How to Safely Service a Seat Heater Switch on Chrysler Sebring?

When working on a seat heater switch on a car with air bags, start by disconnecting and isolating the negative battery cable which will let the air bag system capacitor discharge after two minutes. We have to lock the steering wheel to avoid the air bag going off accidentally which can cause injury or death. Part of the heated seat switches is built into the Accessory Switch Bank Module (ASBM) and First, cut off the car battery's negative terminal cable and pull out the central bezel of the instrument panel. After that, remove all four screws holding the ASBM onto the back of the instrument panel center bezel and remove the ASBM.

How to Maintain a Seat Heater Switch on Chrysler Sebring?

To maintain the seat heater switch, first turn off the negative battery cable. After that, remove the center console and unplug the wire harness connector from the connector receptacle on the back of the heated seat switch. Press down the retaining tabs and then pull the heated seat switch right out of the console. When setting up the switch, place the driver's side switch on the left and that for the passenger on the right. Link the center console wire harness to the back connector on the heated seat switch, see if the switch/system turns on and finally put in the center console. After that, connect the heated seat switch where the center console mounting hole is and connect the battery negative cable once again.

OEM Chrysler Sebring Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Seat Heater Switches found

View related parts
Chrysler Sebring Switch Part Number: 1EF571DVAA
$6.58 MSRP: $19.75
You Save: $13.17 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated/Cooled; Switch Heated/Cooled Cup Holder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Switch Part Number: 1EF562DVAA
$6.58 MSRP: $25.20
You Save: $18.62 (74%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated/Cooled; Switch Heated/Cooled Cup Holder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Chrysler Sebring | LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Switch Part Number: 4608673AC
$33.53 MSRP: $154.00
You Save: $120.47 (79%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Switch Heated Seat
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chrysler Sebring | Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Switch Part Number: 1EF571D1AA
$6.58 MSRP: $8.34
You Save: $1.76 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated/Cooled; Switch Heated/Cooled Cup Holder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Switch, Slate Gray Part Number: 1EF571DBAA
Product Specifications
- Other Name: Switch - Heated/Cooled; Switch Heated/Cooled Cup Holder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Switch Part Number: 1EF571T1AA
Product Specifications
- Other Name: Switch - Heated/Cooled; Switch Heated/Cooled Cup Holder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Switch Part Number: 1EF561DVAA
Product Specifications
- Other Name: Switch - Heated/Cooled; Switch Heated/Cooled Cup Holder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Chrysler Sebring Seat Heater Switch

Choose OEM Seat Heater Switch that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Seat Heater Switch follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Sebring Seat Heater Switch Parts and Q&A

Switch
1EF571D1AA
Q:
How to Safely Service a Seat Heater Switch on Chrysler Sebring?
A:
When working on a seat heater switch on a car with air bags, start by disconnecting and isolating the negative Battery Cable which will let the air bag system capacitor discharge after two minutes. We have to lock the steering wheel to avoid the air bag going off accidentally which can cause injury or death. Part of the heated seat switches is built into the Accessory Switch Bank Module (ASBM) and First, cut off the car battery's negative terminal cable and pull out the central bezel of the instrument panel. After that, remove all four screws holding the ASBM onto the back of the instrument panel center bezel and remove the ASBM.
Switch
4608673AC
Q:
How to Maintain a Seat Heater Switch on Chrysler Sebring?
A:
To maintain the seat heater switch, first turn off the negative Battery Cable. After that, remove the Center Console and unplug the wire harness connector from the connector receptacle on the back of the heated seat switch. Press down the retaining tabs and then pull the heated seat switch right out of the console. When setting up the switch, place the driver's side switch on the left and that for the passenger on the right. Link the center console wire harness to the back connector on the heated seat switch, see if the switch/system turns on and finally put in the center console. After that, connect the heated seat switch where the center console mounting hole is and connect the battery negative cable once again.