How to Service and Repair a Lash Adjuster with Camshafts Installed on Chrysler Sebring?

When performing service or repair of the lifter or lash adjuster in-vehicle with camshafts installed, start by taking out the cylinder head cover, the rocker arm and then the hydraulic lash adjuster. Do the same for every hydraulic lash adjuster, remembering to mark them so they're assembled in the same position later since, on a bike, lash adjusters are removed and replaced as one unit. For assembly, you should ensure every hydraulic lash adjuster has some engine oil; no or minimal plunger travel as the lifter goes down will tell you the oil is enough. Then, install each hydraulic lash adjuster and the rocker arm and repeat for all hydraulic lash adjusters before fitting the cylinder head cover.

How to Properly Remove and Replace a Lash Adjuster on Chrysler Sebring?

Remember that original lash adjusters go back to their original places to help protect the engine, while new ones can go anywhere you choose. It is helpful to put a light layer of clean engine oil on each camshaft lash adjuster just before installing them into the cylinder head. When the lash adjusters are in, go ahead and attach the camshafts. Whenever new lash adjusters are being put in, check and adjust the valve lash. As the last step, fit the cylinder head cover onto the block.

OEM Chrysler Sebring Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Lash Adjusters found

View related parts
Chrysler Sebring Valve Lifters Part Number: MD377560
$16.92 MSRP: $26.55
You Save: $9.63 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Lash Adjuster; Valve Lash Adjuster; Adjuster; Adjuster Valve Lash
- Replaces: MD377561
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chrysler Sebring | 2.4L L4
- 1995-2000 Chrysler Sebring
View related parts
Chrysler Sebring Valve Lifters Part Number: 4884594AB
$4.45 MSRP: $6.70
You Save: $2.25 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve; Valve Lifter; Tappet; Tappet Valve Solid Bucket Tappets Thickness Is Stamped On Inside Of Bucket.; Tappet Valve See Note
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Valve Lifters Part Number: 4777976AA
$29.19 MSRP: $37.90
You Save: $8.71 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Valve Lifter; Adjuster Valve Lash
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006, 1995-1999 Chrysler Sebring | Base, JX, JXi, LX | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Valve Lifters Part Number: 4663985
$37.74 MSRP: $56.00
You Save: $18.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Engine Valve Lifter; Valve Lifter; Adjuster Valve Lash
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

Chrysler Sebring Lash Adjuster

Choose OEM Lash Adjuster that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Lash Adjuster follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Sebring Lash Adjuster Parts and Q&A

Valve Lifters
4777976AA
Q: How to Service and Repair a Lash Adjuster with Camshafts Installed on Chrysler Sebring?
A:
When performing service or repair of the lifter or lash adjuster in-vehicle with Camshafts installed, start by taking out the cylinder head cover, the Rocker Arm and then the hydraulic lash adjuster. Do the same for every hydraulic lash adjuster, remembering to mark them so they're assembled in the same position later since, on a bike, lash adjusters are removed and replaced as one unit. For assembly, you should ensure every hydraulic lash adjuster has some engine oil; no or minimal plunger travel as the lifter goes down will tell you the oil is enough. Then, install each hydraulic lash adjuster and the rocker arm and repeat for all hydraulic lash adjusters before fitting the cylinder head cover.
Valve Lifters
4884594AB
Q: How to Properly Remove and Replace a Lash Adjuster on Chrysler Sebring?
A:
Remember that original lash adjusters go back to their original places to help protect the engine, while new ones can go anywhere you choose. It is helpful to put a light layer of clean engine oil on each Camshaft lash adjuster just before installing them into the cylinder head. When the lash adjusters are in, go ahead and attach the camshafts. Whenever new lash adjusters are being put in, check and adjust the valve lash. As the last step, fit the cylinder head cover onto the block.