How to Remove an Exhaust Manifold on Chrysler PT Cruiser?

The first step is to remove the clean air hose and housing around the air cleaner before taking off the exhaust manifold. Unplug the battery's negative cable and take out the throttle and speed control cables from the throttle lever and bracket. Separately, connect the MAP sensor electrical connector and remove the bolts holding the reservoir to the cylinder head which you should now see. Start by removing the coolant recovery container, the upper heat shield bolts and finally take away the upper heat shield. Lift the car and pull out the exhaust pipe from the manifold. Disconnect the engine wiring heat shield and the manifold support bracket, then remove the lower exhaust manifold heat shield. Remove the oxygen sensor's electrical connector and take out the lower bolts that hold the exhaust manifold. Raise the car, then remove the upper exhaust manifold and its fasteners. After that, lift out the exhaust manifold from the space above or in between the engine and the cowl panel. The next step is to discard the manifold gasket.

OEM Chrysler PT Cruiser Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Exhaust Manifold found

View related parts
Chrysler PT Cruiser Exhaust Manifold Part Number: 4884460AA
Product Specifications
- Other Name: Manifold - Exhaust; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, Dream, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

Chrysler PT Cruiser Exhaust Manifold

Choose OEM Exhaust Manifold that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Exhaust Manifold follows strict manufacturing steps to lock in quality and fit. If your Chrysler PT Cruiser matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine PT Cruiser parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Exhaust Manifold of Chrysler PT Cruiser vehicles is a very vital component since it helps to channel hot exhaust gases from the engine on to the exhaust system so as to achieve optimum performance of the engine with less polluting the environment. Located at the top of the exhaust system the manifold gathers the exhaust gases of multiple cylinders and directs them through the catalytic converter and the muffler. This design also reduces the issue of intake reversion which is bad for any engines efficiency levels. The exhaust manifolds used in Chrysler PT Cruiser automobiles are normally of cast iron/stainless steel and the headers which are products improve performance by reducing flow restriction. These headers do increase the velocity of the exhaust gas hence enhanced engine efficiency. There may be certain differences in the concept, but a basic purpose remains the same and assists in fulfilling the concept of the Chrysler PT Cruiser so that it can perform efficiency and at the same time protect people from the deadly effects of exhaust fumes.

Chrysler PT Cruiser Exhaust Manifold Parts and Q&A

Exhaust Manifold
4884460AA
Q: How to Remove an Exhaust Manifold on Chrysler PT Cruiser?
A:
The first step is to remove the clean air hose and housing around the air cleaner before taking off the exhaust manifold. Unplug the battery's negative cable and take out the throttle and speed control cables from the throttle lever and bracket. Separately, connect the MAP Sensor electrical connector and remove the bolts holding the reservoir to the cylinder head which you should now see. Start by removing the coolant recovery container, the upper heat shield bolts and finally take away the upper heat shield. Lift the car and pull out the Exhaust Pipe from the manifold. Disconnect the engine wiring heat shield and the manifold support bracket, then remove the lower exhaust manifold heat shield. Remove the Oxygen Sensor's electrical connector and take out the lower bolts that hold the exhaust manifold. Raise the car, then remove the upper exhaust manifold and its fasteners. After that, lift out the exhaust manifold from the space above or in between the engine and the cowl panel. The next step is to discard the manifold gasket.