How Does Wheelhouse Handle Rear Fender Liner Service and Repair on Chrysler LHS?

First, hoist and support the vehicle on safety stands then remove the rear wheel to service and repair the rear fender liner. Next take out the fasterners that hold the splash shield in place, cut out the shock tower area in the splash shield to make its removal and installation easier. After unravelling the splash shield off the vehicle, put the new or repaired splash shield in place with the shock tower cut out and install the fasteners to lock it into place. Lastly, drop the vehicle and reinstall the rear wheel.

How Does Wheelhouse Assist in Servicing the Front Fender Liner on Chrysler LHS?

To start, jack up and secure the vehicle on safety stands and then remove the front wheel. After that, remove the strut assembly from your car or truck. Loosen the screws attaching the speed sensor bracket so you can pull apart the speed sensor wire connector. Afterward, disconnect the fasteners that hold the splash shield onto the inner wheelhouse and take the splash shield from the car. Lift up the splash shield and then set the fasteners to hold it in place. Reattach the wir Reinstall the strut assembly, put the front wheel on and then lower your vehicle.

OEM Chrysler LHS Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Wheelhouses found

View related parts
Chrysler LHS Wheelhouse Liner, Rear Passenger Side Part Number: 4575412AI
$71.84 MSRP: $103.00
You Save: $31.16 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Wheelhouse; Quarter Panel Splash Shield, Rear Right; Fender Splash Shield; Shield Wheelhouse
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Shield, Rear Part Number: 4624767
$3.30 MSRP: $4.18
You Save: $0.88 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Rear Wheelhouse Splash; Shield, Rear Wheelhouse Splash; Shield Wheelhouse
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Fender Liner, Front Driver Side Part Number: 4580487AF
Product Specifications
- Other Name: Shield - Wheelhouse; Fender Splash Shield, Front Left; Shield Wheelhouse; Fender Splash Shield
- Position: Front Driver Side
- Replaces: 4580487AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Fender Liner, Front Passenger Side Part Number: 4580486AF
Product Specifications
- Other Name: Shield - Wheelhouse; Fender Splash Shield, Front Right; Shield Wheelhouse; Fender Splash Shield
- Position: Front Passenger Side
- Replaces: 4580486AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Shield, Rear Part Number: 4624766
Product Specifications
- Other Name: Shield Rear Wheelhouse Splash; Shield, Rear Wheelhouse Splash; Shield Wheelhouse
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Fender Liner Part Number: 4583965
Product Specifications
- Other Name: Shield; Shield, Front Fender Splash; Shield Wheelhouse
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Fender Liner Part Number: 4583964
Product Specifications
- Other Name: Shield; Shield, Front Fender Splash; Shield Wheelhouse
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Wheelhouse Liner, Rear Driver Side Part Number: 4575413AI
Product Specifications
- Other Name: Shield - Wheelhouse; Quarter Panel Splash Shield, Rear Left; Fender Splash Shield; Shield Wheelhouse
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS

Chrysler LHS Wheelhouse

Choose OEM Wheelhouse that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Wheelhouse follows strict manufacturing steps to lock in quality and fit. If your Chrysler LHS matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine LHS parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler LHS Wheelhouse Parts and Q&A

Wheelhouse Liner, Rear Driver Side
4575413AI
Q: How Does Wheelhouse Handle Rear Fender Liner Service and Repair on Chrysler LHS?
A:
First, hoist and support the vehicle on safety stands then remove the rear wheel to service and repair the rear fender liner. Next take out the fasterners that hold the splash shield in place, cut out the shock tower area in the splash shield to make its removal and installation easier. After unravelling the splash shield off the vehicle, put the new or repaired splash shield in place with the shock tower cut out and install the fasteners to lock it into place. Lastly, drop the vehicle and reinstall the rear wheel.
Fender Liner, Front Driver Side
4580487AF
Q: How Does Wheelhouse Assist in Servicing the Front Fender Liner on Chrysler LHS?
A:
To start, jack up and secure the vehicle on safety stands and then remove the front wheel. After that, remove the strut assembly from your car or truck. Loosen the screws attaching the speed sensor bracket so you can pull apart the speed sensor wire connector. Afterward, disconnect the fasteners that hold the splash shield onto the inner wheelhouse and take the splash shield from the car. Lift up the splash shield and then set the fasteners to hold it in place. Reattach the wir Reinstall the strut assembly, put the front wheel on and then lower your vehicle.