How to Service and Repair the Throttle Body on 2.0 and 2.4L Engines on Dodge Avenger?

The very first step when servicing the throttle body in 2.0 and 2.4L engines is to disconnect the negative battery cable to avoid the throttle plate from moving and posing a risk to you. Get rid of the throttle body air intake hose and cut off the throttle body electrical connector from the throttle body. thlettion to the intake manifold. Check the intake manifold to throttle body gasket for any damage and be sure to check the four J-nuts for wear. You must replace any parts that are not in good condition.

How to Install a Throttle Body on 2.0 and 2.4L Engines on Dodge Avenger?

For 2.0 and 2.4L engines, put a new intake manifold to throttle body gasket (2) on if it needs replacing and install four new j-nuts (1) where required. It's important to avoid overtorquing, because this can harm the throttle body, gaskets, bolts or intake manifold. After that, attach the throttle body assembly (4) to the intake manifold and bolt (2) it with the throttle body support bracket (3) in place, but do not use a wrench. After that, secure four screws (1) with your hands and use a cross pattern to apply mandatory torquing to the throttle body. Use the torque wrench to tighten the bolts: loosen 7.5 Nm (65 in. lbs.) and bracket bolt to 25 Nm (18 ft. lbs.). Take the electrical connector and attach it to the throttle body; fit the clean air hose and tighten all the clamps until they reach 4 Nm (35 in. lbs.). Next, reconnect the negative battery cable and tighten the nut to 5 Nm (45 in. lbs.) using your scanner, clear all errors and perform the Etc Relearn operation.

OEM Dodge Avenger Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Throttle Bodies found

View related parts
Dodge Avenger Throttle Body Part Number: 4861691AA
$292.31 MSRP: $430.00
You Save: $137.69 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.
- Replaces: 4861694AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | R/T, SE, SXT | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Avenger Throttle Body Part Number: 5184349AF
$435.37 MSRP: $662.00
You Save: $226.63 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly; Electronic Throttle Body Module
- Replaces: 5184349AE, 5184349AC, 5184349AD, 5184349AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Throttle Body Part Number: 4891735AD
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.; Throttle Body Includes Throttle Position Sensor
- Replaces: 4891735AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Throttle Body Part Number: 4669860
Product Specifications
- Other Name: Body, Throttle
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS
View related parts
Dodge Avenger Throttle Body Part Number: 4591390
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Dodge Avenger | Base, ES | 6 Cyl 2.5 L GAS

Dodge Avenger Throttle Body

Choose OEM Throttle Body that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Throttle Body follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Throttle Body for Dodge Avenger cars is a significant part which controls the quantity of air permitted into the engine displacing, thereby, performance and fuel consumption. Located between the air cleaner and intake manifold,it has a butterfly valve that opens as a result of accelerator pedal command in order to let in more air into the engines. This action causes the Powertrain Control Module (PCM) to change the rate of fuel injection hence providing the optimal level of air-fuel mixture. It is worthy to note that, Dodge Avenger models have migrated from mechanical throttle control to the ETC system that improves the performance and compatibility of the vehicle with safety applications. As for the previous models Throttle Body Injection (TBI) could be used while the up-to-date ones mostly incorporate multi-port fuel injection systems. One of the subassemblies of the Throttle Body is the Throttle Position Sensor or TPS and the Idle Air Control valve or IAC. On average, the Throttle Body in Dodge Avenger cars show new technological development in the automotive industry reduction of fuel consumption and emissions.

Dodge Avenger Throttle Body Parts and Q&A

Throttle Body
4861691AA
Q: How to Service and Repair the Throttle Body on 2.0 and 2.4L Engines on Dodge Avenger?
A:
The very first step when servicing the throttle body in 2.0 and 2.4L engines is to disconnect the negative Battery Cable to avoid the throttle plate from moving and posing a risk to you. Get rid of the throttle body air intake hose and cut off the throttle body electrical connector from the throttle body. thlettion to the Intake Manifold. Check the intake manifold to throttle body gasket for any damage and be sure to check the four J-nuts for wear. You must replace any parts that are not in good condition.
Throttle Body
4891735AD
Q: How to Install a Throttle Body on 2.0 and 2.4L Engines on Dodge Avenger?
A:
For 2.0 and 2.4L engines, put a new Intake Manifold to throttle body gasket (2) on if it needs replacing and install four new j-nuts (1) where required. It's important to avoid overtorquing, because this can harm the throttle body, gaskets, bolts or intake manifold. After that, attach the throttle body assembly (4) to the intake manifold and bolt (2) it with the throttle body support bracket (3) in place, but do not use a wrench. After that, secure four screws (1) with your hands and use a cross pattern to apply mandatory torquing to the throttle body. Use the torque wrench to tighten the bolts: loosen 7.5 Nm (65 in. lbs.) and bracket bolt to 25 Nm (18 ft. lbs.). Take the electrical connector and attach it to the throttle body; fit the clean air hose and tighten all the clamps until they reach 4 Nm (35 in. lbs.). Next, reconnect the negative Battery Cable and tighten the nut to 5 Nm (45 in. lbs.) using your scanner, clear all errors and perform the Etc Relearn operation.