How to Maintain and Fix a Wiper Switch on Chrysler Pacifica?

The first step of wiper switch servicing is to detach and isolate the battery's negative cable. Let the air bag system reserve capacitor discharge for two minutes to avoid accidental use of the air bags which might cause unintentional injury or death. Remove the upper and lower steering column shrouds from the wheel as the next step. Cut the wire from the cluster and separate the connector for the right multi-function switch. After that, get rid of the two screws holding the right multi-function switch in place and remove the switch from the mounting housing.

How to Service the Right Wiper Switch on Chrysler Pacifica?

Before handling the right multifunction switch, disconnect the negative side of the battery and wait for two minutes for the air bag reserve capacitor to empty. Take away the upper and lower covers on the tops of the steering column, then unplug the instrument panel wire harness from the right multi-function switch. After that, unscrew the two screws holding the right multi-function switch to the multi-function switch mounting housing and remove the switch. To install the right multi-function switch, mount it on the mounting housing and hold it with the two screws, scarfing them to 2.5 Nm (22 in. lbs). Connect the wire harness at the instrument panel to the switch, insert the upper and lower steering column covers and secure each with 2 Nm (17 in. lbs) of torque. After that, link the battery negative cable and make sure all vehicle functions are working properly.

OEM Chrysler Pacifica Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wiper Switches found

View related parts
Chrysler Pacifica Wiper Switch Part Number: 5082035AA
$374.75 MSRP: $475.06
You Save: $100.31 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Windshield Wiper; Windshield Wiper Switch; Windshield Washer Switch; Switch Windshield Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Turn Signal Switch Part Number: 56044813AA
Product Specifications
- Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Switch Multifunction
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Turn Signal Switch Part Number: 56044814AA
Product Specifications
- Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Switch Multifunction
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Turn Signal Switch Part Number: 5082025AC
Product Specifications
- Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Switch Multifunction
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Turn Signal Switch Part Number: 4685956AC
Product Specifications
- Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Switch Multifunction
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Turn Signal Switch Part Number: 56044884AA
Product Specifications
- Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Switch Multifunction
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

Chrysler Pacifica Wiper Switch

Choose OEM Wiper Switch that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Wiper Switch follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Pacifica Wiper Switch Parts and Q&A

Turn Signal Switch
56044813AA
Q: How to Maintain and Fix a Wiper Switch on Chrysler Pacifica?
A:
The first step of wiper switch servicing is to detach and isolate the battery's negative cable. Let the air bag system reserve capacitor discharge for two minutes to avoid accidental use of the air bags which might cause unintentional injury or death. Remove the upper and lower steering column shrouds from the wheel as the next step. Cut the wire from the cluster and separate the connector for the right multi-function switch. After that, get rid of the two screws holding the right multi-function switch in place and remove the switch from the mounting housing.
Wiper Switch
5082035AA
Q: How to Service the Right Wiper Switch on Chrysler Pacifica?
A:
Before handling the right multifunction switch, disconnect the negative side of the battery and wait for two minutes for the air bag reserve capacitor to empty. Take away the upper and lower covers on the tops of the steering column, then unplug the instrument panel wire harness from the right multi-function switch. After that, unscrew the two screws holding the right multi-function switch to the multi-function switch mounting housing and remove the switch. To install the right multi-function switch, mount it on the mounting housing and hold it with the two screws, scarfing them to 2.5 Nm (22 in. lbs). Connect the wire harness at the instrument panel to the switch, insert the upper and lower steering column covers and secure each with 2 Nm (17 in. lbs) of torque. After that, link the battery negative cable and make sure all vehicle functions are working properly.