Before changing the headlamp switch, open the hood and remove the negative
Battery Cable from the remote battery post. After that, take out the left end cover, left instrument panel trim cover and cluster bezel using the proper steps described in the manual. Afterwards, open the three screws holding the headlamp switch to the cluster bezel and pull the switch from the bezel. At this step, twist the lamp sockets out because they can still be used. Before installing the switch, make sure it is pushed all the way against the pad. Slot the headlamp switch back into the bezel and pin it down with the three screws. Fit the left end cover, left instrument panel trim cover and the cluster bezel. The last step is to connect the negative battery cable to the remote battery post.