How to Remove a Rocker Arm on Chrysler Town & Country?

You must remove the cylinder head cover(s) before pulling out the valve rocker arm. The rocker arm shaft bolts are actually captured by the shaft itself. Then, rotate each rocker shaft bolt (2) a full turn until it becomes loose which will take away all pressure from the valve spring. Then, take out the rocker arms and shaft assembly (1). The disassembly instructions explain how to take apart a rocker arm.

What is the Correct Method for Installing a Rocker Arm and Shaft on Chrysler Town & Country?

Before you put the rocker arms and shaft in place, check that the retaining bolt on the longer shaft is correctly in position. Put the rocker arm and shaft units on the pedestal mounts, being careful that all pushrods are matching up with the lifter and the rocker arm socket. Make sure each rocker arm socket meets up with the tip of its particular pushrod. Be sure to tighten the rocker arm shaft gradually, starting with the center bolts and wait 20 minutes for lifter bleed down after installing the shafts before using the engine. Firmly tighten the rocker shaft bolts in a balanced order until the shaft is seated, so that each reaches 23 Nm (200 in. lbs). Last, put on the cylinder head cover(s).

OEM Chrysler Town & Country Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Rocker Arms found

View related parts
Chrysler Town & Country Exhaust Rocker Arms Part Number: 4663996
$73.76 MSRP: $113.00
You Save: $39.24 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm; Rocker Arm Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, Touring, Touring Plus | 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Rocker Arms Part Number: 4781183AA
$90.41 MSRP: $134.00
You Save: $43.59 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Rocker Arm Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Rocker Arms Part Number: 4781182AA
$110.86 MSRP: $165.00
You Save: $54.14 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm; Rocker Arm Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Intake Rocker Arm Part Number: 4573460
$44.50 MSRP: $90.25
You Save: $45.75 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Exhaust Rocker Arms; Arm Assembly, Right Intake Rocker; Rocker Arm Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, Touring, Touring Plus | 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Intake Rocker Arm Part Number: 4573459
$44.50 MSRP: $90.25
You Save: $45.75 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Exhaust Rocker Arms; Arm Assembly, Left Intake Rocker; Rocker Arm Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, Touring, Touring Plus | 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Rocker Arms Part Number: 5184296AH
$16.24 MSRP: $23.45
You Save: $7.21 (31%)
ADD TO CART
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Valve
- Replaces: 5184296AG, 5184296AD, 5184296AE, 5184296AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Rocker Arms Part Number: 4483725
$5.59 MSRP: $7.08
You Save: $1.49 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve; Rocker Arm; Rocker Arm Valve; Rocker, Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-2000 Chrysler Town & Country | Base, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Rocker Arms Part Number: MD195450
Product Specifications
- Other Name: Rocker Arm Inlet & Exhaust; Rocker Arm, Inlet And Exhaust Valve; Arm, Rocker (B) Intake And Exhaust; Rocker Arm
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990 Chrysler Town & Country | Base | 6 Cyl 3.0 L GAS

Chrysler Town & Country Rocker Arm

Choose OEM Rocker Arm that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Rocker Arm follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Rocker Arm in Chrysler Town & Country vehicles has a great importance in the valvetrain system of the car's engine as it helps to transfer movement started from the pushrod to the specific directions of the intake/exhaust valves. Usually made from stamped steel or aluminum, The Rocker Arm has the capability of translating vertical pushrod movement into the right amount of force needed to open the valves. High-revving engines require light weight and good thermal conductivity, hence, the use of aluminum while cast iron or forged carbon steel gives improved strength in diesels. Chrysler Town & Country models may incorporate roller rockers which employ bearing to minimize the contact of components enhancing their efficiency as compared to their leaf counterparts. The rocker ratio has increased from 1.44:1- 1.71:1 in modern engines and can bring in more camshaft lift thus improving performance. The upgraded fulcrum bearings are also employed in high-RPM engines in order to cope with the load and enhance the performance and recyclability of the Rocker Arm in Chrysler Town & Country automobiles.

Chrysler Town & Country Rocker Arm Parts and Q&A

Exhaust Rocker Arms
4663996
Q: How to Remove a Rocker Arm on Chrysler Town & Country?
A:
You must remove the cylinder head cover(s) before pulling out the valve rocker arm. The rocker arm shaft bolts are actually captured by the shaft itself. Then, rotate each rocker shaft bolt (2) a full turn until it becomes loose which will take away all pressure from the valve spring. Then, take out the rocker arms and shaft assembly (1). The disassembly instructions explain how to take apart a rocker arm.
Rocker Arms
4781182AA
Q: What is the Correct Method for Installing a Rocker Arm and Shaft on Chrysler Town & Country?
A:
Before you put the rocker arms and shaft in place, check that the retaining bolt on the longer shaft is correctly in position. Put the rocker arm and shaft units on the pedestal mounts, being careful that all pushrods are matching up with the lifter and the rocker arm socket. Make sure each rocker arm socket meets up with the tip of its particular pushrod. Be sure to tighten the rocker arm shaft gradually, starting with the center bolts and wait 20 minutes for lifter bleed down after installing the shafts before using the engine. Firmly tighten the rocker shaft bolts in a balanced order until the shaft is seated, so that each reaches 23 Nm (200 in. lbs). Last, put on the cylinder head cover(s).