How to Install a Steering Column Cover on Chrysler Pacifica?

Now to install the steering column cover, place the lower shroud (6) and upper shroud (3) around the steering column (1). On both sides snap the shrouds together at the locking tab locations. Install the center mounting screw to fasten with the lower shroud to the column and tighten to 2 Nm (18 in. lbs.), below. Next, place the two outer mounting screws (7) in the threaded holes from the inside of the lower shroud into the threaded holes of the upper shroud and tighten these screws to 2 Nm (18 in. lbs.). Finally, check the shroud mating surfaces for too large gaps and adjust accordingly.

How to Remove the Steering Column Cover on Chrysler Pacifica?

You should take out the two screws holding the opening cover onto the instrument panel to remove it. Pull the cover from the rear and upward to take off the steering column opening cover.

OEM Chrysler Pacifica Steering Column Cover

Steering Column Cover Bezel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Steering Column Covers found

View related parts
Chrysler Pacifica Column Filler, Brown Part Number: 5RL41GTVAD
$99.48 MSRP: $149.00
You Save: $49.52 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Instrument - Steering Column Shroud; Steering Column Cover; Gap Hider Steering Column Shroud
- Replaces: 5RL41GTVAA, 5RL41GTVAC, 5RL41GTVAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2019 Chrysler Pacifica | Hybrid Limited, Hybrid Platinum, Hybrid Premium, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Lower Cover, Black, Outer Driver Side Part Number: 6EL32DX9AA
$157.49 MSRP: $233.00
You Save: $75.51 (33%)
ADD TO CART
Product Specifications
- Other Name: Cover - Steering Column; Instrument Panel Cover, Left Outer; Cover Steering Column
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Lower Shroud Part Number: 5RL43GTVAA
$8.29 MSRP: $11.95
You Save: $3.66 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Shroud Steering Column Lower
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2022 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Upper Shroud Part Number: 5RL42GTVAB
$9.22 MSRP: $13.25
You Save: $4.03 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Upper; Shroud Steering Column Upper
- Position: Upper
- Replaces: 5RL42GTVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2022 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Shroud - Steering Column Part Number: 7TG77DX9AA
$10.21 MSRP: $14.70
You Save: $4.49 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SHROUD-STEERING COLUMN
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Shroud - Steering Column Part Number: 7TG78DX9AA
$12.06 MSRP: $17.35
You Save: $5.29 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SHROUD-STEERING COLUMN
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Lower Cover, Gray, Outer Driver Side Part Number: 6EL32PD2AA
$157.49 MSRP: $233.00
You Save: $75.51 (33%)
Product Specifications
- Other Name: Cover - Steering Column; Instrument Panel Cover, Left Outer; Cover Steering Column
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Dust Shield, Inner Part Number: 4680523AD
Product Specifications
- Other Name: Shroud - Steering Column; Steering Coupling Boot, Inner; Inner Cover; Shroud Steering Column; Cover Steering Column
- Position: Inner
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Dust Shield, Outer Part Number: 4680543AD
Product Specifications
- Other Name: Shroud - Dash Silencer; Steering Coupling Boot, Outer; Outer Cover; Shroud Steering Column; Shell Dash Silencer
- Position: Outer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Cover Plate, Taupe Part Number: UF901L2AC
Product Specifications
- Other Name: Cover - Steering Column Cover; Instrument Panel Cover; Plate Steering Column Cover
- Replaces: UF901L2AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Cover Plate, Gray Part Number: UF90XDVAC
Product Specifications
- Other Name: Cover - Steering Column Cover; Instrument Panel Cover; Plate Steering Column Cover
- Replaces: UF90XDVAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS

Chrysler Pacifica Steering Column Cover

Choose OEM Steering Column Cover that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Steering Column Cover follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Pacifica Steering Column Cover Parts and Q&A

Dust Shield, Inner
4680523AD
Q: How to Install a Steering Column Cover on Chrysler Pacifica?
A:
Now to install the Steering Column cover, place the lower shroud (6) and upper shroud (3) around the steering column (1). On both sides snap the shrouds together at the locking tab locations. Install the center mounting screw to fasten with the lower shroud to the column and tighten to 2 Nm (18 in. lbs.), below. Next, place the two outer mounting screws (7) in the threaded holes from the inside of the lower shroud into the threaded holes of the upper shroud and tighten these screws to 2 Nm (18 in. lbs.). Finally, check the shroud mating surfaces for too large gaps and adjust accordingly.
Dust Shield, Outer
4680543AD
Q: How to Remove the Steering Column Cover on Chrysler Pacifica?
A:
You should take out the two screws holding the opening cover onto the instrument panel to remove it. Pull the cover from the rear and upward to take off the steering column opening cover.