How to Replace an Ignition Lock Cylinder on Chrysler Concorde?

The ignition switch lock cylinder is set into the housing farthest from the ignition and lets the key rotate to five different positions. Accessory, off (locked), Unlock, On/Run and Start. If there is a column shift on the car, you'll need to replace the interlock cassette when you install the cylinder, but for a floor shift, the interlock cable should be altered at the driver's floor shifter. Check the first thing with a lock is if it is factory-locked; if it is, then disconnect the negative cable from the battery and then the upper and lower covers from the steering column and take off the lever alongside the screw that holds it in place. Put the ignition key into the run spot and push down the retaining tab, then push the tab and pull the lock cylinder out. Push the key into the lock and turn it to start the mechanism to relieve pressure on the retaining tab. Guide the shaft at the edge of the lock cylinder directly into the socket in the housing, seeing that the socket is set to Run. Place the lock cylinder inside the housing, with its grooves lined up and push it so the tab shows from the other end. Turn the Off button and take the key out. If a column shift vehicle has received a new lock cylinder, place and adjust a new interlock cassette; for a floor shift vehicle, reposition or place the adaptor on the interlock cable. After that, put back on the upper and lower covers on the steering column, put the tilt lever in place and fix the negative cable to the battery.

OEM Chrysler Concorde Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Lock Cylinders found

View related parts
Chrysler Concorde Ignition Lock Cylinder Part Number: 5083915AB
$143.89 MSRP: $214.00
You Save: $70.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Lock - Ignition Lock; Lock Cylinder; Ignition Cylinder; Cylinder & Keys; Cylinder Ignition Lock
- Replaces: 5003843AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 2.7L V6, 3.2L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Ignition Lock Cylinder Part Number: 4746666
$27.09 MSRP: $34.87
You Save: $7.78 (23%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Lock - Ignition Lock; Lock Cylinder; Cylinder & Keys; Cylinder Ignition Lock; Cylinder Lock Package; Cylinder, Ignition
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

Chrysler Concorde Ignition Lock Cylinder

Choose OEM Ignition Lock Cylinder that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Ignition Lock Cylinder follows strict manufacturing steps to lock in quality and fit. If your Chrysler Concorde matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Concorde parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Concorde Ignition Lock Cylinder is one of these parts that matters a lot in Chrysler cars and their high performance. This Ignition Lock Cylinder is tailor made for the Chrysler Concorde models manufactured between 1993 and 2004; it is an essential component that guarantees the proper engagement of the key for starting the engine. In addition, its solid structure makes it difficult for anyone to access the inside of a vehicle, mainly the ignition without the right key. The Chrysler Concorde Ignition Lock Cylinder can be used in different trims of the Concorde car such as the base, the LXi and even the Limited models. With the evolution of the other advanced key less technologies the existence of the Ignition Lock Cylinder was equally significant as the years of use and abuse cause the system to fail. Besides the improvement of the ignition system efficiency, this particular element also plays a role in the safety of the car. Notably, the Chrysler Concorde Ignition Lock Cylinder is differentiated in the automotive market by blending well with the vehicle Ignition Switch hence-passing current from the battery as soon as the key is turned to the START position. Therefore, together with securing the car and its compatibility with a wide range of models from Chrysler Concorde, the IGNITION LOCK CYLINDER is one of the best parts of the vehicle that has been manufactured to provide the best services required in the automobiles.

Chrysler Concorde Ignition Lock Cylinder Parts and Q&A

Ignition Lock Cylinder
5083915AB
Q: How to Replace an Ignition Lock Cylinder on Chrysler Concorde?
A:
The ignition switch lock cylinder is set into the housing farthest from the ignition and lets the key rotate to five different positions. Accessory, off (locked), Unlock, On/Run and Start. If there is a column shift on the car, you'll need to replace the interlock cassette when you install the cylinder, but for a floor shift, the interlock cable should be altered at the driver's floor shifter. Check the first thing with a lock is if it is factory-locked; if it is, then disconnect the negative cable from the battery and then the upper and lower covers from the steering column and take off the lever alongside the screw that holds it in place. Put the ignition key into the run spot and push down the retaining tab, then push the tab and pull the lock cylinder out. Push the key into the lock and turn it to start the mechanism to relieve pressure on the retaining tab. Guide the shaft at the edge of the lock cylinder directly into the socket in the housing, seeing that the socket is set to Run. Place the lock cylinder inside the housing, with its grooves lined up and push it so the tab shows from the other end. Turn the Off button and take the key out. If a column shift vehicle has received a new lock cylinder, place and adjust a new interlock cassette; for a floor shift vehicle, reposition or place the adaptor on the interlock cable. After that, put back on the upper and lower covers on the steering column, put the tilt lever in place and fix the negative cable to the battery.