How to Service and Repair a Pressure Plate on Chrysler Crossfire?

The clutch cover should be serviced or repaired after removing the transmission. While loosening all the bolts, label the link between the clutch cover and the flywheel as you remove them bit by bit 1 to 1 1/2 turns. Once you've removed the bolts, remove the clutch cover. If you reuse the clutch cover, fit an old release bearing or pipe inside to depress the diaphragm, align the adjusting ring to the right mark. Set the clutch disc and cover onto the flywheel, finger-tighten the bolts holding the clutch cover and use a universal tool to align the clutch plate. Tighten the clutch cover bolts about one full rotation at a time, then when all bolts are fully in place, tighten them to 25 Nm (18 ft. lbs.). Following this, take out the clutch alignment tool and install the transmission back again.

OEM Chrysler Pressure Plate

Clutch Pressure Plate

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Pressure Plates found

View related parts
Chrysler Pressure Plate Part Number: MR553278
$298.22 MSRP: $378.04
You Save: $79.82 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Clutch; Clutch Kit; Cover Assembly Clutch
Fits the following Chrysler Models:
- Sebring | 2001-2005 | LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Pressure Plate Part Number: MR534352
Product Specifications
- Other Name: Cover - Clutch; Clutch Kit; Cover Assembly Clutch
Fits the following Chrysler Models:
- Sebring | 2004-2005 | Base | 4 Cyl 2.4 L GAS
View related parts
Chrysler Pressure Plate Part Number: 4797438AB
Product Specifications
- Other Name: Clutch; Clutch Release Bearing; Clutch Kit; Release Bearing; Disc
Fits the following Chrysler Models:
- LeBaron | 1987-1990 | Base, GT, GTC, GTS, High Line, Premium | 4 Cyl 2.5 L GAS
- New Yorker | 1987 | Base | 4 Cyl 2.5 L GAS
- Town & Country | 1990, 1987-1988 | Base | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Pressure Plate Part Number: 4797437
Product Specifications
- Other Name: Clutch - Disc & Pressure Plate; Clutch Kit
Fits the following Chrysler Models:
- E Class | 1984 | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.6 L GAS
- Executive Limousine | 1985 | Base | 4 Cyl 2.6 L GAS
- Executive Sedan | 1984 | Base | 4 Cyl 2.6 L GAS
- Laser | 1984-1986 | Base, XE | 4 Cyl 2.2 L GAS
- LeBaron | 1984-1990 | Base, GT, GTC, GTS, High Line, Mark Cross, Premium | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
- New Yorker | 1984-1988 | Base, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.6 L GAS
- Town & Country | 1990, 1984-1988 | Base, Mark Cross | 4 Cyl 2.2 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Pressure Plate Part Number: 4626633AB
Product Specifications
- Other Name: Clutch - Disc & Pressure Plate
Fits the following Chrysler Models:
- LeBaron | 1987-1990 | Base, GTC, GTS, Premium | 4 Cyl 2.2 L GAS
- New Yorker | 1987-1988 | Base, Turbo | 4 Cyl 2.2 L GAS
- Town & Country | 1987-1988 | Base | 4 Cyl 2.2 L GAS
View More
View related parts
Chrysler Pressure Plate Part Number: 4511174AB
Product Specifications
- Other Name: Clutch; Clutch Kit; Disc
Fits the following Chrysler Models:
- LeBaron | 1991-1993 | Base, GTC, LE, LX, Landau | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Pressure Plate Part Number: 4670116AB
Product Specifications
- Other Name: Clutch - Modular
Fits the following Chrysler Models:
- Sebring | 1995-1999 | JX, JXi, LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Pressure Plate Part Number: 5102783AB
Product Specifications
- Other Name: Disc - Clutch; Clutch Kit; Disc
- Replaces: 5098832AC, 5097012AA, 5102783AA
Fits the following Chrysler Models:
- Crossfire | 2004-2008 | Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

Chrysler Pressure Plate

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Pressure Plate for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Pressure Plate Parts and Q&A

Pressure Plate
5102783AB
Q: How to Service and Repair a Pressure Plate on Chrysler Crossfire?
A:
The clutch cover should be serviced or repaired after removing the transmission. While loosening all the bolts, label the link between the clutch cover and the flywheel as you remove them bit by bit 1 to 1 1/2 turns. Once you've removed the bolts, remove the clutch cover. If you reuse the clutch cover, fit an old release bearing or pipe inside to depress the diaphragm, align the adjusting ring to the right mark. Set the clutch disc and cover onto the flywheel, finger-tighten the bolts holding the clutch cover and use a universal tool to align the clutch plate. Tighten the clutch cover bolts about one full rotation at a time, then when all bolts are fully in place, tighten them to 25 Nm (18 ft. lbs.). Following this, take out the clutch alignment tool and install the transmission back again.