How to Maintain and Fix a Thermostat on Chrysler Concorde?

Start the thermostat service and repair by first unhooking the negative cable from the remote jumper terminal. Never take off the pressure cap when the system is still hot and under pressure, to prevent dangerous burns. Drain the cooling system, following the instructions for cooling system service. First, remove the accessory drive belt so the generator can be taken out and then lift the vehicle with a hoist. Remove the bolts holding the thermostat to the generator and put the generator out of the way. Unhook the lower radiator and heater hoses of the thermostat housing, then remove the bolts securing the housing and finally pull out the thermostat and its housing. After you've cleaned the gasket sealing areas, install the thermostat with the bleed valve aligned at 12 o'clock and then put the gasket into the thermostat housing. Reconnect the cylinder block, thermostat and housing using bolts that are tightened to 12 Nm (105 inch lbs.). Connect the heater and lower radiator hoses, then fasten them with hose clamps. Attach the generator and hold it with its bolts, raise the vehicle and put in the accessory drive belt. Pour coolant into the system and then hook up the negative cable once more to the remote jumper terminal.

OEM Chrysler Concorde Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Thermostats found

View related parts
Chrysler Concorde Thermostat Part Number: 68027789AA
$30.38 MSRP: $44.50
You Save: $14.12 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Coolant Thermostat
- Replaces: 4792699AA, 4892107AA, 4892107AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LXi, Limited | 3.2L V6, 3.5L V6, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Thermostat Part Number: 4573560AE
Product Specifications
- Other Name: Thermostat - Water Pump; Engine Coolant Thermostat; Thermostat, Coolant
- Replaces: 4573560AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Thermostat Part Number: 4792237AE
$19.14 MSRP: $27.55
You Save: $8.41 (31%)
Product Specifications
- Other Name: Thermostat - Engine Coolant; Engine Coolant Thermostat; Thermostat Engine Coolant
- Replaces: 4792237AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX | 2.7L V6, 6 Cyl 2.7 L GAS

Chrysler Concorde Thermostat

Choose OEM Thermostat that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Thermostat follows strict manufacturing steps to lock in quality and fit. If your Chrysler Concorde matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Concorde parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

It must first be mentioned that the Thermostat is an essential component that establishes the dependability and power of Chrysler's full-sized sedan, the Concorde. Indeed, this thermostat is specifically designed to regulate the Chrysler Concorde's engine heat to ensure top performance and safety. Located right in the vicinity of the main radiator, the thermostat is a closed-loop control element since its operation depends on temperature fluctuations. It is very important for the improvement of several models of Chrysler Concorde manufactured from 1993 to 2004 for better performance. The advancements in thermostat technology in installation of the Chrysler Concorde have called for better systems that will enhance the facilitation of the engine as well as accommodate the comfort of the people. More importantly, this Thermostat suits most trims, and these include the entry level LX, the mid-level LXi and the high-end Limited edition. Automotive manufacturing has been characterized by this product in the sense that it has features that make it to expand and contract because of temperature. Thus, by keeping the engine temperature optimal, the Thermostat plays a huge role in increasing the performance as well as safety of the vehicle. Thermostat exhibits its quality and durability that makes it relevant in the proper handling of Chrysler Concorde and contributing to the automobile's reliability while in use.

Chrysler Concorde Thermostat Parts and Q&A

Thermostat
68027789AA
Q: How to Maintain and Fix a Thermostat on Chrysler Concorde?
A:
Start the thermostat service and repair by first unhooking the negative cable from the remote jumper terminal. Never take off the pressure cap when the system is still hot and under pressure, to prevent dangerous burns. Drain the cooling system, following the instructions for cooling system service. First, remove the accessory Drive Belt so the generator can be taken out and then lift the vehicle with a hoist. Remove the bolts holding the thermostat to the generator and put the generator out of the way. Unhook the lower radiator and heater hoses of the Thermostat Housing, then remove the bolts securing the housing and finally pull out the thermostat and its housing. After you've cleaned the gasket sealing areas, install the thermostat with the bleed valve aligned at 12 o'clock and then put the gasket into the thermostat housing. Reconnect the cylinder block, thermostat and housing using bolts that are tightened to 12 Nm (105 inch lbs.). Connect the heater and lower radiator hoses, then fasten them with hose clamps. Attach the generator and hold it with its bolts, raise the vehicle and put in the accessory drive belt. Pour coolant into the system and then hook up the negative cable once more to the remote jumper terminal.