How to Service the Sway Bar Bushing in the Front Suspension on Chrysler Town & Country?

First, lift the vehicle, remove the bolts holding the emission leak detection pump to the cradle crossmember reinforcement and then service the sway bar bushing. After moving the leak detection pump away, get to the sway bar cushion retainers by taking out each retainer's securing nut and bolt from the cradle crossmember. Pull each sway bar cushion off the bar by opening the side on each cushion. To fit, insert each cushion at the slit into the sway bar, having the square bushing point down and the cut on the other end facing the back. Place the sway bar in place and align the cushions, then twist the holders onto the right spot on the cradle crossmember and secure each with a bolt from behind while tightening the two nuts to 68 Nm (50 ft. lbs.) torque. Eventually, fix the emission leak detection pump back to the cradle crossmember reinforcement using the two mounting bolts and bring the auto down to normal level.

How to Install a Sway Bar Bushing on Chrysler Town & Country?

The first step is to take one cushion, slide it underneath along the slit and push it onto the sway bar so that the square part of the bushing goes on the bottom and the slit is positioned at the back of the car. With the cushions in the right position, fit the sway bar into its fixed place so the cushions are lined up. After that, insert each retainer into the hole on the cradle crossmember and on top of the cushion. Pass each mounting bolt through the cradle crossmember to the front of the retainer from the rear, install nuts afterward, then tighten them to a torque of 68 Nm (50 ft. lbs.). After that, attach the emission leak detection pump to the cradle crossmember reinforcement using two bolts and lower the vehicle.

OEM Chrysler Town & Country Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Sway Bar Bushings found

View related parts
Chrysler Town & Country Stabilizer Bar Bushing, Front Part Number: 68140000AA
$18.56 MSRP: $26.80
You Save: $8.24 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 4721918AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Stabilizer Bar Bushing, Front Part Number: 4721085AJ
$18.22 MSRP: $27.05
You Save: $8.83 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 4721085AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2011 Chrysler Town & Country | Limited, Touring, Touring L | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Stabilizer Bar Bushing, Front Part Number: 4721918AF
$18.22 MSRP: $27.05
You Save: $8.83 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 5151236AB, 4721085AC, 4721918AA, 4721072AC, 4721085AD, 5151236AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Chrysler Town & Country | LX, Limited, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Stabilizer Bar Cushion, Front Part Number: 4743041AE
$13.34 MSRP: $19.80
You Save: $6.46 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings
- Position: Front
- Replaces: 4743041AD, 4743041AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Stabilizer Bar Cushion, Front Part Number: 4743024AE
$11.66 MSRP: $17.05
You Save: $5.39 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing Kit.; Bushings
- Position: Front
- Replaces: 4743024AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Mirror Assembly, Driver Side Part Number: 4684890
$15.46 MSRP: $33.45
You Save: $17.99 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Kit; Stabilizer Bushing Kit.; Stabilizer Bar Cushion; Bushings; Cushion, Sway Bar Front Suspension; Cushion Sway Eliminator
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Town & Country | Base, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Stabilizer Bar Bushing Part Number: 4228785
Product Specifications
- Other Name: Bushing - Sway Bar; Sway Bar Bushing; Bushings; Bushing, Sway Eliminator Shaft; Bushing Stabilizer Bar; Bushing, Rear Sway Bar
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-2000 Chrysler Town & Country | Base, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Stabilizer Bar Bushing, Front Part Number: 68139999AA
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 4721085AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012 Chrysler Town & Country | Limited, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Stabilizer Bar Bushing, Rear Part Number: 5006124AB
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushing Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler Town & Country | Base, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Stabilizer Bar Bushing, Rear Part Number: 4626015
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar; Bushing, Rear Sway Bar; Shaft, Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004, 1991-1992 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Stabilizer Bar Bushing Part Number: 4449618
Product Specifications
- Other Name: Bushing - Front Suspension Sway Eliminator To Control; Stabilizer Bar Cushion; Bushings for Sway Bar with Standard Suspension.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country Sway Bar Bushing

Choose OEM Sway Bar Bushing that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Sway Bar Bushing follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Sway Bar Bushing in Chrysler Town & Country serves a valet function to improve the comfort of the vehicle's owner while offering enhanced stability of the car. These bushings work to soften up all the road irregularities and cut on noise making while at the same time supporting the sway bar that helps in reducing the lateral movement of the body during cornering. Generally, the Chrysler Town & Country models come equipped with both the front and the rear sway bar bushings to maintain a good handing. At some point, the Sway Bar Bushing can become worn and, therefore, contribute to problems such as poor response, vibrations, and squeaking. It is sad that these symptoms can progress to enable the bigger issues in the aspect of steering and handling which will affect safety. The Sway Bar Bushing must be maintained and lubricated on regular bases in Chrysler Town & Country because warning signs must be seen as crucial signals that must be solved as soon as possible.

Chrysler Town & Country Sway Bar Bushing Parts and Q&A

Stabilizer Bar Cushion, Front
4743041AE
Q: How to Service the Sway Bar Bushing in the Front Suspension on Chrysler Town & Country?
A:
First, lift the vehicle, remove the bolts holding the emission leak detection pump to the cradle crossmember reinforcement and then service the sway bar bushing. After moving the leak detection pump away, get to the sway bar cushion retainers by taking out each retainer's securing nut and bolt from the cradle crossmember. Pull each sway bar cushion off the bar by opening the side on each cushion. To fit, insert each cushion at the slit into the sway bar, having the square bushing point down and the cut on the other end facing the back. Place the sway bar in place and align the cushions, then twist the holders onto the right spot on the cradle crossmember and secure each with a bolt from behind while tightening the two nuts to 68 Nm (50 ft. lbs.) torque. Eventually, fix the emission leak detection pump back to the cradle crossmember reinforcement using the two mounting bolts and bring the auto down to normal level.
Stabilizer Bar Cushion, Front
4743024AE
Q: How to Install a Sway Bar Bushing on Chrysler Town & Country?
A:
The first step is to take one cushion, slide it underneath along the slit and push it onto the sway bar so that the square part of the bushing goes on the bottom and the slit is positioned at the back of the car. With the cushions in the right position, fit the sway bar into its fixed place so the cushions are lined up. After that, insert each retainer into the hole on the cradle crossmember and on top of the cushion. Pass each mounting bolt through the cradle crossmember to the front of the retainer from the rear, install nuts afterward, then tighten them to a torque of 68 Nm (50 ft. lbs.). After that, attach the emission leak detection pump to the cradle crossmember reinforcement using two bolts and lower the vehicle.