How is the Knock Sensor Installed and Connected to the Cylinder Block and Battery on Dodge Caliber?

Behind the intake manifold, the knock sensor is bolted to the side of the cylinder block ahead of the starter. You should start by connecting the notable black electrical connector to the knock sensor. Then, mount the knock sensor and turn the bolt until the torque reaches 22 Nm (195 in. lbs.), since incorrect torque settings can hurt sensor performance and sparking. Next, link the cable positive to the car's negative post.

OEM Dodge Caliber Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
Dodge Caliber Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Caliber Knock Sensor

Choose OEM Knock Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Knock Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Caliber Knock Sensor is a crucial part that distinctively plays an incredible role toward the Dodge Caliber vehicles increased dependability and improved performance. This is a high-quality sensor that measures the knocks within the engine by converting into electrical signals, therefore helps the PCM to adjust the precise timing. Engines Management is especially important for achieving the optimal performance while using high quantities of low octane fuels as this capability assist in avoiding damage to the engine. The Dodge Caliber Knock Sensor is suitable for numerous Caliber models that were manufactured between 2007 and 2012, which means that car owners at the broad range will be able to notice an improvement in their car's performance. Besides, through pressure increase which reflects knock PRE sensor fulfils the necessary function of maintaining the Dodge Caliber's engines efficiency and safety ensuring longevity to the car. In this respect, improved forms of the Knock Sensor can control timings in specific cylinders as well as apply boost pressure in the automotive area. Thus, the compact-sized Dodge Caliber that boasts crash test results benefits from the application of the Knock Sensor that in turn reinforces the model's performance as well as the quality of the ride provided. By providing the consumers with standard side air bags and curtain air bags the Dodge Caliber has designed for safety while the Knock Sensor that underlines the general efficiency and performance of the Dodge Caliber are critical parts for every owner to consider.

Dodge Caliber Knock Sensor Parts and Q&A

Knock Sensor
5033316AB
Q: How is the Knock Sensor Installed and Connected to the Cylinder Block and Battery on Dodge Caliber?
A:
Behind the Intake Manifold, the knock sensor is bolted to the side of the cylinder block ahead of the starter. You should start by connecting the notable black electrical connector to the knock sensor. Then, mount the knock sensor and turn the bolt until the torque reaches 22 Nm (195 in. lbs.), since incorrect torque settings can hurt sensor performance and sparking. Next, link the cable positive to the car's negative post.