How to Ensure Proper Installation and Positioning of the Lower Control Arm Mounting Nuts on Chrysler Pacifica?

Set the lower control arm into the holders located on the engine cradle. Place the flags on the mounting nuts properly before securing the lower control arm-to-cradle rear mounting bolts: the flag on the left nut should point up and on the right nut, should point down. It's easy to figure out how the front mounting nuts work. In the next step, fit the bolts between the bushings on the lower control arm and the engine cradle, thread them from the back into the flag nuts, but don't tighten at this moment. After that, secure the steering knuckle, brake rotor and caliper and put on the tire and wheel together, using 135 Nm (100 ft. lbs.) of torque when tightening the wheel nuts. Set the vehicle down on the alignment rack or hoist and raise it as needed to find the mounting bolts. Twist the lower control arm frame bolts to a torque of 163 Nm (120 ft. lbs.) before performing a wheel alignment.

How to Remove and Replace the Front Lower Control Arm on Chrysler Pacifica?

Support the vehicle by raising it, then complete the replacement of the control arm. Then, remove the three nuts holding the wheels by hand and lift the tire and wheel off the vehicle. Also, pop out the knuckle. Go ahead and remove the two bolts and nuts holding the lower control arm to the engine cradle and then pull out the lower control arm.

OEM Chrysler Pacifica Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Control Arms found

View related parts
Chrysler Pacifica Lower Control Arm Part Number: 68319316AA
$506.09 MSRP: $769.00
You Save: $262.91 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Control Arm
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Lower Control Arm Part Number: 68319317AA
$514.93 MSRP: $781.00
You Save: $266.07 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Control Arm
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Lower Control Arm Part Number: 5274643AA
$534.82 MSRP: $812.00
You Save: $277.18 (35%)
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm
- Position: Lower
- Replaces: 68229021AG, 68229021AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Lower Control Arm Part Number: 5274642AA
$534.82 MSRP: $812.00
You Save: $277.18 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm
- Position: Lower
- Replaces: 68229020AF, 68229020AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Lower Control Arm, Front Driver Side Part Number: 4743477AI
Product Specifications
- Other Name: Arm - Control; Front Left Suspension Control Arm and Ball Joint Assembly.; Arm Control; Control Arm
- Position: Front Driver Side
- Replaces: 4743477AH, 4743477AF, 4743477AG, 4743477AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Lower Control Arm, Front Passenger Side Part Number: 4743476AI
Product Specifications
- Other Name: Arm - Control; Front Right Suspension Control Arm and Ball Joint Assembly.; Arm Control; Control Arm
- Position: Front Passenger Side
- Replaces: 4743476AG, 4743476AF, 4743476AH, 4743476AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

Chrysler Pacifica Control Arm

Choose OEM Control Arm that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Control Arm follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Pacifica Control Arm is a very important part of the vehicle hence plays a major role in improving the reliability of the vehicle. As an attachment point between the Chrysler Pacifica's frame and its wheels, the Control Arm enables the movements of the suspension system in order to accommodate irregularities that may be present on the roads. This adaptability is important for ensuring correct wheel setting on the Chrysler Pacifica and this relates to safety and handling of the car. Pacifica models have a diverse type of Control Arms in which there are the stamped steel design, while others include the cast iron or aluminum design although stronger they are lighter than the stamped steel. Albeit offers stamped+steel control arms good and firm, Rust might affect the integrity of the control arm. However, contemporary materials used in the manufacturing for example the DOM tubular steel and the billet aluminium offer better performance particularly during aggressive use of the car. Chrysler Pacifica Control Arm can handle higher stresses and therefore can fit wider wheels along with other different heights in order to maximize the control that the car can demonstrate. This makes it a special selling point in the market especially in the Chrysler Pacifica which has resulted to increased efficiency and safety. One of the notable achievements of the Chrysler Pacifica Minivan is that was considered as the optimal Minivan of 2016 and the recent one was considered as the 2020 optimal Family Car; where the Chrysler Pacifica Control Arm is considered as the crucial component that helps in continuing the car's reliability and performance across the models.

Chrysler Pacifica Control Arm Parts and Q&A

Lower Control Arm, Front Driver Side
4743477AI
Q: How to Ensure Proper Installation and Positioning of the Lower Control Arm Mounting Nuts on Chrysler Pacifica?
A:
Set the lower control arm into the holders located on the engine cradle. Place the flags on the mounting nuts properly before securing the lower control arm-to-cradle rear mounting bolts: the flag on the left nut should point up and on the right nut, should point down. It's easy to figure out how the front mounting nuts work. In the next step, fit the bolts between the bushings on the lower control arm and the engine cradle, thread them from the back into the flag nuts, but don't tighten at this moment. After that, secure the Steering Knuckle, brake rotor and caliper and put on the tire and wheel together, using 135 Nm (100 ft. lbs.) of torque when tightening the wheel nuts. Set the vehicle down on the alignment rack or hoist and raise it as needed to find the mounting bolts. Twist the lower control arm frame bolts to a torque of 163 Nm (120 ft. lbs.) before performing a wheel alignment.
Lower Control Arm, Front Passenger Side
4743476AI
Q: How to Remove and Replace the Front Lower Control Arm on Chrysler Pacifica?
A:
Support the vehicle by raising it, then complete the replacement of the control arm. Then, remove the three nuts holding the wheels by hand and lift the tire and wheel off the vehicle. Also, pop out the knuckle. Go ahead and remove the two bolts and nuts holding the lower control arm to the engine cradle and then pull out the lower control arm.