How to Service and Repair Exhaust Valve and Intake Valves on Chrysler Cirrus?

When servicing or repairing a valve, first use a universal valve spring compressor to compress the valve springs after you have removed the cylinder head. Detach the locks, retainers, seals and springs held by each valve. Before you detach the valves, clean the valve stem lock holes of sharp burrs and pick the correct valves so you put them back where they belong. Clean and inspect the valves the way it is documented in the procedure. For installation, apply engine oil onto the valve stems before pushing them into the cylinder head. Replace the nut seals on each valve with a valve stem tool, pressing them hard and correctly on the valve guide. Using oversize valves means you also need oversize valve seals to stop guide wear from becoming excessive. Insert the valve springs and retainers, making sure they are just barely compressed when installing the locks so that the direction of compression won't damage the valve stems. After you remove the valve spring compressor, look to ensure that all locks are set as they should be. Once finishing the valve and seat refacing, check that the valve spring sits correctly by measuring the distance from the spring seat to the base of the retainer. Deburr the valve spring if it's higher than 38.75 mm (1.525 inch) and attach a 0.762 mm (0.030 inch) spacer under the spring seat to fix the height.

OEM Chrysler Cirrus Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Intake Valves found

View related parts
Chrysler Cirrus Intake Valve Part Number: 4648615
$9.51 MSRP: $12.05
You Save: $2.54 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Intake; Valve, Intake - Standard-6Mm X 112.4Mm; Valve Intake Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Cirrus | LX | 4 Cyl 2.0 L GAS
View related parts
Chrysler Cirrus Intake Valve Part Number: 4884691AA
$26.23 MSRP: $33.60
You Save: $7.37 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Intake; Valves; Valve Intake Standard
- Replaces: 4667969AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Cirrus | LX | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Cirrus Intake Valve Part Number: 4667969
Product Specifications
- Other Name: Valve; Valves; Valve, Intake - Standard; Valve Intake Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999, 1995-1997 Chrysler Cirrus | LX, LXi | 4 Cyl 2.4 L GAS
View related parts
Chrysler Cirrus Intake Valve Part Number: MD301193
Product Specifications
- Other Name: Valve - Intake; Valve Seals; Valves; Valve Intake Standard; Valve
- Replaces: MD159502
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | LX, LXi | 6 Cyl 2.5 L GAS

Chrysler Cirrus Intake Valve

Choose OEM Intake Valve that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Intake Valve follows strict manufacturing steps to lock in quality and fit. If your Chrysler Cirrus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Cirrus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Intake Valve found in Chrysler Cirrus Automobiles is highly essential in improving the performance of the engine and efficiency of combustion of the fuel and air mixture. In order for these valves to operate right, they must open and close at a particular time and any delay leads to bad combustion and reduced power output. A valve spring remover and compressor are used by Chrysler Cirrus vehicles to replace Intake Valves that have been damaged by the use of the car. It is a delicate process by which any harm to the valve guide or seal is prevented, in addition, the new Intake Valve must be cleaned, and its installation must be done properly. While there may be variations in the design of Intake Valves across different Chrysler Cirrus models, the fundamental function remains consistent: for the purpose of sustaining energy of an engine and avoiding over expenses resulting from optional valve breakdown.

Chrysler Cirrus Intake Valve Parts and Q&A

Intake Valve
4884691AA
Q: How to Service and Repair Exhaust Valve and Intake Valves on Chrysler Cirrus?
A:
When servicing or repairing a valve, first use a universal valve spring compressor to compress the valve springs after you have removed the cylinder head. Detach the locks, retainers, seals and springs held by each valve. Before you detach the valves, clean the valve stem lock holes of sharp burrs and pick the correct valves so you put them back where they belong. Clean and inspect the valves the way it is documented in the procedure. For installation, apply engine oil onto the valve stems before pushing them into the cylinder head. Replace the nut seals on each valve with a valve stem tool, pressing them hard and correctly on the valve guide. Using oversize valves means you also need oversize valve seals to stop guide wear from becoming excessive. Insert the valve springs and retainers, making sure they are just barely compressed when installing the locks so that the direction of compression won't damage the valve stems. After you remove the valve spring compressor, look to ensure that all locks are set as they should be. Once finishing the valve and seat refacing, check that the valve spring sits correctly by measuring the distance from the spring seat to the base of the retainer. Deburr the valve spring if it's higher than 38.75 mm (1.525 inch) and attach a 0.762 mm (0.030 inch) spacer under the spring seat to fix the height.