How to Install the Right Front Air Duct and Its Components on Dodge Caliber?

Fit the front floor duct securely with the HVAC housing and connect the front floor duct to the pad position so that it is fully active. Install the instrument panel as the following step. Attach the left front floor duct to the left section of the HVAC housing and then tighten the fastening screw to 17 in. lbs. On LHD cars, place the steering column cover inside the column, but on RHD cars, insert the cover behind the instrument panel. Join the left and right rear floor ducts to the HVAC housing, checking for a good fit, after which connect the rear seat floor ducts and the instrument panel. For the rear seat floor ducts, join the rear seat floor duct to the rear floor distribution duct, making sure there is full contact, then set the retaining screw to 2.2 Nm (20 in. lbs.) when you secure it to the support with the retainer. Installing the carpet is the last step, then position the front seat in the serviced area and put in the middle console unit to finish.

How to Safely Service and Repair an Air Duct on Dodge Caliber?

Separate and isolate the negative battery cable to prevent flows from the air bag system and wait after that for the two-minute emptying of the air bag system's capacitor. This is done so that air bags only function correctly during a collision. Remove the top cover of the instrument panel as the first step. Following that, unhook the left and right demister ducts (5 and 7) from the defroster duct (2). Don't forget to work on each side separately. On the passenger side, in the center, remove the two screws (3) attaching the defroster duct to the support (4) and any screws that fasten the support to the instrument panel (6) and then set the support aside. After all, remove the duct from the defroster system in the instrument panel.

OEM Dodge Caliber Air Duct

Air Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Ducts found

View related parts
Dodge Caliber Hose, Front Driver Side Part Number: 4891621AC
$67.68 MSRP: $102.00
You Save: $34.32 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Clean Air; Engine Air Intake Hose, Front Left; Intake Coupling; Hose Clean Air; Air Intake Hose
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Hose, Front Driver Side Part Number: 5037919AB
$36.03 MSRP: $66.35
You Save: $30.32 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Clean Air; Engine Air Intake Hose, Front Left; Intake Coupling; Hose Clean Air; Air Intake Hose
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Caliber | SRT-4 | 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Air Inlet Duct Part Number: 5058297AC
$32.83 MSRP: $42.55
You Save: $9.72 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Duct - Air Inlet; Instrument Panel Air Duct; Inlet Duct; Duct Air Inlet
- Replaces: 5058297AA, 5058297AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Intake Duct, Front Part Number: 4593912AB
Product Specifications
- Other Name: Duct - Fresh Air; Engine Air Intake Hose, Front; Duct Fresh Air
- Position: Front
- Replaces: 4891630AC, 4891630AD, 4891630AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Intake Duct, Front Part Number: 5037918AC
Product Specifications
- Other Name: Duct - Fresh Air; Engine Air Intake Hose, Front; Duct Fresh Air
- Position: Front
- Replaces: 5037918AA, 5037918AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS

Dodge Caliber Air Duct

Choose OEM Air Duct that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Air Duct follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Reliability along with performance enhancement represents the fundamental function of the Dodge Caliber Air Duct as an essential vehicle component. The Air Duct operates with the air filter to pull in clean air which results in filtered air reaching the engine. Engine durability depends on the Air Duct since unfiltered air entering the system creates both operational problems and deteriorates engine components. Customers who use Dodge Caliber vehicles either as SE or SXT versions can pick the Dodge Caliber Air Duct because it works with multiple model types. The Air Duct plays an essential role in the system because the Mass Air Flow sensor measures ambient air to establish the proper fuel mixture required for maximum engine performance. Such functionality is mandatory to stop lean conditions which damage engine operation. The Dodge Caliber Air Duct delivers both engine protection and improved safety and performance features that contribute to the reliability image of this vehicle model. The Air Duct makes a strong impression within the automotive market while remaining an essential factor for the Dodge Caliber to maintain its popular position as a dependable high-performing vehicle.

Dodge Caliber Air Duct Parts and Q&A

Intake Duct, Front
4593912AB
Q: How to Install the Right Front Air Duct and Its Components on Dodge Caliber?
A:
Fit the front floor duct securely with the HVAC housing and connect the front floor duct to the pad position so that it is fully active. Install the instrument panel as the following step. Attach the left front floor duct to the left section of the HVAC housing and then tighten the fastening screw to 17 in. lbs. On LHD cars, place the Steering Column Cover inside the column, but on RHD cars, insert the cover behind the instrument panel. Join the left and right rear floor ducts to the HVAC housing, checking for a good fit, after which connect the rear seat floor ducts and the instrument panel. For the rear seat floor ducts, join the rear seat floor duct to the rear floor distribution duct, making sure there is full contact, then set the retaining screw to 2.2 Nm (20 in. lbs.) when you secure it to the support with the retainer. Installing the carpet is the last step, then position the front seat in the serviced area and put in the middle console unit to finish.
Hose, Front Driver Side
4891621AC
Q: How to Safely Service and Repair an Air Duct on Dodge Caliber?
A:
Separate and isolate the negative Battery Cable to prevent flows from the air bag system and wait after that for the two-minute emptying of the air bag system's capacitor. This is done so that air bags only function correctly during a collision. Remove the top cover of the instrument panel as the first step. Following that, unhook the left and right demister ducts (5 and 7) from the defroster duct (2). Don't forget to work on each side separately. On the passenger side, in the center, remove the two screws (3) attaching the defroster duct to the support (4) and any screws that fasten the support to the instrument panel (6) and then set the support aside. After all, remove the duct from the defroster system in the instrument panel.