How to Properly Install and Service an A/C Expansion Valve on Chrysler Town & Country?

Before you install the A/C expansion valve, first get rid of the tape or plugs from the opened refrigerant line fittings and the evaporator and expansion valve ports. After cleaning the oil from new seals, apply it again with clean refrigerant oil and install them in the evaporator tube fittings, always selecting those made from the suggested special material for the R-134a system. Following this, join the A/C expansion valve (2) to the A/C evaporator and make firm by bolting it into place with two bolts (1), setting the torque to 11 Nm (97 in. lbs.). Use clean refrigerant oil to lubricate new washer seals and then set them onto the ends of the refrigerant line fittings, using only what the guidelines recommend. Before inserting the tube ends, make sure they match up with the valve to keep both from being damaged. Link the A/C suction line (1) with the A/C liquid line (4) to the A/C expansion valve (2) and fit nut (3) over them, tightening it to 20 Nm (15 ft. lbs.). Following installation, drain the refrigerant system, set the refrigerant oil level and add or remove refrigerant as needed.

How to Safely Remove and Service an A/C Expansion Valve on Chrysler Town & Country?

First, get rid of the refrigerant from your refrigerant system to service or repair the expansion valve. Then, eliminate the nut that joins the A/C suction line, the A/C liquid line and the A/C expansion valve. Unplug the suction and liquid tubes from the A/C expansion valve. Throw out the washer seals after this. After that, take out the two bolts that hold the A/C expansion valve to the evaporator coil. Then, remove the A/C expansion valve from the A/C evaporator and toss aside the O-ring seals. Also, install plugs or cover the ends of the opened refrigerant lines in the evaporator and expansion valve with tape.

OEM Chrysler Town & Country A/C Expansion Valve

Air Conditioning Expansion Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 A/C Expansion Valves found

View related parts
Chrysler Town & Country Expansion Valve, Front Part Number: 5136101AB
$147.27 MSRP: $285.00
You Save: $137.73 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Expansion; A/C Expansion Valve, Front; Valve Kit A/C Expansion; Valve Kit Expansion; A/C Expansion Valve
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler Town & Country | Base, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Expansion Valve, Rear Part Number: 68057718AA
$151.61 MSRP: $229.00
You Save: $77.39 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Expansion; A/C Expansion Valve, Rear; Valve Kit A/C Expansion; A/C Expansion Valve
- Position: Rear
- Replaces: 68031978AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chrysler Town & Country | LX, Limited, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Expansion Valve, Rear Part Number: 68164490AB
$110.54 MSRP: $231.00
You Save: $120.46 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Expansion; A/C Expansion Valve, Rear; A/C Expansion Valve
- Position: Rear
- Replaces: 68164490AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.6L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Expansion Valve, Front Part Number: 68029727AA
$66.84 MSRP: $99.95
You Save: $33.11 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Expansion; A/C Expansion Valve, Front; Valve A/C Expansion; A/C Expansion Valve
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Expansion Valve, Rear Part Number: 68261533AA
$68.09 MSRP: $101.00
You Save: $32.91 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Expansion; A/C Expansion Valve, Rear; Valve A/C Expansion; A/C Expansion Valve
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chrysler Town & Country | LX, Limited, Limited Platinum, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Expansion Valve Part Number: 4798682
$127.32 MSRP: $166.47
You Save: $39.15 (24%)
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Expansion; A/C Expansion Valve; Valve Assembly, A/C Expansion, Rear Unit, W/O - Rings; Valve, Auxiliary Unit Expansion, W/O - Rings; Valve A/C Expansion
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Town & Country | Base, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Expansion Valve, Front Part Number: 5019218AE
$209.09 MSRP: $274.00
You Save: $64.91 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Expansion; A/C Expansion Valve, Front; Valve Kit Expansion; A/C Expansion Valve
- Position: Front
- Replaces: 5019218AC, 5019218AB, 5019218AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Expansion Valve Part Number: 4796464
$12.74 MSRP: $16.15
You Save: $3.41 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - H Type; A/C Expansion Valve; Discharge Hose; Receiver-Dehydrator; Valve, A/C Expansion (H - Type) W/Low Pressure Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1992 Chrysler Town & Country | Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Expansion Valve, Front Part Number: 55036079AF
Product Specifications
- Other Name: Valve - A/C Expansion; Front A/C Expansion Valve; Compressor Cut-Out Switch; HVAC Pressure & Trinary Switches.; Lower Pressure Cut-Off Switch; Valve A/C Expansion; A/C Expansion Valve
- Position: Front
- Replaces: 55036079AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990, 1984-1988 Chrysler Town & Country | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Expansion Valve, Rear Part Number: 5019186AB
Product Specifications
- Other Name: Valve - Expansion; A/C Expansion Valve, Rear; Valve Kit Expansion; A/C Expansion Valve
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Expansion Valve Part Number: 4176999
Product Specifications
- Other Name: Valve - Lpco & Export; A/C Expansion Valve; Valve, A/C, Expansion Switch (High - Valve) Low Pressure; various A/C expansion valves.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1986 Chrysler Town & Country | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS
View related parts
Chrysler Town & Country Expansion Valve, Rear Part Number: 5189088AA
Product Specifications
- Other Name: Expansion; A/C Expansion Valve, Rear; Valve Kit Expansion Includes: Valve To Evaporator O - Rings; Valve Kit Expansion; A/C Expansion Valve
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler Town & Country | Base, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Expansion Valve Part Number: 4882342AB
Product Specifications
- Other Name: Valve - A/C Expansion; A/C Expansion Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler Town & Country | LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country A/C Expansion Valve

Choose OEM A/C Expansion Valve that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each A/C Expansion Valve follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Specifically, the A/C Expansion Valve is responsible for controlling the flow of refrigerant in Chrysler Town & Country automobiles in order to provide the optimal efficiency. This component controls the flow of refrigerant for purposes of enhancing the cooling processes of the A/C hence enhances the functionality of the A/C system. Years of development of Chrysler Town & Country proved that the manufacturer uses different types of A/C Expansion Valves on its vehicles to improve the performance of the system. While specific differences between these styles may not be detailed, the primary function remains consistent: which must be utilized in order to manage the flow of refrigerant as efficiently as possible. A/C Expansion Valve plays a critical role in the vehicle climate control system of Chrysler Town & Country to regulate temperature for passengers' comfort, hence it is critical for the vehicle.

Chrysler Town & Country A/C Expansion Valve Parts and Q&A

Expansion Valve, Front
68029727AA
Q: How to Properly Install and Service an A/C Expansion Valve on Chrysler Town & Country?
A:
Before you install the A/C expansion valve, first get rid of the tape or plugs from the opened refrigerant line fittings and the Evaporator and expansion valve ports. After cleaning the oil from new seals, apply it again with clean refrigerant oil and install them in the evaporator tube fittings, always selecting those made from the suggested special material for the R-134a system. Following this, join the A/C expansion valve (2) to the A/C evaporator and make firm by bolting it into place with two bolts (1), setting the torque to 11 Nm (97 in. lbs.). Use clean refrigerant oil to lubricate new washer seals and then set them onto the ends of the refrigerant line fittings, using only what the guidelines recommend. Before inserting the tube ends, make sure they match up with the valve to keep both from being damaged. Link the A/C suction line (1) with the A/C liquid line (4) to the A/C expansion valve (2) and fit nut (3) over them, tightening it to 20 Nm (15 ft. lbs.). Following installation, drain the refrigerant system, set the refrigerant oil level and add or remove refrigerant as needed.
Expansion Valve, Rear
68164490AB
Q: How to Safely Remove and Service an A/C Expansion Valve on Chrysler Town & Country?
A:
First, get rid of the refrigerant from your refrigerant system to service or repair the expansion valve. Then, eliminate the nut that joins the A/C suction line, the A/C liquid line and the A/C expansion valve. Unplug the suction and liquid tubes from the A/C expansion valve. Throw out the washer seals after this. After that, take out the two bolts that hold the A/C expansion valve to the Evaporator coil. Then, remove the A/C expansion valve from the A/C evaporator and toss aside the O-ring seals. Also, install plugs or cover the ends of the opened refrigerant lines in the evaporator and expansion valve with tape.