How to Maintain and Fix a Door Lock Cylinder on Chrysler Voyager?

Roll the door glass upward and pull out the watershield in the front to get access to the handle of the outside door. Take off the Vehicle Theft Security System (VTSS) switch connector from the door harness in the access hole at the rear of the inner door panel and disengage the push-in fasteners joining the VTSS switch harness to the inner door by pulling them out from the door, if marked. After that, unhook the clip securing the door latch linkage to the door latch and take the linkage out of the latch. After that, loosen the clip able the door lock linkage and pull the linkage away from the latch. Get rid of the nuts tying the outside door handle to the door panel and pull the handle off the vehicle. Take out the clip throughout the lock cylinder and pull the cylinder out from the handle outside the door. To install the lock, put the clip on the outer handle, keep the arm behind the door and push the lock cylinder into the handle until it snaps. Insert the lock linkage into the door latch and push the clip to hold them together. Following this, fit the latch linkage inside the door latch and clip it to affix the two together. If available, place push-in fasteners to link the VTSS switch harness to the inner door reinforcement bar and also add the VTSS switch connector to the door harness, if equipped. After that, make sure the door latches correctly and reinstall the watershield and door trim panel.

OEM Chrysler Voyager Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Door Lock Cylinders found

View related parts
Chrysler Voyager Lock Cylinder, Front Part Number: 68289893AB
$46.11 MSRP: $66.25
You Save: $20.14 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Door Lock; Door Lock Cylinder, Front; Cylinder Door Lock; Door Lock Cylinder
- Position: Front
- Replaces: 68289893AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Lock Cylinder, Front Part Number: 5011040AA
$63.28 MSRP: $93.15
You Save: $29.87 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Lock - Door Lock; Sliding Door Lock Cylinder; Door Lock Cylinder, Front; Cylinder Door Lock Doors & Tailgate; Cylinder Door Lock; Door Lock Cylinder
- Position: Front
- Replaces: 5056182AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Lock Cylinder Part Number: 4778124
Product Specifications
- Other Name: Cylinder Lock; Trunk Lock Cylinder; Door Lock Cylinder; Cylinder Lock Package
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Chrysler Voyager Door Lock Cylinder

Choose OEM Door Lock Cylinder that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Door Lock Cylinder follows strict manufacturing steps to lock in quality and fit. If your Chrysler Voyager matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Voyager parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

This part is the Chrysler Voyager Door Lock Cylinder, which is a key piece in Chrysler vehicles; the component epitomises reliability and performance. Specifically intended for the locking and unlocking of the doors of different Voyager models, this Door Lock Cylinder makes it possible to conveniently and securely gain entry into the vehicle's cabin. While most car manufacturers are gradually phasing out such mechanisms in the current models, Chrysler Voyager is still not left behind in embracing hegemonic security technology; Door Lock Cylinder. This component is especially vital for the efficient functioning of the Chrysler Voyager, as with time, such items are vulnerable to wear, which can cause inconvenience, for example, if the key sticks or doesn't turn. This is why it is crucial to service and replace the Door Lock Cylinder in a regular manner to maintain the safety as well as functionality of the Chrysler Voyager. The Door Lock Cylinder is fitted on the Voyager and comes in various versions comprehensively meeting the standards of Chrysler lovers. However, Chrysler Voyager Door Lock Cylinder is unique among automotive entrees because of its solid structure and simplicity in usage; hence the company can be certain that their product will last for many years. Thus, the vehicle with the total sales of more than 12 000 000 minivans - Chrysler Voyager - is the evidence to that; and Door Lock Cylinder being our product, ensures the company's reputation for reliability and quality.

Chrysler Voyager Door Lock Cylinder Parts and Q&A

Lock Cylinder, Front
5011040AA
Q: How to Maintain and Fix a Door Lock Cylinder on Chrysler Voyager?
A:
Roll the door glass upward and pull out the watershield in the front to get access to the handle of the outside door. Take off the Vehicle Theft Security System (VTSS) switch connector from the door harness in the access hole at the rear of the inner door panel and disengage the push-in fasteners joining the VTSS switch harness to the inner door by pulling them out from the door, if marked. After that, unhook the clip securing the door latch linkage to the door latch and take the linkage out of the latch. After that, loosen the clip able the door lock linkage and pull the linkage away from the latch. Get rid of the nuts tying the outside Door Handle to the door panel and pull the handle off the vehicle. Take out the clip throughout the lock cylinder and pull the cylinder out from the handle outside the door. To install the lock, put the clip on the outer handle, keep the arm behind the door and push the lock cylinder into the handle until it snaps. Insert the lock linkage into the door latch and push the clip to hold them together. Following this, fit the latch linkage inside the door latch and clip it to affix the two together. If available, place push-in fasteners to link the VTSS switch harness to the inner door reinforcement bar and also add the VTSS switch connector to the door harness, if equipped. After that, make sure the door latches correctly and reinstall the watershield and door trim panel.