How to Service and Repair a Camshaft Seal on Chrysler Cirrus?

To work on the camshaft oil seal, first remove the timing belt cover and timing belt from the front of the engine. Each camshaft sprocket should be held in place with Special Tool 6847 as you unfasten its center bolt. Then, pull off the rear timing belt cover and extract the camshaft seal using Special Tool C-4679-A, not damaging the seal bore or surface. Removing any varnish from the shaft seal surface is necessary before installation and if needed, polish away dirt or nicks with 400 grit sandpaper. Secure the camshaft seal into the head with the Special Tool MD-998306 so that it sits flush with the top of the head. Next, slide the rear timing belt cover back on and add the camshaft sprocket, brought to its appropriate torque of 101 Nm (75 ft. lbs.) once you hold the sprocket in place using Special Tool 6847. In the end, replace the timing belt and front covers.

OEM Chrysler Cirrus Camshaft Seal

Cam Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Seals found

View related parts
Chrysler Cirrus Oil Seal Part Number: MD372536
$7.81 MSRP: $12.70
You Save: $4.89 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft; Multi-Purpose Seal; Camshaft Seal; Front Seal; Seal; Seal Camshaft
- Replaces: 1052A366, MD153103
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | LX, LXi | 2.5L V6, 6 Cyl 2.5 L GAS
View related parts
Chrysler Cirrus Oil Seal Part Number: 4777086
$10.73 MSRP: $15.95
You Save: $5.22 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Camshaft; Engine Camshaft Seal; Camshaft Seal; Front Seal; Camshaft Front Oil, Order 5016733Aa Per Tsb 09-008-00.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000, 1995-1997 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Chrysler Cirrus Camshaft Seal

Choose OEM Camshaft Seal that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Camshaft Seal follows strict manufacturing steps to lock in quality and fit. If your Chrysler Cirrus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Cirrus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

In Chrysler Cirrus vehicles, the Camshaft Seal plays an important function in the safety of the engine, as it shields it against dirt particles and oil and all elements that could make their way into the part of the camshaft that is positioned outside the cylinder head. This seal is critical to ensure adequate lubrisation of the camshaft as the later is crucial to the efficiency of the engine. Camshaft Seals fitted in Chrysler Cirrus models are chosen to filter out unwanted materials in order to perform to the optimum. While the overview does not specify different types or styles of Camshaft Seals used across various Cirrus vehicles, the primary function remains consistent: preserving the state and increasing the durability of the engine. The Camshaft Seal plays an important part in the reliability of the Chrysler Cirrus, a fact reflected in the assessment of where and how that component functions.

Chrysler Cirrus Camshaft Seal Parts and Q&A

Oil Seal
4777086
Q: How to Service and Repair a Camshaft Seal on Chrysler Cirrus?
A:
To work on the camshaft oil seal, first remove the Timing Belt cover and timing belt from the front of the engine. Each camshaft sprocket should be held in place with Special Tool 6847 as you unfasten its center bolt. Then, pull off the rear timing belt cover and extract the camshaft seal using Special Tool C-4679-A, not damaging the seal bore or surface. Removing any varnish from the shaft seal surface is necessary before installation and if needed, polish away dirt or nicks with 400 grit sandpaper. Secure the camshaft seal into the head with the Special Tool MD-998306 so that it sits flush with the top of the head. Next, slide the rear timing belt cover back on and add the camshaft sprocket, brought to its appropriate torque of 101 Nm (75 ft. lbs.) once you hold the sprocket in place using Special Tool 6847. In the end, replace the timing belt and front covers.