How to Service and Repair a Front Parking Brake Cable on Chrysler Voyager?

Raise the vehicle using jack stands or a hoist and then release the tension of the automatic self-adjusting mechanism on the parking brake lever assembly by hand. Take out the park brake housing and remove the left rear park brake cable from the equalizer, then slide the retainer on the front park cable out from under the body outrigger bracket by gently expanding the three fingers holding it with a 14 mm box wrench or use an aircraft hose clamp and a screwdriver. Lower the car and remove the left front door sill molding and left front kick panel to open up the park brake cable. After lifting the floor mat, reach inside the car and pull the seal and park brake cable out of the floor pan. Work the concave end of the cable strand across the clevis and tap out the cylinder at the bracket of the pedal assembly to detach the button. Pull the parking brake lever assembly bracket lever one time to separate its retainer and remove the front parking brake cable from inside the vehicle through the floor pan. While you're sitting in the vehicle, place the front parking brake cable assembly through the hole in the floor pan, then through the opening in the lever assembly bracket. Attach the park brake cable retainer to the park brake cable, then through the retainer insert the end of the park brake cable. Link the cable strand button to the clevis on the park brake pedal mechanism and secure the front park brake cable floor pan seal into the hole in the floor pan, with the flange level before the carpeting is folded down. Raise the vehicle up once more and slide both the brake cable and its housing into the outrigger bracket inside the body, so the retainer fingers keep them held in place securely. After resetting the tension, connect both side cable ends to the park brake cable equalizer, lower the vehicle and use the pedal to set the cables in place.

How to Maintain the Left Rear Parking Brake Cable on Chrysler Voyager?

Before fixing the left rear parking brake cable, lift the car onto jackstands or a hoist and get rid of the tire and wheel assembly from the rear. After that, remove the rear brake drum so you can work on the park brake cable. Make room in the rear park brake cables by engaging the automatic adjuster lock at the reservoir; pull down on the front park brake cable near the equalizer and be sure to put locking pliers on above the second body outrigger bracket in the rear. Free the cable housing from the body bracket by placing a 14 mm box end wrench over the retainer end to compress the three fingers or using an aircraft hose clamp. Eliminate the brake shoes from the brake support plate and bend the parking brake cable where it attaches to the parking brake actuator lever. To take out the retaining device, compress the retaining fingers with a 14 mm wrench and remove it from the brake support plate by the cable housing. To mount your parking brake cable, put the end with the fingers in the brake support plate and put the cable housing into it, locking it by allowing the retainer fingers to grab and secure the housing. Secure the parking brake cable to the park brake actuator lever, install the shoe brake onto the rear brake support and assemble the cable housing retainer to the body's outrigger bracket, with it locked unto the bracket. Connect the rear parking brake cable to the equalizer bracket, replace the brake drum and wheel plus f and install the tire. Lastly, take off the locking pliers from the front park brake cable so it adjusts automatically, do a quick pump of the brake pedal to seat the cables in place and you're done.

OEM Chrysler Voyager Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Parking Brake Cables found

View related parts
Chrysler Voyager Rear Cable Part Number: 4721026AE
$61.82 MSRP: $131.00
You Save: $69.18 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Intermediate Cable Part Number: 4683286AF
$70.46 MSRP: $146.00
You Save: $75.54 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 4683286AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Intermediate Cable Part Number: 5066142AA
$39.66 MSRP: $79.75
You Save: $40.09 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake
- Replaces: 4683286AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 2.4L L4, 3.0L V6, 3.3L V6, 3.8L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rear Cable Part Number: 4721028AJ
$90.56 MSRP: $170.00
You Save: $79.44 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Voyager | LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rear Cable Part Number: 4721026AK
$143.06 MSRP: $239.00
You Save: $95.94 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 4721026AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rear Cable Part Number: 4721027AL
$52.23 MSRP: $85.50
You Save: $33.27 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 4721027AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Voyager | LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rear Cable Part Number: 4721027AE
$20.88 MSRP: $30.00
You Save: $9.12 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 4721027
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Front Cable Part Number: 4683285
$19.23 MSRP: $24.75
You Save: $5.52 (23%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Assembly, Front Parking Brake; Cable Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chrysler Voyager | Base, Ec, LX, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rear Cable Part Number: 4683298AD
$29.81 MSRP: $37.79
You Save: $7.98 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Voyager | LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rear Cable Part Number: 4683299AE
$30.51 MSRP: $38.67
You Save: $8.16 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chrysler Voyager | Base, Ec, LX, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rear Cable Part Number: 4683300AC
$35.90 MSRP: $45.51
You Save: $9.61 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Voyager | LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rear Cable Part Number: 4683300
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable, Rear Parking Brake; Cable Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Chrysler Voyager | Base, Ec, LX, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rear Cable Part Number: 4683298
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable, Rear Parking Brake; Cable Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rear Cable Part Number: 4721029AL
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 4721029AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chrysler Voyager | Base, Ec, LX, SE | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rear Cable Part Number: 5066144AA
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 4683301AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Chrysler Voyager Parking Brake Cable

Choose OEM Parking Brake Cable that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Parking Brake Cable follows strict manufacturing steps to lock in quality and fit. If your Chrysler Voyager matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Voyager parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Voyager Parking Brake Cable plays an important role of the vehicle's parking brake system to maintain the stationary position of Chrysler Voyager particularly when parked on a slope. This Parking Brake Cable gives the parking brake a connection to the rest of the brakes while engaging the parking brakes hence producing the prime performance as is well known for. Better compatibility with the Chrysler Voyager edition also increases its desirability, as these vehicles are used by different people who rely on the Voyager for commuting. The importance of the Chrysler Voyager Parking Brake Cable cannot be gainsaid; a bad cable came with low tension and this may pose a risk to the vehicle. This perhaps is a very important component of the Chrysler Voyager hence it is crucial that it undergoes regular maintenance so as to enhance the parking brake systems performance without compromising on the safety of the users. First of all, it should be stated that the Chrysler Voyager Parking Brake Cable is created with the focus on its usefulness and eagerness to serve for a long time; it is often equipped with high-quality materials that will not yield to wear and tear, which helps the given product to stand out on the automotive market. Due to this particular feature, the design helps to reduce the probability of snapping; thus improving the safety of automobiles. Being a part of the extended offerings of the Chrysler Voyager and given the vehicle's sheer history as a family favorite, the Parking Brake Cable is a vital part of the vehicle's system. In conclusion, the Chrysler Voyager Parking Brake Cable is a perfect representation of Chrysler's focus to standards and guarantees that every ride in a Chrysler Voyager is secure and successful.

Chrysler Voyager Parking Brake Cable Parts and Q&A

Intermediate Cable
4683286AF
Q: How to Service and Repair a Front Parking Brake Cable on Chrysler Voyager?
A:
Raise the vehicle using jack stands or a hoist and then release the tension of the automatic self-adjusting mechanism on the parking brake lever assembly by hand. Take out the park brake housing and remove the left rear park brake cable from the equalizer, then slide the retainer on the front park cable out from under the body outrigger bracket by gently expanding the three fingers holding it with a 14 mm box wrench or use an aircraft hose clamp and a screwdriver. Lower the car and remove the left front door sill molding and left front kick panel to open up the park brake cable. After lifting the floor mat, reach inside the car and pull the seal and park brake cable out of the floor pan. Work the concave end of the cable strand across the clevis and tap out the cylinder at the bracket of the pedal assembly to detach the button. Pull the parking brake lever assembly bracket lever one time to separate its retainer and remove the front parking brake cable from inside the vehicle through the floor pan. While you're sitting in the vehicle, place the front parking brake cable assembly through the hole in the floor pan, then through the opening in the lever assembly bracket. Attach the park brake cable retainer to the park brake cable, then through the retainer insert the end of the park brake cable. Link the cable strand button to the clevis on the park brake pedal mechanism and secure the front park brake cable floor pan seal into the hole in the floor pan, with the flange level before the carpeting is folded down. Raise the vehicle up once more and slide both the brake cable and its housing into the outrigger bracket inside the body, so the retainer fingers keep them held in place securely. After resetting the tension, connect both side cable ends to the park brake cable equalizer, lower the vehicle and use the pedal to set the cables in place.
Rear Cable
4683299AE
Q: How to Maintain the Left Rear Parking Brake Cable on Chrysler Voyager?
A:
Before fixing the left rear parking brake cable, lift the car onto jackstands or a hoist and get rid of the tire and wheel assembly from the rear. After that, remove the rear Brake Drum so you can work on the park brake cable. Make room in the rear park brake cables by engaging the automatic adjuster lock at the reservoir; pull down on the front park brake cable near the equalizer and be sure to put locking pliers on above the second body outrigger bracket in the rear. Free the cable housing from the body bracket by placing a 14 mm box end wrench over the retainer end to compress the three fingers or using an aircraft hose clamp. Eliminate the brake shoes from the brake support plate and bend the parking brake cable where it attaches to the parking brake actuator lever. To take out the retaining device, compress the retaining fingers with a 14 mm wrench and remove it from the brake support plate by the cable housing. To mount your parking brake cable, put the end with the fingers in the brake support plate and put the cable housing into it, locking it by allowing the retainer fingers to grab and secure the housing. Secure the parking brake cable to the park brake actuator lever, install the shoe brake onto the rear brake support and assemble the cable housing retainer to the body's outrigger bracket, with it locked unto the bracket. Connect the rear parking brake cable to the equalizer bracket, replace the brake drum and wheel plus f and install the tire. Lastly, take off the locking pliers from the front park brake cable so it adjusts automatically, do a quick pump of the brake pedal to seat the cables in place and you're done.