How to Maintain and Repair Door Moldings and Weatherstrips on Chrysler Sebring?

You should start by loosening the screw holding the front end of the molding to the rear door. After that, separate the clips locking the end of the belt molding to the door. Tap a rubber mallet gently against a block of wood and place the block against each clip, pushing up to separate the molding from the door. During installation, fasten the belt molding to the door by pushing or tapping downward at each clip. After that, put the rear clips into the rear door and lastly, screw the front part of the molding securely in place.

How to Service and Repair Door Moldings on Rear Window Glass on Chrysler Pacifica?

Before you can service and repair the weather strip or molding around the rear door window, first lower the window all the way. Take out the rear inner molding weather strip as well as the fixed glass run channel. Remove the screws from the outer belt molding that hold it in place along the inside part of the rear door at the B-pillar and C-pillar. Use tool #9093 to insert it between the glass and edge of the mold in the rear, then move it ahead about 14 cm (5.5 in.). Firmly push down on the outside molding but keep the tool in place around the vehicle. Then, have someone move the top of the tool outwards while you pull up the molding. Do this as often as necessary until the molding can be taken off and then take out the outer belt weather strip. For putting on the molding, slide it into place and use a gentle hammer to press down or tap it until it has attached properly. Reinstall the screws for the belt molding at both B- and C-pillars, then add the fixed glass run channel, the rear inner molding weather strip and the door trim panel. After that, close the window.

OEM Chrysler Door Moldings

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

535 Door Moldings found

View related parts
Chrysler Lower Molding Part Number: 68228677AB
$85.91 MSRP: $129.00
You Save: $43.09 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Sliding Door; Molding Sliding Door
- Replaces: 68228677AA
Fits the following Chrysler Models:
- Pacifica | 2017-2024 | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2020-2024 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Molding Part Number: 7AD95DX9AA
$21.72 MSRP: $31.80
You Save: $10.08 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Sliding Door; Molding Sliding Door
- Replaces: 5RT89DX9AC, 5RT89DX9AB
Fits the following Chrysler Models:
- Pacifica | 2017-2025 | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2020-2025 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Window Molding, Front Upper Passenger Side Part Number: 4805810AB
$120.45 MSRP: $160.00
You Save: $39.55 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Front Door; Front Right Upper Reveal Molding; Front Right Window Molding.; Upper Molding; Molding Front Door
- Position: Front Upper Passenger Side
Fits the following Chrysler Models:
- 300 | 2005-2010 | Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Body Side Molding, Rear Driver Side Part Number: 5179255AA
$138.08 MSRP: $183.00
You Save: $44.92 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Rear Door; Door Molding, Rear Left; Door Moldings
- Position: Rear Driver Side
- Replaces: WU27AXRAB, WU27WS2AB, WU27ZMQAB, WU27BPKAB, WU27BB8AB, WU27XWGAB, WU27AP4AB
Fits the following Chrysler Models:
- 300 | 2005 | Touring | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Applique, Front Passenger Side Part Number: 57010384AD
$99.02 MSRP: $147.00
You Save: $47.98 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Applique - B Pillar; Door Applique, Front Right; Door Moldings; Applique B Pillar Front
- Position: Front Passenger Side
- Replaces: 57010384AB, 57010384AC, 57010384AA
Fits the following Chrysler Models:
- 300 | 2011-2023 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, SRT8 Core, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Upper Molding Part Number: WW07CD7AD
$95.98 MSRP: $142.00
You Save: $46.02 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Sliding Door; Molding Sliding Door
- Replaces: WW07CD7AB, WW07CD7AA, WW07CD7AC
Fits the following Chrysler Models:
- Town & Country | 2005-2007 | Base, LX, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Frame Trim Part Number: 55315135AC
$34.14 MSRP: $50.00
You Save: $15.86 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Door Window Opening; Molding Door Window Opening
- Replaces: 55315135AB
Fits the following Chrysler Models:
- 300 | 2014-2023 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Body Side Molding, Front Driver Side Part Number: 5179253AA
$168.06 MSRP: $247.00
You Save: $78.94 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Front Door; Door Molding, Front Left; Door Moldings
- Position: Front Driver Side
- Replaces: WU23AP4AB, WU23XWGAB, WU23BB8AB, WU23DA4AB, WU23WS2AB, WU23BPKAB, WU23ZMQAB, WU23CYGAB, WU23SW1AB, WU23AXRAB
Fits the following Chrysler Models:
- 300 | 2005 | Touring | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Frame Trim, Rear Passenger Side Part Number: 55315137AC
$34.88 MSRP: $51.00
You Save: $16.12 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Door Window Opening; Door Opening Trim, Rear Right; Molding Door Window Opening
- Position: Rear Passenger Side
- Replaces: 55315137AB
Fits the following Chrysler Models:
- 300 | 2011-2023 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, SRT8 Core, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Applique, Front Driver Side Part Number: 5109455AD
$92.96 MSRP: $107.00
You Save: $14.04 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Door Window Opening; Door Applique, Front Left; Door Moldings; Molding Door Window Opening B Pillar; Molding Door Window Opening
- Position: Front Driver Side
- Replaces: 5109455AC, 5109455AB, 5109455AA
Fits the following Chrysler Models:
- Town & Country | 2005-2007 | Base, LX, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Window Molding, Black, Rear Driver Side Part Number: 4805685AH
$58.98 MSRP: $339.00
You Save: $280.02 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Rear Door; Door Reveal Molding, Rear Left; Molding Rear Door Dlo
- Position: Rear Driver Side
- Replaces: 4805685AG, 4805685AE, 4805685AF, 4805685AD
Fits the following Chrysler Models:
- Concorde | 2002-2004 | LX, LXi, Limited | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Window Molding, Black, Rear Passenger Side Part Number: 4805684AH
$62.42 MSRP: $358.00
You Save: $295.58 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Rear Door; Door Reveal Molding, Rear Right; Molding Rear Door Dlo
- Position: Rear Passenger Side
- Replaces: 4805684AF, 4805684AE, 4805684AD, 4805684AG
Fits the following Chrysler Models:
- Concorde | 2002-2004 | LX, LXi, Limited | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Side Molding Part Number: HU91TZZ
$29.46 MSRP: $169.00
You Save: $139.54 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Sliding Door; Door Moldings
Fits the following Chrysler Models:
- Town & Country | 1996-2000 | Base, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Molding, Front Part Number: 5017990AA
$27.69 MSRP: $159.00
You Save: $131.31 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Front Door; Door Moldings
- Position: Front
Fits the following Chrysler Models:
- Town & Country | 1993 | Base | 6 Cyl 3.3 L GAS
View related parts
Chrysler Window Trim, Front Driver Side Part Number: 1AY79XXXAC
$181.46 MSRP: $385.00
You Save: $203.54 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Door Window Opening; Door Window Molding, Front Left; Molding Door Window Opening
- Position: Front Driver Side
- Replaces: 1AY79XXXAB, 1AY79XXXAA
Fits the following Chrysler Models:
- 300 | 2005-2009 | Base, C, C SRT8, LX, Limited, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Side Molding, Black Part Number: ZR66RXFAA
$85.49 MSRP: $177.00
You Save: $91.51 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Sliding Door; Door Moldings; Molding Sliding Door
Fits the following Chrysler Models:
- Town & Country | 2008 | LX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Applique, Front Driver Side Part Number: 4806091AD
$34.98 MSRP: $66.25
You Save: $31.27 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Applique - Front Door; Door Reveal Molding, Front Left; Door Applique, Front Left; Door Moldings
- Position: Front Driver Side
- Replaces: 4806091AC
Fits the following Chrysler Models:
- 300 | 2005 | C, Touring | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chrysler Upper Molding Part Number: TW01TZZAC
$80.46 MSRP: $154.00
You Save: $73.54 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding - Sliding Door
- Replaces: TW01WB7AC, TW01WS2AC, TW01XGRAC, TW01SW1AC, TW01XBQAC, TW01VTEAC, TW01WELAC, TW01XRVAC
Fits the following Chrysler Models:
- Town & Country | 2001-2003 | LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Applique, Rear Passenger Side Part Number: 4806092AD
$35.57 MSRP: $64.45
You Save: $28.88 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Applique - Rear Door; Door Applique, Rear Right; Rear Panel Applique
- Position: Rear Passenger Side
- Replaces: 4806092AC
Fits the following Chrysler Models:
- 300 | 2005 | C, Touring | 2.7L V6, 3.5L V6, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chrysler Body Side Molding, Rear Driver Side Part Number: 4806351AB
Product Specifications
- Other Name: Applique - Rear Door; Door Molding, Rear Left; Door Moldings; Molding Rear Door
- Position: Rear Driver Side
- Replaces: 4806351AA
Fits the following Chrysler Models:
- 300 | 2006-2007 | C | 2.7L V6, 3.5L V6, 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS

| Page 1 of 27 |Next >

1-20 of 535 Results

Chrysler Door Moldings

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Door Moldings for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Door Moldings protect the guard side panels against being hit in the parking lot and they also provide clean lines. Since 1925, Chrysler has been pursuing good build and easy rides beginning with Floating Power which silenced engine vibrations. The Airflow shape was a bold one that reflected how the company combined the management of airflow with comfort in the cabin for ordinary drivers. Subsequently, the original practical minivan provided convenient access and comfortable seats that families soon found to rely on. The simple purchasing was maintained by clear pricing which showed that Chrysler was equally fond of value as it was of style. The brand continued to extend interior space, enhance ride quality, and increase day-to-day usefulness over decades. Every addition proved that Chrysler cares about the design that makes every ride more relaxing and pleasant. Door Moldings are tough strips of plastic, stainless steel, or chrome, which are placed along the doors to absorb sudden door dings. Door Moldings save money and irritation for drivers by taking blows before they hit painted metal, thus preventing annoying chips. Smooth edges allow Door Moldings to blend with the lines of the car making protection look like it is nailed in place. The ease of attaching them is simple: clipping or adhesive, which means that owners can attach them using their fingers without drills and other tools, and Chrysler fans can maintain the panels in the original state. Door Moldings are both protective and attractive since they are protecting edges and belt lines at the same time.

Chrysler Door Moldings Parts and Q&A

Belt Molding, Front Passenger Side
4805322AD
Q: How to Maintain and Repair Door Moldings and Weatherstrips on Chrysler Sebring?
A:
You should start by loosening the screw holding the front end of the molding to the rear door. After that, separate the clips locking the end of the belt molding to the door. Tap a rubber mallet gently against a block of wood and place the block against each clip, pushing up to separate the molding from the door. During installation, fasten the belt molding to the door by pushing or tapping downward at each clip. After that, put the rear clips into the rear door and lastly, screw the front part of the molding securely in place.
Body Side Molding, Rear Passenger Side
5174848AA
Q: How to Service and Repair Door Moldings on Rear Window Glass on Chrysler Pacifica?
A:
Before you can service and repair the weather strip or molding around the rear door window, first lower the window all the way. Take out the rear inner molding weather strip as well as the fixed glass run channel. Remove the screws from the outer belt molding that hold it in place along the inside part of the rear door at the B-pillar and C-pillar. Use tool #9093 to insert it between the glass and edge of the mold in the rear, then move it ahead about 14 cm (5.5 in.). Firmly push down on the outside molding but keep the tool in place around the vehicle. Then, have someone move the top of the tool outwards while you pull up the molding. Do this as often as necessary until the molding can be taken off and then take out the outer belt weather strip. For putting on the molding, slide it into place and use a gentle hammer to press down or tap it until it has attached properly. Reinstall the screws for the belt molding at both B- and C-pillars, then add the fixed glass run channel, the rear inner molding weather strip and the door trim panel. After that, close the window.