How is the MAP Sensor Installed on the Intake Manifold on Chrysler PT Cruiser?

The MAP sensor is mounted onto the intake manifold plenum. Place the sensor into the intake manifold, but be sure that the O-ring seal is not broken when you insert it. After that, set the torque of the mounting screws to 2 Nm (20 in. lbs) when tightening the plastic manifold. With the sensor secured, attach the electrical connector to the sensor now. After that, sink the negative battery cable and then add the air cleaner lid and makeup air hose.

How to Service and Repair a MAP Sensor on the Intake Manifold Plenum on Chrysler PT Cruiser?

The manifold pressure/vacuum sensor is attached to the intake manifold plenum and you start by taking off the air cleaner lid and the makeup air hose. Then, take out the negative battery cable and unplug the electrical connector from the MAP sensor. Once you are done with those, undo the mounting screws and remove the sensor from the camera.

OEM Chrysler PT Cruiser MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 MAP Sensors found

View related parts
Chrysler PT Cruiser M.A.P. Sensor Part Number: 5033224AB
$56.38 MSRP: $81.15
You Save: $24.77 (31%)
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Sensor Map
- Replaces: 5033224AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Chrysler PT Cruiser | Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser M.A.P. Sensor Part Number: 4896003AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 4896003AA, 4896002AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser M.A.P. Sensor Part Number: 4686684AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor
- Replaces: 4686684AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chrysler PT Cruiser | Base, Dream, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

Chrysler PT Cruiser MAP Sensor

Choose OEM MAP Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each MAP Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler PT Cruiser matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine PT Cruiser parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

MAP Sensor concerns the positive air pressure which enters the intake manifold in Chrysler PT Cruiser automobiles. This tiny, plastic Like a screw, it sends signals to the engine control unit allowing the ECU to change the fuel injectors so that the air volume in the cylinder is read to control the air-fuel mixture for combustion. It can also be that only naturally aspirated models of Chrysler PT Cruiser cars use MAP sensors of one type while cars with forced induction systems will have different types of MAP Sensors. Whereas naturally aspirated engines are basically controlled by the MAP Sensor only, the forced induction ones are regulated by both the MAP Sensor and the mass airflow (MAF) sensor. Realtime pressure is a necessity for fuel metering control and ignition timing among other critical operations, and therefore is an important player of the vehicle's electronic control systems.

Chrysler PT Cruiser MAP Sensor Parts and Q&A

M.A.P. Sensor
4896003AB
Q: How is the MAP Sensor Installed on the Intake Manifold on Chrysler PT Cruiser?
A:
The MAP sensor is mounted onto the intake manifold plenum. Place the sensor into the intake manifold, but be sure that the O-ring seal is not broken when you insert it. After that, set the torque of the mounting screws to 2 Nm (20 in. lbs) when tightening the plastic manifold. With the sensor secured, attach the electrical connector to the sensor now. After that, sink the negative Battery Cable and then add the air cleaner lid and makeup air hose.
M.A.P. Sensor
5033224AB
Q: How to Service and Repair a MAP Sensor on the Intake Manifold Plenum on Chrysler PT Cruiser?
A:
The manifold pressure/vacuum sensor is attached to the intake manifold plenum and you start by taking off the air cleaner lid and the makeup air hose. Then, take out the negative Battery Cable and unplug the electrical connector from the MAP sensor. Once you are done with those, undo the mounting screws and remove the sensor from the camera.