How to Install a Rear Heater Core on Chrysler Town & Country?

Don't disturb, loosen or move the heater core tubes when installing the rear heater core to prevent coolant leaks and personal injuries. Make sure the heater core fits into its housing, checking that the foam seals are properly set and the two retaining tabs are fully pushed in. Attach the heater core tube bracket to the rear HVAC housing by using a screw and turn it until you reach 2 Nm (17 in. lbs.). Following that, place the rear HVAC housing and then link the negative battery cable back together. If you are installing a new rear heater core, flush the whole cooling system, fill the engine cooling system back up, clear out the refrigerant system and add fresh refrigerant.

How to Safely Remove a Heater Core on Chrysler Town & Country?

Get the air bag system out of the way by separating the black cable from the battery, then let the system clear its storage for two minutes. Make sure you follow all the safety rules to avoid your air bag going off by accident and putting you in harm's way. Heater core tubes are serviced as a whole and should not be adjusted, moved or removed to prevent coolant leaks. First, take off the housing from the HVAC system and put it on a workbench. After that, take off the A/C expansion valve. A deformed or damaged foam seal at the front of the HVAC housing should be replaced. Lift up the pressure brown foam seal at the front of the cabinet. After that, remove the two screws that fix the heater core cover to the driver side of the air distribution housing. Turn and tilt the heater core cover where necessary to free the retaining tab so you can take out the cover. A damaged or deformed foam seal on the heater core has to be replaced as well. Pull the heater core out slowly from the driver side of the air distribution housing.

OEM Chrysler Town & Country Heater Core

HVAC Heater Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Heater Cores found

View related parts
Chrysler Town & Country Heater Core Part Number: 3847943
$193.80 MSRP: $245.68
You Save: $51.88 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core Assembly Heater; HVAC Heater Core; Core; Seal, A/C Heater Core (1988)
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chrysler Town & Country | Base, Mark Cross | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS
View related parts
Chrysler Town & Country Heater Core Part Number: 4886528AC
$52.60 MSRP: $151.00
You Save: $98.40 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core - Heater; Evaporator Core; Core
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chrysler Town & Country | LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Heater Core, Rear Part Number: 5183148AC
$172.25 MSRP: $303.00
You Save: $130.75 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core - Heater; HVAC Heater Core, Rear; Core Heater; HVAC Heater Core
- Position: Rear
- Replaces: 5183148AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chrysler Town & Country | Base, LX, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Heater Core, Front Part Number: 5019219AD
$236.91 MSRP: $396.00
You Save: $159.09 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core - Heater; HVAC Heater Core, Front; Core Heater With Seal; Core Heater; HVAC Heater Core
- Position: Front
- Replaces: 5019219AC, 5019219AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Heater Core, Rear Part Number: 68049407AA
$365.76 MSRP: $555.00
You Save: $189.24 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core - Heater; HVAC Heater Core, Rear; Core Heater; HVAC Heater Core
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Heater Core, Rear Part Number: 68268021AA
$134.92 MSRP: $204.00
You Save: $69.08 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core - Heater; HVAC Heater Core, Rear; Core Heater; HVAC Heater Core
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chrysler Town & Country | LX, Limited, Limited Platinum, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Heater Core, Front Part Number: 68059166AA
$208.47 MSRP: $307.00
You Save: $98.53 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core - Heater; HVAC Heater Core, Front; Core Heater; HVAC Heater Core
- Position: Front
- Replaces: 68029728AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Heater Core, Front Part Number: 5166533AC
$226.20 MSRP: $542.00
You Save: $315.80 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core - Heater; HVAC Heater Core, Front; Core Heater; HVAC Heater Core
- Position: Front
- Replaces: 5166533AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler Town & Country | Base, LX, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Heater Core, Rear Part Number: 5019184AA
Product Specifications
- Other Name: Core - Heater; HVAC Heater Core, Rear; Core Heater; HVAC Heater Core
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Heater Core Part Number: 4798717
Product Specifications
- Other Name: Core; HVAC Heater Core; Heater Core, Auxiliary Unit; Core Heater
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Town & Country | Base, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Heater Core Part Number: 4644393
Product Specifications
- Other Name: Core; Core, Heater, W/Seals; Core, Heater; Core, A/C.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Heater Core Part Number: 4462223
Product Specifications
- Other Name: Core Heater; HVAC Heater Core; Wiring, Auxiliary A/C, Heater; Core, Seal, and Assembly for Auxiliary Heater and A/C.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1995 Chrysler Town & Country | Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Heater Core Part Number: 3848300
Product Specifications
- Other Name: Core Assembly Heater; HVAC Heater Core; A/C Evaporator; Front Evaporator Core; Core; Core, Heater; Heater, Core; Core, A/C.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1992 Chrysler Town & Country | Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

Chrysler Town & Country Heater Core

Choose OEM Heater Core that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Heater Core follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Heater Core is very important component in Chrysler Town & Country Vehicles, especially in cold weather regions, because it is directly associated with the heater blower which supplies hot air inside the vehicle's cabin when the heater is turned on. Used in the manner similar to the radiator is the Heater Core that gets the hot coolant from the engine and circulates it through the Heater Core while a fan blows the air through the surface of the Heater Core to warm the inside of the vehicle. The Heater Core is fabricated from Aluminum or brass and it has fins, which increases heat transfer rate. Due to the various modifications of the Chrysler Town & Country models present over the years, Heater Core might vary aspect regarding its features like valves and doors to regulate the temperature of the vehicle's coolant. Whereas, in the higher models, electromagnetic actuators are used for accurate adjustments of temperature shocks and some models are available with dual zone climate control for luxury mode. Some of the frequent problems associated with the Heater Core include blockage, which may make repair work challenging because one is forced to disassemble the dashboard, leakage and corrosion.

Chrysler Town & Country Heater Core Parts and Q&A

Heater Core, Rear
5183148AC
Q: How to Install a Rear Heater Core on Chrysler Town & Country?
A:
Don't disturb, loosen or move the heater core tubes when installing the rear heater core to prevent coolant leaks and personal injuries. Make sure the heater core fits into its housing, checking that the foam seals are properly set and the two retaining tabs are fully pushed in. Attach the heater core tube bracket to the rear HVAC housing by using a screw and turn it until you reach 2 Nm (17 in. lbs.). Following that, place the rear HVAC housing and then link the negative battery cable back together. If you are installing a new rear heater core, flush the whole cooling system, fill the engine cooling system back up, clear out the refrigerant system and add fresh refrigerant.
Heater Core, Front
68059166AA
Q: How to Safely Remove a Heater Core on Chrysler Town & Country?
A:
Get the air bag system out of the way by separating the black cable from the battery, then let the system clear its storage for two minutes. Make sure you follow all the safety rules to avoid your air bag going off by accident and putting you in harm's way. Heater core tubes are serviced as a whole and should not be adjusted, moved or removed to prevent coolant leaks. First, take off the housing from the HVAC system and put it on a workbench. After that, take off the A/C Expansion Valve. A deformed or damaged foam seal at the front of the HVAC housing should be replaced. Lift up the pressure brown foam seal at the front of the cabinet. After that, remove the two screws that fix the heater core cover to the driver side of the air distribution housing. Turn and tilt the heater core cover where necessary to free the retaining tab so you can take out the cover. A damaged or deformed foam seal on the heater core has to be replaced as well. Pull the heater core out slowly from the driver side of the air distribution housing.