Where is the Crankshaft Position Sensor located, and How to remove and install it on Chrysler Concorde?

The crankshaft position sensor is located on the passenger side of the transmission housing, just above the differential housing. The sensor's base is positioned above the drive plate. The sensor can be removed by first disconnecting the electrical connector, and then removing the sensor mounting screw and sensor. To install the sensor, place it in position and push down until the sensor contacts the transmission case. With the position held in place, install the retaining bolt and tighten to 12 N.m (105 in. lbs) and finally, reconnect the crankshaft position sensor electrical connector.

OEM Chrysler Concorde Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Position Sensors found

View related parts
Chrysler Concorde Crankshaft Position Sensor Part Number: 4727451AA
$56.61 MSRP: $81.35
You Save: $24.74 (31%)
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Cam/Crankshaft Sensor; Crankshaft Sensor; Sensor Crankshaft Position; Sensor Crankshaft
- Replaces: 4609153AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chrysler Concorde | Limited, LX, LXi | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Crankshaft Position Sensor Part Number: 4609153AF
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor; Sensor Crankshaft Used Assembly Camshaft Sensor (Cs Model Only); Sensor Crankshaft
- Replaces: 4609153AB, 4609153AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Chrysler Concorde | LX, LXi | 2.7L V6, 3.2L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS
View related parts
Chrysler Concorde Crankshaft Position Sensor Part Number: 4609009
Product Specifications
- Other Name: Sensor - Crankshaft; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor, Crank Timing (Crankshaft Position Sensor); Ambient Temperature, Overhead Console.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-2001 Chrysler Concorde | Base, LX, LXi | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Crankshaft Sensor Part Number: 4556224
Product Specifications
- Other Name: Crankshaft; Crankshaft Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1996 Chrysler Concorde | Base, LX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Chrysler Concorde Crankshaft Position Sensor

Choose OEM Crankshaft Position Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Crankshaft Position Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Concorde matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Concorde parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Concorde Crankshaft Position Sensor Parts and Q&A

Crankshaft Position Sensor
4609009
Q:
Where is the Crankshaft Position Sensor located, and How to remove and install it on Chrysler Concorde?
A:
The crankshaft position sensor is located on the passenger side of the transmission housing, just above the differential housing. The sensor's base is positioned above the drive plate. The sensor can be removed by first disconnecting the electrical connector, and then removing the sensor mounting screw and sensor. To install the sensor, place it in position and push down until the sensor contacts the transmission case. With the position held in place, install the retaining bolt and tighten to 12 N.m (105 in. lbs) and finally, reconnect the crankshaft position sensor electrical connector.