032801AB, 68060353AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Throttle Body Part Number: 5114397AA
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

Chrysler Aspen Throttle Body

Choose OEM Throttle Body that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Throttle Body follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Aspen Throttle Body is a part of the fuel injection system of a car and is a very crucial part in as far as controlling the flow rate of air into the engine is concerned. This fine gadget is sandwiched in between the air cleaner and intake manifold and equipped with a butterfly valve which opens in accordance with accelerator pedal command for the optimal possible air admission. During the migration from mechanical throttle control to the Electronic Throttle Control (ETC), the Chrysler Aspen Throttle Body became more reliable and in harmony with safety features. This has been made even more sophisticated in modern Aspen models that come with multi-port fuel injection systems improving both power and economy. The Chrysler Aspen Throttle Body has been designed to work with the range of aspen models that were manufactured between 2006 and 2008 with an aim of providing drivers with better control of their vehicle. In turn, the Throttle Body designed contributes to the ideal air-fuel ratios to be maintained, which are needed for the engine's efficiency in addition to safety. The Chrysler Aspen Throttle Body has other unique qualities that make it suitable to handle high-performance engines such as 5.7L Hemi V8 among other factor that differentiate it from other auto parts in the market. The reliability and overall performance of Throttle Body does not seem to be affected even for high-mileage vehicles though car owners may opt to clean or replace this part. Finally, Chrysler Aspen Throttle Body can be regarded as a perfect example of how Chrysler develops and implements only high-quality and reliable products that add to the driving enjoyment for all the Chrysler Aspen owners.

Chrysler Aspen Throttle Body Parts and Q&A

Throttle Body
5114397AA
Q: How to Service and Repair a Throttle Body on a 4.7L V-8 on Chrysler Aspen?
A:
First, remove the Air Duct and the air resonator box located at the throttle body to start servicing or repairing the throttle body on a 4.7L V-8. The next step is to unplug the electric connectors that lead to the IAC motor and TPS from the throttle body which has part numbers 3, 4 and 5. After that, unhook the vacuum line from the throttle body and disconnect all the control cables from the throttle lever arm. The last step is to remove the throttle body from the Intake Manifold by taking out the three bolts attached to the throttle body.
Throttle Body
53032801AC
Q: How to install a Throttle Body on a 4.7L V-8 engine on Chrysler Aspen?
A:
Before putting the throttle body on the 4.7L V-8, confirm the O-ring between the throttle body and the Intake Manifold and change it as needed. After cleaning both surfaces, put the new gasket on the throttle body and intake manifold. Put finger pressure on all throttle body bolts and remove them before starting the engine to prevent accidental overtightening, as this can harm the throttle body, throttle plate, gaskets, bolts or intake manifold. Crank the torque wrench while criss-crossing the mounting bolts to reach a nutforce of 7.5 Nm (65 in. lbs.). Then, put in the electrical connector, the right vacuum lines and the air cleaner duct and plenum at the throttle body after that. Then, link up the negative battery cable, use the diagnostic tool to erase all saved codes and complete the ETC Relearn function.