How to Service and Repair a MAP Sensor on Dodge Caliber?

The Manifold Pressure/Vacuum Sensor should be serviced by first disconnecting the negative battery cable. After that, remove the connector from the MAP sensor. After that, unscrew the gauge that holds the MAP sensor and remove the sensor.

How to Install a MAP Sensor on Dodge Caliber?

The first step is to attach the manifold absolute pressure (MAP) sensor to the intake manifold. After that, tighten the screw by hand to 4.5 Nm (40 in. lbs.). Following that, attach the electrical connector to the sensor and astride reconnect the negative battery cable.

OEM Dodge Caliber MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
Dodge Caliber M.A.P. Sensor Part Number: 5033310AB
$69.00 MSRP: $102.00
You Save: $33.00 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5149092AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Map Sensor Part Number: 5149056AA
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Sensor Map; Pressure Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Caliber | SRT-4 | 4 Cyl 2.4 L GAS

Dodge Caliber MAP Sensor

Choose OEM MAP Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each MAP Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The MAP Sensor is a vital and an incredible device, which, in a great way boosts the performance of Dodge Caliber vehicles. This kind of MAP Sensor tracks the positive air pressure within the intake manifold to pass the real time data to the engine control unit (ECU) in relation to the fuel calibration. This position makes calculating air density possible with the help of MAP Sensor to provide the optimal proportions of the air-fuel mixture for combustion, which is important for and engines, naturally aspirated or forced, installed in the Dodge Caliber models. The MAP Sensor is known for its dependability in ODB II, fuel metering, ignition timing and impacts the overall engine performance, safety. The Dodge Caliber that came to the market in 2007 to 2012 is also remarkably safe with standard side airbags and optional curtain airbags; an Insurance Institute for Highway Safety with high ratings. Thus, the MAP Sensor is more advantageous in providing exact pressure without any negative value for the efficient and enhanced performance of the vehicle. However, the highlighted MAP Sensor is significant in the car market because it is suitable for various Caliber models; therefore, the functionality of a MAP sensor for various drivers is guaranteed. Being a reliable, efficient and safe part of the Dodge Caliber's system, the MAP Sensor is strategically valuable to anyone who owns a Dodge Caliber vehicle.

Dodge Caliber MAP Sensor Parts and Q&A

M.A.P. Sensor
5033310AB
Q: How to Service and Repair a MAP Sensor on Dodge Caliber?
A:
The Manifold Pressure/Vacuum Sensor should be serviced by first disconnecting the negative Battery Cable. After that, remove the connector from the MAP sensor. After that, unscrew the gauge that holds the MAP sensor and remove the sensor.
Map Sensor
5149056AA
Q: How to Install a MAP Sensor on Dodge Caliber?
A:
The first step is to attach the manifold absolute pressure (MAP) sensor to the Intake Manifold. After that, tighten the screw by hand to 4.5 Nm (40 in. lbs.). Following that, attach the electrical connector to the sensor and astride reconnect the negative Battery Cable.