How to Install a New Trunk Lid Latch Assembly on Chrysler Town & Country?

The first step is to move the power locking latch cable from the previous latch to the new latch assembly. Place the power liftgate latch in the liftgate, add the retaining screws and tighten them to 11 Nm or 95 in. lbs. Link the latch electrical connector and run the power locking latch cable to the exterior liftgate handle so it is connected to the handle. Once that's done, put on the liftgate trim panel and secure the battery negative cable once again. Once done, verify the alignment of the liftgate.

How to Remove and Repair a Trunk Lid Latch on Chrysler Town & Country?

The first step to working on the trunk or liftgate latch is to take off the liftgate trim panel. After that, pull the lock cylinder key from its clip and cut the wire connector that links the liftgate to the latch. Once those holes are drilled, remove the screws holding the latch to the liftgate and then take out the latch from the vehicle.

OEM Chrysler Town & Country Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Trunk Lid Latches found

View related parts
Chrysler Town & Country Lock Actuator, Rear Part Number: 4589581AL
$393.88 MSRP: $575.00
You Save: $181.12 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Rear Trunk Lock Actuator Motor; Door Lock Actuator; Trunk Latch.; Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 4589581AF, 4589581AI, 4589581AC, 4589581AB, 4589581AE, 4589581AG, 4589581AJ, 4589581AK, 4589581AD, 4589581AH, 4589581AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Lock Actuator, Rear Part Number: 4589243AC
$78.97 MSRP: $117.00
You Save: $38.03 (33%)
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Rear Trunk Lock Actuator Motor; Door Lock Actuator; Trunk Latch.; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 4589243AB, 4589243AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Liftgate Latch Part Number: 4589243AH
$185.81 MSRP: $276.00
You Save: $90.19 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch-Liftgate; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 4589243AG, 4589243AF, 4589243AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Lock, Rear Part Number: 4717674AF
$410.67 MSRP: $580.00
You Save: $169.33 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Liftgate Latch, Rear; Door Lock Actuator Motor; Door Lock Actuator; Trunk Latch; Door Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 4717674AE, 4717674AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Lock, Rear Part Number: 5019039AA
$263.00 MSRP: $347.00
You Save: $84.00 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Liftgate Latch, Rear; Door Lock Actuator Motor; Door Lock Actuator; Trunk Latch; Door Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 5019039AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Lock Part Number: 4675776AB
Product Specifications
- Other Name: Latch - Liftgate; Latch Lift Gate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Town & Country | Base, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Lock, Rear Part Number: 4717992AD
Product Specifications
- Other Name: Latch - Liftgate; Liftgate Latch, Rear; Door Lock Actuator Motor; Door Lock Actuator; Trunk Latch; Door Lock; Latch; Latch Lift Gate
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country Trunk Lid Latch

Choose OEM Trunk Lid Latch that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Trunk Lid Latch follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Town & Country vehicles has the Trunk Lid Latch whose purpose is to lock the trunk lid and make sure that anything put in the trunk is safe and cannot be accessed by anyone. This somewhat looks like a seat belt, which needs to be pulled to unlock it. Made from materials that can last for long it is mostly stainless steel that is used in the construction of Chrysler Town & Country Trunk Lid Latch to avoid cases of the trunk opening while the car is in motion due to strong winds. Different Trunk Lid Latch have been used in Chrysler Town & Country manufactured over the years with major considerations on reliability and security. A properly working Trunk Lid Latch ensures that items are protected, and at the same time helps to discourage mischief makers. Maintenance should be done frequently because if components become worn or rusty, it will make the latch ineffective putting people at risk of getting injured.

Chrysler Town & Country Trunk Lid Latch Parts and Q&A

Lock Actuator, Rear
4589581AL
Q: How to Install a New Trunk Lid Latch Assembly on Chrysler Town & Country?
A:
The first step is to move the power locking latch cable from the previous latch to the new latch assembly. Place the power liftgate latch in the liftgate, add the retaining screws and tighten them to 11 Nm or 95 in. lbs. Link the latch electrical connector and run the power locking latch cable to the exterior liftgate handle so it is connected to the handle. Once that's done, put on the liftgate trim panel and secure the battery negative cable once again. Once done, verify the alignment of the liftgate.
Lock, Rear
5019039AA
Q: How to Remove and Repair a Trunk Lid Latch on Chrysler Town & Country?
A:
The first step to working on the trunk or liftgate latch is to take off the liftgate trim panel. After that, pull the lock cylinder key from its clip and cut the wire connector that links the liftgate to the latch. Once those holes are drilled, remove the screws holding the latch to the liftgate and then take out the latch from the vehicle.