How to Install a Throttle Body on Dodge Caliber?

Installing the throttle body begins with replacing the intake manifold to throttle body gasket (2) and installing new four j-nuts (1), if you have them. Avoid accidental overtightening, as it might damage the throttle body, gaskets, bolts or the intake manifold. Attach the throttle body (4) to the intake manifold and use bolt (2) to fasten the throttle body support bracket (3) firmly so that the bracket bolt is tightened to 25 Nm (18 ft. lbs.). Turn four bolts (1) by hand and make sure the throttle body is correctly and firmly torqued by crossing the bolts. Apply 7.5 Nm (65 in. lbs.) to the bolts in the order shown in the instruction. Attach the connector to the throttle body with the clamps tightened to 4 Nm (35 in. lbs.) and afterward place the clean air hose on the engine. Again connect the negative battery cable and tighten its nut to 5 Nm (45 in. lbs.). At the end, scan your car to erase any codes and carry out the Etc Relearn command.

OEM Dodge Caliber Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Body found

View related parts
Dodge Caliber Throttle Body Part Number: 4891735AD
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.; Throttle Body Includes Throttle Position Sensor
- Replaces: 4891735AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Caliber Throttle Body

Choose OEM Throttle Body that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Throttle Body follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Throttle Body is a key component that goes in the Dodge Caliber cars and boosts the performance and durability of the car. This complex component regulates the amount of fresh air drawn into the engine's cylinder using a butterfly valve whose movement is determined by the position of the accelerator pedal to achieve the right air/fuel mixture for combustion. The Throttle Body has developed from throttle body injection or TBI systems to multi-port fuel injection systems that every come with electronic throttle control or ETC for better reliability and compatibility with other protection features. This also improves the engine power while at the same time improving the actual feel of the car making Dodge Caliber a class on its own. Suitable to JTHLE, JT, JX, and other types of Dodge Caliber produced from 2007 through 2012, the Throttle Body is an essential component for any vehicle. The Throttle Body keeps the precision of the vehicle's control, especially concerning the engine, intact and the Dodge Caliber is famous for its safety features and ratings. Also, TPS sensors and IAC valves, the nature of which allows for efficient maintenance, add to the Throttle Body's great reliability. In this respect, performance and efficiency, along with three key aspects of safety, remain central to the automotive consumers' experience of using the Throttle Body and driving appreciation for vehicles, throughout the market and for the specifications of the compatible Dodge Caliber.

Dodge Caliber Throttle Body Parts and Q&A

Throttle Body
4891735AD
Q: How to Install a Throttle Body on Dodge Caliber?
A:
Installing the throttle body begins with replacing the Intake Manifold to throttle body gasket (2) and installing new four j-nuts (1), if you have them. Avoid accidental overtightening, as it might damage the throttle body, gaskets, bolts or the intake manifold. Attach the throttle body (4) to the intake manifold and use bolt (2) to fasten the throttle body support bracket (3) firmly so that the bracket bolt is tightened to 25 Nm (18 ft. lbs.). Turn four bolts (1) by hand and make sure the throttle body is correctly and firmly torqued by crossing the bolts. Apply 7.5 Nm (65 in. lbs.) to the bolts in the order shown in the instruction. Attach the connector to the throttle body with the clamps tightened to 4 Nm (35 in. lbs.) and afterward place the clean air hose on the engine. Again connect the negative Battery Cable and tighten its nut to 5 Nm (45 in. lbs.). At the end, scan your car to erase any codes and carry out the Etc Relearn command.