How to Replace a Hood Hinge on Chrysler LHS?

Put support under the hood you will be removing, then mark the spots for all the screws and bolts with a grease pencil. De-attach the gas prop lock caps and gas prop from the hinge, then take away the screws that hold the hood to the hinge. After that, unfasten the bracket bolts attaching the hood hinge to the load beam wall, then pull out the hinge, since you must take out the wiper motor to get to the lower left side of the hood hinge. Should you paint the hinge, do so before putting it into position on the vehicle and install the bolts that attach the hinge to the load beam wall. Affix the hooks that fit into your hinge system and tighten them so that all marks line up. A 4 mm (0.160 in.) distance to the front fenders and an even surface along the top of the fenders should be maintained by the hood. Hold the hood high or low with the hinge to body bolts and then tighten all the bolts to a torque of 22.6 to 33.9 N.m (200 to 300 in.lbs.). Attach the gas prop to the vehicle, lock it in place with the cap, bring the wiper motor assembly together and then raise the hood and check its behavior without supporting it.

OEM Chrysler LHS Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Hinges found

View related parts
Chrysler LHS Hinge, Front Passenger Side Part Number: 4580138AH
$10.88 MSRP: $62.40
You Save: $51.52 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 4580138AG, 4580138AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Hinge, Front Driver Side Part Number: 4580139AH
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 4580139AD, 4580139AF, 4580139AG, 4580139AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 3.5L V6, 6 Cyl 3.5 L GAS

Chrysler LHS Hood Hinge

Choose OEM Hood Hinge that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Hood Hinge follows strict manufacturing steps to lock in quality and fit. If your Chrysler LHS matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine LHS parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The hood hinge of Chrysler LHS shows exceptional reliability and performance within the entire Chrysler LHS vehicle series. As the main support structure for the hood while enabling convenient engine inspection the hood hinge functions as a core element for both safety performance and operational efficiency of the vehicle. The Chrysler LHS has two hood hinges installed by default that both enable effortless hood opening and safe hood closure to avoid accidental hood gaps. The Chrysler LHS Hood Hinge shows exceptional versatility because it supports all LHS production models starting from 1994 through 2001 thus serving as an essential element for vehicle operational integrity. The hood hinge requires periodic maintenance alongside a proper replacement schedule for the proper functioning of both safety and efficiency because worn hinges create serious performance problems. An affordable automotive replacement component is the car Hood Hinge which features an easy installation procedure while its replacement parts lean toward a cost range between $10 to $90. Owning the car provides reliable driving because of its robust design and straightforward maintenance procedure. As a sturdy component which greatly influences Chrysler model performance the hood hinge demonstrates the automaker's dedication to engineering excellence and quality production.

Chrysler LHS Hood Hinge Parts and Q&A

Hinge, Front Passenger Side
4580138AH
Q: How to Replace a Hood Hinge on Chrysler LHS?
A:
Put support under the hood you will be removing, then mark the spots for all the screws and bolts with a grease pencil. De-attach the gas prop lock caps and gas prop from the hinge, then take away the screws that hold the hood to the hinge. After that, unfasten the bracket bolts attaching the hood hinge to the load beam wall, then pull out the hinge, since you must take out the Wiper Motor to get to the lower left side of the hood hinge. Should you paint the hinge, do so before putting it into position on the vehicle and install the bolts that attach the hinge to the load beam wall. Affix the hooks that fit into your hinge system and tighten them so that all marks line up. A 4 mm (0.160 in.) distance to the front fenders and an even surface along the top of the fenders should be maintained by the hood. Hold the hood high or low with the hinge to body bolts and then tighten all the bolts to a torque of 22.6 to 33.9 N.m (200 to 300 in.lbs.). Attach the gas prop to the vehicle, lock it in place with the cap, bring the wiper motor assembly together and then raise the hood and check its behavior without supporting it.