How to Install a Coolant Temperature Sensor in a Gas Engine on Dodge Caliber?

Before you install, coat the ring of the Engine Coolant Temperature Sensor with coolant. After that, lock the ECT Sensor (1) in place and plug in the ECT Sensor electrical connector. After that, put fluid in the cooling system and secure the negative battery cable. First, attach the ECT Sensor in the cylinder block, tighten it to 19 Nm (168 in. lbs.), connect its cable, fill the cooling system and then put back the negative battery cable.

How to Maintain a Coolant Temperature Sensor in a Gas Engine on Dodge Caliber?

Always start by disconnecting the negative battery cable before you service a gas engine's Engine Coolant Temperature Sensor. Located in a cylinder, drain the cooling system just below the ECT Sensor, cut off the electrical cable and remove the ECT Sensor. Also for the sensor with the coolant adapter, disconnect the negative cable from the battery, lower the coolant line below the ECT Sensor, take out the ECT Sensor electrical connector and disconnect and remove the ECT Sensor.

OEM Dodge Caliber Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Coolant Temperature Sensors found

View related parts
Dodge Caliber Coolant Temperature Sensor Part Number: 5033313AA
$38.81 MSRP: $57.50
You Save: $18.69 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Temperature Sensor; Sensor Coolant Temperature Intake Manifold; Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Coolant Temperature Sensor Part Number: 5033314AA
$24.12 MSRP: $35.70
You Save: $11.58 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Temperature; Engine Coolant Temperature Sensor; Temperature Sensor; Oil Pressure Sending Unit; Temperature Sending Unit; Coolant Temperature Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2012 Dodge Caliber | Express, Heat, Mainstreet, Rush, SE, SXT, SXT Plus, Uptown | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Temperature Sending Unit Part Number: 68001313AB
$20.71 MSRP: $29.75
You Save: $9.04 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Temperature; Engine Coolant Temperature Sensor; Coolant Temperature Sensor; Sensor Temperature
- Replaces: 68001313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Temperature Sending Unit Part Number: 5149246AA
Product Specifications
- Other Name: Sensor - Coolant Temperature; Sensor Coolant Temperature; Sensor Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Caliber | Express, Heat, Mainstreet, SE, SXT, Uptown | 4 Cyl 2.0 L GAS

Dodge Caliber Coolant Temperature Sensor

Choose OEM Coolant Temperature Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Coolant Temperature Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Coolant Temperature Sensor is the part that greatly improves the dependability and efficiency of Dodge Caliber cars. This sensor constantly checks the temperature of the coolant so as to enable the engine run at the premier cope. Hence the Coolant Temperature Sensor is highly useful in avoiding overheating through accurate temperature readings serving to protect the engine and enhance its durability. Depending on the type of model, some Durant sensors produced between 2007 and 2012 may be appropriate for compatible Dodge Caliber models, the specific needs of each variants are met, and all the necessary interfaces are used. The Coolant Temperature Sensor is also a safety feature that helps to maintain the required operating temperatures; the Dodge Caliber has numerous safety features. However, the Coolant Temperature Sensor is particularly prominent in the automobile market because of sturdy build, which has incorporated with precise engineering capability. Notably, my understanding of its function indicates that the device's capacity to feed necessary data to the engine control unit makes it beneficial to increase efficient fuel consumption and performance, making it important for owners of the Dodge Caliber. The Coolant Temperature Sensor of Dodge Caliber is one of the most envious and efficient design that makes Dodge Company the premier in the market by providing quality and innovative features that make driving easy and safe.

Dodge Caliber Coolant Temperature Sensor Parts and Q&A

Coolant Temperature Sensor
5033313AA
Q: How to Install a Coolant Temperature Sensor in a Gas Engine on Dodge Caliber?
A:
Before you install, coat the ring of the Engine Coolant Temperature Sensor with coolant. After that, lock the ECT Sensor (1) in place and plug in the ECT Sensor electrical connector. After that, put fluid in the cooling system and secure the negative Battery Cable. First, attach the ECT Sensor in the cylinder block, tighten it to 19 Nm (168 in. lbs.), connect its cable, fill the cooling system and then put back the negative battery cable.
Coolant Temperature Sensor
5033314AA
Q: How to Maintain a Coolant Temperature Sensor in a Gas Engine on Dodge Caliber?
A:
Always start by disconnecting the negative Battery Cable before you service a gas engine's Engine Coolant Temperature Sensor. Located in a cylinder, drain the cooling system just below the ECT Sensor, cut off the electrical cable and remove the ECT Sensor. Also for the sensor with the coolant adapter, disconnect the negative cable from the battery, lower the coolant line below the ECT Sensor, take out the ECT Sensor electrical connector and disconnect and remove the ECT Sensor.