How to Install a Windshield Washer Fluid Reservoir on Dodge Caliber?

Attach the reservoir to the engine compartment just next to the right front wheel, with its post going into the hole in that horizontal extension. Attach and tighten the screw at the back of the reservoir neck onto the mounting tab on the front strut tower. Link the front and rear washer hoses to the reservoir hoses provided from the pump so they work as intended. Join the front and rear washer hoses to their respective reservoir washer hoses installed on the top of the right front strut tower and attach the headlamp and dash wire harness to the washer pump/motor unit. When reservoir removal involved the right front lamp unit on vehicles with the headlamp leveling system, reinstall the lamp afterward. If the diffusion sensor screw was taken out of its place on a diesel vehicle for servicing, put it back after following the proper steps. On a washer with a gasoline engine, place the coolant reserve container to the inboard side of the washer tank and fasten it. After the fluid is out, pour more washer fluid in the reservoir and connect the negative battery cable again.

OEM Dodge Caliber Windshield Washer Fluid Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Windshield Washer Fluid Reservoir found

View related parts
Dodge Caliber Washer Reservoir Part Number: 5189350AA
$96.80 MSRP: $145.00
You Save: $48.20 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir; Reservoir Windshield Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Caliber Windshield Washer Fluid Reservoir

Choose OEM Windshield Washer Fluid Reservoir that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Windshield Washer Fluid Reservoir follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Caliber Windshield Washer Fluid Reservoir Parts and Q&A

Washer Reservoir
5189350AA
Q:
How to Install a Windshield Washer Fluid Reservoir on Dodge Caliber?
A:
Attach the reservoir to the engine compartment just next to the right front wheel, with its post going into the hole in that horizontal extension. Attach and tighten the screw at the back of the reservoir neck onto the mounting tab on the front strut tower. Link the front and rear washer hoses to the reservoir hoses provided from the pump so they work as intended. Join the front and rear washer hoses to their respective reservoir washer hoses installed on the top of the right front strut tower and attach the headlamp and dash wire harness to the washer pump/motor unit. When reservoir removal involved the right front lamp unit on vehicles with the headlamp leveling system, reinstall the lamp afterward. If the diffusion sensor screw was taken out of its place on a diesel vehicle for servicing, put it back after following the proper steps. On a washer with a gasoline engine, place the coolant reserve container to the inboard side of the washer tank and fasten it. After the fluid is out, pour more washer fluid in the reservoir and connect the negative Battery Cable again.