How to Service and Repair Exterior Emblems on Chrysler Crossfire?

Before taking off the exterior name plates, mark where the will need to be placed after service and repair. To take off a name plate attached with double-sided tape, first use a heat gun on the tape and motion it in a circle and then gaps can be formed at the corners of the plate with a nonmetallic device to lift the name plate off the program. Scrub away any extra adhesive or tape using a gentle adhesive remover. If the adhesives are used instead of screws, mark the reference points and heat them the same way you would with screws. Lightly peel the label away from the surface after applying heat and using your fingernail and then simply wipe away any residual stickiness with a general-purpose remover. Before installing with double-sided tape, apply a Wax and Grease cleaner to the painted surface, position the badging so that the reference points match and press down firmly so the badging sticks well before wiping away the reference marks. For installation with adhesives, clean your painted surface with isopropyl alcohol, remove the backing paper, lay the badging against your selected points or another panel and gently smooth it down using a plastic spreader to pop air bubbles. To finish, take off the top protective carrier and get rid of indicated references.

How to Maintain and Restore the Body Emblem on Chrysler Pacifica?

Before you take out the body emblem, first note its proper positions. Apply heat to the area by going around with the heat gun to soften the bond between the sticker and the phone. Hold your fingernail under the name or tape and use it to gently lift and remove it as heat is applied. After that, wipe off all adhesive left on the panel(s) with a general adhesive remover.

OEM Chrysler Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

99 Emblems found

View related parts
Chrysler Emblem, Black Part Number: 68147521AA
$81.52 MSRP: $122.00
You Save: $40.48 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Chrysler Wing
Fits the following Chrysler Models:
- 300 | 2011-2014 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Emblem, Rear Part Number: 4805988AB
$94.44 MSRP: $141.00
You Save: $46.56 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament; Deck Lid Emblem, Rear
- Position: Rear
Fits the following Chrysler Models:
- 300 | 2005-2007 | Base, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Nameplate, Rear Part Number: 5303620AA
$57.44 MSRP: $84.60
You Save: $27.16 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate - Gt; Deck Lid Emblem, Rear; Hatch Emblem, Rear; Nameplate Gt Gt; Nameplate Gt
- Position: Rear
Fits the following Chrysler Models:
- PT Cruiser | 2001-2006 | Base, Dream, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Emblem, Front Part Number: 68231800AC
$57.95 MSRP: $85.30
You Save: $27.35 (33%)
ADD TO CART
Product Specifications
- Other Name: Nameplate - Grille; Grille Emblem, Front
- Position: Front
- Replaces: 68231800AB
Fits the following Chrysler Models:
- 300 | 2015-2019 | C, C Platinum, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler Medallion, Gold, Front Part Number: 4805157
$67.70 MSRP: $99.65
You Save: $31.95 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament - Fascia; Grille Emblem, Front; Medallion Fascia
- Position: Front
Fits the following Chrysler Models:
- Town & Country | 2007-2010 | Base, LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Emblem, Rear Part Number: 68081543AA
$75.46 MSRP: $112.00
You Save: $36.54 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grille Emblem, Front; Hatch Emblem, Rear; Nameplate; Emblem Chrysler Grille Emblem
- Position: Rear
Fits the following Chrysler Models:
- Town & Country | 2011-2016 | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Emblem, Black Part Number: 68370946AA
$85.99 MSRP: $128.00
You Save: $42.01 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Winged Victory Complete Assembly
Fits the following Chrysler Models:
- Pacifica | 2018-2020 | AWD Launch Edition, Hybrid Limited, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2020 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Emblem, Rear Part Number: 68081545AA
$92.68 MSRP: $138.00
You Save: $45.32 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem - Decklid; Deck Lid Emblem, Rear; Emblem Decklid Winged Victory Decklid; Emblem Decklid Winged Victory; Emblem Chrysler Wing
- Position: Rear
Fits the following Chrysler Models:
- 200 | 2011-2014 | LX, Limited, S, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Hub Cap, Center Part Number: 4895432AA
$95.40 MSRP: $143.00
You Save: $47.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Center Cap; Cap Wheel Center
- Position: Center
- Replaces: 4895439AA
Fits the following Chrysler Models:
- 300 | 2008-2010 | C, C SRT8, LX, Limited, S, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Ornament, Front Part Number: 68174585AB
$100.84 MSRP: $150.00
You Save: $49.16 (33%)
ADD TO CART
Product Specifications
- Other Name: Emblem; Grille Emblem, Front; Emblem Winged Victory
- Position: Front
- Replaces: 68174585AA
Fits the following Chrysler Models:
- 200 | 2015-2017 | C, LX, Limited, S | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Molding Part Number: 5182602AD
$175.62 MSRP: $258.00
You Save: $82.38 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem - Chrysler Wing; Emblem Chrysler Wing Hood Molding With Emblem; Emblem Chrysler Wing Hood; Molding Hood
Fits the following Chrysler Models:
- 200 | 2013-2014 | LX, Limited, S, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Center Cap Part Number: 6ES82SZ0AA
$30.55 MSRP: $44.70
You Save: $14.15 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Replaces: 1LB74SZ0AB, 1LB74SZ0AA
Fits the following Chrysler Models:
- 200 | 2015-2017, 2011-2012 | C, LX, Limited, S, Touring | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
- 300 | 2011-2023 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, SRT8 Core, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
- Pacifica | 2017-2020 | AWD Launch Edition, Hybrid Limited, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Town & Country | 2011-2016 | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Voyager | 2020 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View More
View related parts
Chrysler Center Cap, Bronze Part Number: 1LB74NTSAB
$35.27 MSRP: $52.30
You Save: $17.03 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
Fits the following Chrysler Models:
- 300 | 2018-2023 | C, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Center Cap, Black Part Number: 1LB74DX8AB
$48.89 MSRP: $70.30
You Save: $21.41 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Replaces: 1LB74DX8AA
Fits the following Chrysler Models:
- 200 | 2015-2017 | C, LX, Limited, S | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
- 300 | 2014-2023 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Center Cap Part Number: 1LB74SZ7AB
$49.31 MSRP: $72.15
You Save: $22.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Replaces: 1LB74SZ7AA
Fits the following Chrysler Models:
- 200 | 2011-2017 | C, LX, Limited, S, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
- 300 | 2011-2023 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, SRT8 Core, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
- Pacifica | 2017-2020 | AWD Launch Edition, Hybrid Limited, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Town & Country | 2013-2016, 2011 | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Voyager | 2020 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View More
View related parts
Chrysler Medallion, Front Part Number: 4857406AA
$64.62 MSRP: $81.92
You Save: $17.30 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament - Winged Medallion; Grille Emblem, Front; Plinth Winged Medallion With Medallion; Plinth Winged Medallion
- Position: Front
Fits the following Chrysler Models:
- Town & Country | 2001-2004 | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2001-2003 | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Emblem, Rear Part Number: 4805065AB
$55.30 MSRP: $63.45
You Save: $8.15 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament - Decklid; Deck Lid Emblem, Rear; Nameplate; Emblem Decklid Winged Victory
- Position: Rear
Fits the following Chrysler Models:
- Concorde | 1998-2004 | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
- LHS | 1999-2001 | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler Emblem Part Number: 5288164
Product Specifications
- Other Name: Ornament Chrysler Grille; Medallion, Grille; Medallion Grille
Fits the following Chrysler Models:
- Sebring | 1996-1998 | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Emblem, Front Part Number: 4805526AA
Product Specifications
- Other Name: Ornament - Fascia; Bumper Cover Emblem, Front; Medallion Fascia
- Position: Front
Fits the following Chrysler Models:
- Sebring | 2001-2004 | Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Emblem, Front Part Number: 4805259AA
Product Specifications
- Other Name: Ornament - Fascia; Grille Emblem, Front; Medallion Fascia
- Position: Front
Fits the following Chrysler Models:
- Sebring | 2001-2004 | Base, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 5 |Next >

1-20 of 99 Results

Chrysler Emblem

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Emblem for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Emblem Parts and Q&A

Emblem, Rear
1BJ09401AB
Q: How to Service and Repair Exterior Emblems on Chrysler Crossfire?
A:
Before taking off the exterior name plates, mark where the will need to be placed after service and repair. To take off a name plate attached with double-sided tape, first use a heat gun on the tape and motion it in a circle and then gaps can be formed at the corners of the plate with a nonmetallic device to lift the name plate off the program. Scrub away any extra adhesive or tape using a gentle adhesive remover. If the adhesives are used instead of screws, mark the reference points and heat them the same way you would with screws. Lightly peel the label away from the surface after applying heat and using your fingernail and then simply wipe away any residual stickiness with a general-purpose remover. Before installing with double-sided tape, apply a Wax and Grease cleaner to the painted surface, position the badging so that the reference points match and press down firmly so the badging sticks well before wiping away the reference marks. For installation with adhesives, clean your painted surface with isopropyl alcohol, remove the backing paper, lay the badging against your selected points or another panel and gently smooth it down using a plastic spreader to pop air bubbles. To finish, take off the top protective carrier and get rid of indicated references.
Emblem
4857662AE
Q: How to Maintain and Restore the Body Emblem on Chrysler Pacifica?
A:
Before you take out the body emblem, first note its proper positions. Apply heat to the area by going around with the heat gun to soften the bond between the sticker and the phone. Hold your fingernail under the name or tape and use it to gently lift and remove it as heat is applied. After that, wipe off all adhesive left on the panel(s) with a general adhesive remover.