How to Remove the Exhaust Pipe from the System on Chrysler PT Cruiser?

The exhaust system must be allowed to cool down prior to removing an intermediate pipe, as it reaches very high temperatures near the catalytic converter. With the vehicle on a hoist, place penetrating oil on the band clamp fastener of the component you're removing. Do not apply petroleum-based lubricants to your muffler or exhaust pipe isolators; try a solution from washing liquid and water instead. After that, take out the muffler. Unclock the band clamp, pull off the support isolator and free the intermediate pipe from the catalytic converter pipe (2). Wipe the ends of the pipes and muffler to guarantee a successful joint and throw away worn or damaged isolators, rusted clamps, worn-out supports and attachment parts. Original equipment or similar parts should be used whenever a component in the exhaust system needs to be replaced.

How to Properly Assemble and Install an Exhaust Pipe on Chrysler PT Cruiser?

As you put together the exhaust system, tighten the clamps only when everything is aligned and all clearances are checked. Install the underbody's intermediate pipe and isolator supports and then install the muffler. Place all parts at the front, set them in alignment and tighten the band clamps to 47 Nm (35 ft. lbs.). You should not too much tension on band clamps or they will go all the way down against the center hourglass-shaped block, causing the clamp band to stretch and making it necessary to purchase a new one. Pull out the nut, open the clamp by removing its ends and break the spot weld from the previous band clamp with a grinder or file until the pipe is smooth, ready for the new clamp. Once the engine is running after installation, look for exhaust leaks and make the necessary fixes and check that no part of the exhaust touches the vehicle body and make adjustments if it does.

OEM Chrysler PT Cruiser Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Exhaust Pipes found

View related parts
Chrysler PT Cruiser Exhaust Pipe Part Number: 5278194AC
$192.03 MSRP: $291.00
You Save: $98.97 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Extension; Direct-Fit Exhaust; Exhaust System Kit; Intermed Pipe; Pipe Exhaust Extension
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, Dream, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Catalytic Converter Part Number: 5085905AC
$3227.38 MSRP: $4695.00
You Save: $1467.62 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Converter; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Catalytic Converter Part Number: 5085658AB
$3124.33 MSRP: $4565.00
You Save: $1440.67 (32%)
Product Specifications
- Other Name: Converter - Exhaust; Converter; Pipe And Converter Exhaust; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Catalytic Converter Part Number: 5085980AB
Product Specifications
- Other Name: Converter - Catalytic; Converter; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler PT Cruiser | Base, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Catalytic Converter Part Number: 5085905AA
Product Specifications
- Other Name: Converter - Catalytic; Converter; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler PT Cruiser | Base, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Exhaust Pipe Part Number: 5085910AC
Product Specifications
- Other Name: Pipe - Exhaust Extension; Exhaust Intermediate Pipe; Direct-Fit Exhaust; Exhaust System Kit; Intermed Pipe; Pipe Exhaust Extension
- Replaces: 5085910AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Muffler Part Number: 5278502AE
Product Specifications
- Other Name: Muffler - Exhaust; Resonator; Muffler Exhaust
- Replaces: 5278502AC, 5278502AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler PT Cruiser | Base, Dream, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Muffler Part Number: 5085267AF
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Resonator
- Replaces: 5085267AC, 5085267AE, 5085267AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Chrysler PT Cruiser | Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Muffler Part Number: 5290586AD
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Resonator
- Replaces: 5278853AF, 5290586AB, 5278853AG, 5290586AC, 5278853AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2008 Chrysler PT Cruiser | Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Muffler Part Number: 5278503AH
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Resonator; Muffler Exhaust
- Replaces: 5278503AF, 5278503AC, 5278503AD, 5278503AG, 5278503AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, Dream, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Muffler Part Number: 5278195AG
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Resonator; Muffler And Tailpipe Exhaust; Muffler Exhaust
- Replaces: 5278195AD, 5278195AC, 5278195AF, 5278195AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, Dream, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Catalytic Converter Part Number: 5278850AG
Product Specifications
- Other Name: Converter - Catalytic; Converter; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler PT Cruiser | Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Catalytic Converter Part Number: 5085980AD
Product Specifications
- Other Name: Converter - Exhaust; Converter; Pipe And Converter Exhaust; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Catalytic Converter Part Number: 5278850AE
Product Specifications
- Other Name: Converter - Catalytic; Converter; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chrysler PT Cruiser | GT, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Catalytic Converter Part Number: 5085700AB
Product Specifications
- Other Name: Converter - Catalytic; Converter; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chrysler PT Cruiser | Base, GT, Limited, Touring | 4 Cyl 2.4 L GAS

Chrysler PT Cruiser Exhaust Pipe

Choose OEM Exhaust Pipe that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Exhaust Pipe follows strict manufacturing steps to lock in quality and fit. If your Chrysler PT Cruiser matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine PT Cruiser parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The specifically, the Exhaust Pipe of the Chrysler PT Cruiser is one of the components which clarify why this vehicle is known for its high quality and outstanding performance. An exhaust pipe plays a crucial role for the gases produced during the operation of an engine; it provides passage for exhaust gases straight to the atmosphere and combines other parts of the exhaust system like the manifold, catalytic converter, and muffler. Such a design also controls the production of noxious emissions and at the same time attenuates the level of noise pollution, which will make the driving experience more enjoyable. They can run in conjunction with all these models to make each exhaust pipe configuration, whether an application for headers on the in-line engines or Y-pipes on the V-type engines, much suitable for use in the Chrysler PT Cruiser. Of course, that relates to the mandrel-bent pipes which ensure free flow and crossover pipes such as H-pipes or X-pipes to unlock the exhaust flow between banks of cylinders. This component can easily get rusty and physically damaged, and therefore needs timely overhaul as any problem exhibited by the exhaust pipe is extremely unhealthy for the vehicles' performance and safety. As soon as Chrysler PT Cruiser hit the market, with its striking combination of classic car design and modern utility, it received rave reviews and the car's exhaust pipe became a rather prominent element in its function. Being one of the market leaders for over a million units, Chrysler PT Cruiser is an example of the automotive industry innovativeness, and the exhaust pipe is a crucial part to keep cruisers performing efficiently and safely.

Chrysler PT Cruiser Exhaust Pipe Parts and Q&A

Catalytic Converter
5085905AC
Q: How to Remove the Exhaust Pipe from the System on Chrysler PT Cruiser?
A:
The exhaust system must be allowed to cool down prior to removing an intermediate pipe, as it reaches very high temperatures near the Catalytic Converter. With the vehicle on a hoist, place penetrating oil on the band clamp fastener of the component you're removing. Do not apply petroleum-based lubricants to your Muffler or exhaust pipe isolators; try a solution from washing liquid and water instead. After that, take out the muffler. Unclock the band clamp, pull off the support isolator and free the intermediate pipe from the catalytic converter pipe (2). Wipe the ends of the pipes and muffler to guarantee a successful joint and throw away worn or damaged isolators, rusted clamps, worn-out supports and attachment parts. Original equipment or similar parts should be used whenever a component in the exhaust system needs to be replaced.
Exhaust Pipe
5278194AC
Q: How to Properly Assemble and Install an Exhaust Pipe on Chrysler PT Cruiser?
A:
As you put together the exhaust system, tighten the clamps only when everything is aligned and all clearances are checked. Install the underbody's intermediate pipe and isolator supports and then install the Muffler. Place all parts at the front, set them in alignment and tighten the band clamps to 47 Nm (35 ft. lbs.). You should not too much tension on band clamps or they will go all the way down against the center hourglass-shaped block, causing the clamp band to stretch and making it necessary to purchase a new one. Pull out the nut, open the clamp by removing its ends and break the spot weld from the previous band clamp with a grinder or file until the pipe is smooth, ready for the new clamp. Once the engine is running after installation, look for exhaust leaks and make the necessary fixes and check that no part of the exhaust touches the vehicle body and make adjustments if it does.