JeepParts
My Garage
My Account
Cart
OEM Chrysler Cirrus Clutch Cable
Clutch Cable Wire- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Clutch Cable found
Chrysler Cirrus Release Cable Part Number: 4593333
Chrysler Cirrus Clutch Cable
Choose OEM Clutch Cable that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Clutch Cable follows strict manufacturing steps to lock in quality and fit. If your Chrysler Cirrus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Cirrus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
Clutch cable is commonly found in Chrysler Cirrus vehicles where it has responsibility of ensuring the easy engagement of the engine with the vehicles' transmission system. The Clutch Cable as it controls the slippage between these components enables the driver to shift gear, stop and maneuver the vehicle at slow speed. The Clutch Cable however may undergo some level of pulling out along the life cycle of the vehicle and should therefore be replaced in order to ensure optimum functionality of the clutch system. Chrysler Cirrus Clutch Cable should be properly maintained to enhance the flow of power between the clutch and the transmission so as to enhance the delivery of power on the vehicle. Therefore Chrysler Cirrus Clutch Cable requires constant maintenance to ensure that the vehicle stays for a long time with good performance.
Chrysler Cirrus Clutch Cable Parts and Q&A
- Q: How to Maintain and Fix a Clutch Cable on Chrysler Cirrus?A:The first step is to take out the Power Distribution Center and then to lift the clutch cable cover. With the clutch cable still attached to the clutch, pull it back toward yourself to release it and then guide it back through the slot in the transaxle until it's freed from the release lever. After that, detach the clutch cable up-stop/spacer from the clutch cable connected to the pedal by pressing the pedal. Insert a flat-blade pry tool into the retaining tab at the top of the clutch pedal, but first detach it from the pin by separating the two using the pry tool while you take off the pedal spacer. Make sure you don't pull up the clutch cable too strong because you could break the cable self-adjuster. Gently twist the cable from the dash panel and clutch bracket and remove it. While installing, place the end of the clutch cable with the self-adjuster through the whole in the dash panel into the bracket, with the round cable grommet sitting securely on the panel and the self-adjuster making full contact with the bracket. Put the clutch cable on the up-stop/spacer after and next link it to the clutch pedal. The Adjuster Mechanism should turn correctly if you draw the clutch release lever to make the cable tight and push the housing toward the dashboard with up to 25 lbs. of force. If everything works properly, run the cable through the transaxle's opening and attach it to the lever with the washer in place on the lever tips. Then, slide the clutch cable housing back to remove it. Insert the cable housing into the transaxle, reinstall the cover over the cable and check the switch on the clutch pedal position.
