How to Service a Coolant Temperature Sensor on Chrysler Town & Country?

You should always drain the coolant system below the ECT Sensor beforehand, in order to avoid getting hurt by the pressurized hot fluid. Following this, get rid of the power steering reservoir without taking off the hoses, then the ignition coil and bracket. Take off the coolant sensor after you have detached the electrical connector attached to it. The first step in installation is to install the new engine coolant temperature sensor using a torque of 7 Nm (60 inch lbs.). With everything now disconnected, reattach the coil bracket, the ignition coil and then reconnect the sensor's electrical connector. Once this is done, put the power steering reservoir back and fill the cooling system.

How to Install a Coolant Temperature Sensor for a 3.3/3.8L Engine on Chrysler Town & Country?

For installation of the engine coolant temperature sensor on a 3.3/3.8L engine, first put it in place and tighten it to a value of 7 Nm (60 in. lbs.). After that, attach the electrical connector to the sensor. Lastly, put in the coolant needed for the cooling system.

OEM Chrysler Town & Country Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Coolant Temperature Sensors found

View related parts
Chrysler Town & Country Coolant Temperature Sensor Part Number: 56027873
$90.13 MSRP: $125.00
You Save: $34.87 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Cooling Fan Temperature Switch; Temperature Sensor; Fan Switch; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chrysler Town & Country | LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Coolant Temperature Sensor Part Number: 5149077AB
$47.04 MSRP: $67.90
You Save: $20.86 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Fluid Temperature; Engine Coolant Temperature Sensor; Engine Oil Temperature Sensor; Temperature Sensor; Oil Pressure Sending Unit; Throttle Sensor; Oil Temperature Sending Unit.
- Replaces: 5149096AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Coolant Temperature Sensor Part Number: 56004815
$36.88 MSRP: $54.20
You Save: $17.32 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Temperature Sending Unit; Engine Temperature Switch with Warning Lamp, Diesel compatible.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chrysler Town & Country | Base, LX, LXi, SX | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Coolant Temperature Sensor Part Number: 33004281
$42.24 MSRP: $62.00
You Save: $19.76 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Cooling Fan Temperature Switch; Fan Switch; Coolant Temperature Sensor; Engine Coolant Temperature; 1994-95.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1995 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Fluid Temperature Sensor Part Number: 68164627AA
$29.25 MSRP: $43.55
You Save: $14.30 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Fluid Temperature, Sensor; Temperature Sensor; Cylinder Head, Oil, and Coolant Temperature Sensors.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Coolant Temperature Sensor Part Number: 5269870AB
$63.79 MSRP: $86.70
You Save: $22.91 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Sender Unit, Coolant Temperature; Temperature Sensor; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2009 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Fan Switch Part Number: 5226356
$4.89 MSRP: $6.20
You Save: $1.31 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Coolant Duel Thermostat; Engine Coolant Temperature Sensor; Coolant Temperature Sensor; Sensor, Coolant Dual Thermostat 3-Terminal; Electric Spark Advance Control; Engine Temp Switch; Oil Pressure Fitting.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990, 1988 Chrysler Town & Country | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Coolant Temperature Sensor Part Number: 5226374
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Sensor; Cooling Fan Switch; Intake Air Temperature Sensor; Temperature Sensor; Fan Switch; Coolant & Engine Temperature Sensors; Sending Unit.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1991, 1987-1988 Chrysler Town & Country | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Temperature Sending Unit Part Number: 4221819
Product Specifications
- Other Name: Switch Engine Temperature; Switch, Engine Temperature W/Light; Sending Unit, Engine Temperature 2.2 W/Gauge
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1991, 1985-1988 Chrysler Town & Country | Base, Mark Cross | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Temperature Sending Unit Part Number: 4504203
Product Specifications
- Other Name: Sensor - Temperature Sending Unit; Sending Unit, Temperature W/Gauge; Engine Temperature 2.2; Sensor, Coolant (Use Insulator 4414901).
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1995, 1985-1988 Chrysler Town & Country | Base, Mark Cross | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country Coolant Temperature Sensor

Choose OEM Coolant Temperature Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Coolant Temperature Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Coolant Temperature Sensor in Chrysler Town & Country is indispensable for the reasonable control of the coolant temperature to adjust the running state of the engine. This sensor is one of the fundamental ones, which deliver the information that operates the engine functions and its efficiency. Different types of Coolant Temperature Sensors have been used in Town & Country models of automobile over years with the common aim of measuring the temperature of the coolant but may vary in its design or technology. These may alter sensitivity or response time which may in turn determine how well they relay temperature fluctuations to the Engine Control Unit. All in all, the Coolant Temperature Sensor plays a crucial part in sustaining the well-being and efficiency of Chrysler Town & Country vehicles.

Chrysler Town & Country Coolant Temperature Sensor Parts and Q&A

Coolant Temperature Sensor
5269870AB
Q: How to Service a Coolant Temperature Sensor on Chrysler Town & Country?
A:
You should always drain the coolant system below the ECT Sensor beforehand, in order to avoid getting hurt by the pressurized hot fluid. Following this, get rid of the Power Steering Reservoir without taking off the hoses, then the Ignition Coil and bracket. Take off the coolant sensor after you have detached the electrical connector attached to it. The first step in installation is to install the new engine coolant temperature sensor using a torque of 7 Nm (60 inch lbs.). With everything now disconnected, reattach the coil bracket, the ignition coil and then reconnect the sensor's electrical connector. Once this is done, put the power steering reservoir back and fill the cooling system.
Coolant Temperature Sensor
5149077AB
Q: How to Install a Coolant Temperature Sensor for a 3.3/3.8L Engine on Chrysler Town & Country?
A:
For installation of the engine coolant temperature sensor on a 3.3/3.8L engine, first put it in place and tighten it to a value of 7 Nm (60 in. lbs.). After that, attach the electrical connector to the sensor. Lastly, put in the coolant needed for the cooling system.