How to Service and Repair a Front Wiper Arm on Dodge Caliber?

Initially, hold the front wiper arm over-center or at the bottom of the arc, to keep the wiping blade from pressing onto the glass and let the tension released from the connection to the pivot shaft. Place one end of a flathead screwdriver under the nut cap at the pivot and pry it up to remove it. After that, carefully remove the nut holding the wiper arm to the wiper pivot shaft. Removing the front wiper arm without a battery terminal puller is better, because the puller can damage important parts. Gently rock the wiper arm back and forth until it pulls from the front wiper arm pivot end.

What is the Correct Method to Install a Rear Wiper Arm on Dodge Caliber?

Before installing the rear wiper arm, turn on the ignition and set the rear wiper to OFF. If you can feel movement in the wiper motor output shaft, wait for it to stop and then switch the ignition for OFF. In the park position, the rear wiper arm has to be correctly indexed with the motor output shaft. Even out the driver's side of the windshield using your hand and then mount the wiper arm pivot on the output shaft so that the wiper blades touch the lowest bar of the rear defogger grid. Slide the tapered end of the wiper down over the bottom shaft while holding the wipers up with your hand. Fix and tighten the nut that holds the rear wiper arm to the rear wiper motor output shaft with a torque value of 9 Nm (7 ft. lbs.). Dampen the liftgate glass and work the rear wiper, then turn the rear wiper switch to OFF and examine whether the wipers are in the right position; readjust them as necessary. Finally, slide the small black plastic nut cap onto the nut at the end of the rear wiper arm.

OEM Dodge Caliber Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

View related parts
Dodge Caliber Wiper Arm, Front Passenger Side Part Number: 5183259AA
$63.30 MSRP: $80.25
You Save: $16.95 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Front Wiper; Windshield Wiper Arm, Right; Front Arm; Arm Front Wiper; Arm Wiper
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Wiper Arm, Rear Part Number: 5183275AB
$64.00 MSRP: $95.75
You Save: $31.75 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Rear Wiper; Back Glass Wiper Arm; Rear Arm; Arm Rear Wiper
- Position: Rear
- Replaces: 5183275AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Wiper Arm, Front Driver Side Part Number: 5183257AA
Product Specifications
- Other Name: Arm - Front Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Front Wiper; Arm Wiper
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Caliber Wiper Arm

Choose OEM Wiper Arm that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Wiper Arm follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge product under consideration, the Dodge Caliber Wiper Arm, is a part created to increase the visibility on the road owing to adverse weather conditions. In enhancing the operation of the wiper blades, the Dodge Caliber Wiper Arm has to connect the wiper blades to the motor, thus a clear windshield that enhances the conducting of the automobile. This reliability is important because as the motor rotates the Wiper Arm it applies force to it in the form of a sweeping motion to remove rain water, snow and any other debris. Being applicable to different variations of the Dodge Caliber non-soul produced in 2007-2012, the Wiper Arm remains essential for the vehicle's functionality. The Dodge Caliber itself is famous for its safety requirements, and IIHS awarded it favorable ratings, which stresses the importance of a good Wiper Arm to deliver safe conditions for drivers and passengers. For instance, the Dodge Caliber Wiper Arm appears as a hugely specialized and high-performance automobile part. More than improving the functionality of the wiper system, its design adds value to the driving experience due to the consideration that visibility should not be an issue whenever the car is on the road. This part is particularly striking in constructing the Dodge Caliber due to its efficacy in several Caliber models and it's effectively meets the strict quality and safety standards expected from the brand, which makes it a very important and functional part of the-Caliber.

Dodge Caliber Wiper Arm Parts and Q&A

Wiper Arm, Front Driver Side
5183257AA
Q: How to Service and Repair a Front Wiper Arm on Dodge Caliber?
A:
Initially, hold the front wiper arm over-center or at the bottom of the arc, to keep the wiping blade from pressing onto the glass and let the tension released from the connection to the pivot shaft. Place one end of a flathead screwdriver under the nut cap at the pivot and pry it up to remove it. After that, carefully remove the nut holding the wiper arm to the wiper pivot shaft. Removing the front wiper arm without a battery terminal puller is better, because the puller can damage important parts. Gently rock the wiper arm back and forth until it pulls from the front wiper arm pivot end.
Wiper Arm, Rear
5183275AB
Q: What is the Correct Method to Install a Rear Wiper Arm on Dodge Caliber?
A:
Before installing the rear wiper arm, turn on the ignition and set the rear wiper to OFF. If you can feel movement in the Wiper Motor output shaft, wait for it to stop and then switch the ignition for OFF. In the park position, the rear wiper arm has to be correctly indexed with the motor output shaft. Even out the driver's side of the windshield using your hand and then mount the wiper arm pivot on the output shaft so that the Wiper Blades touch the lowest bar of the rear defogger grid. Slide the tapered end of the wiper down over the bottom shaft while holding the wipers up with your hand. Fix and tighten the nut that holds the rear wiper arm to the rear wiper motor output shaft with a torque value of 9 Nm (7 ft. lbs.). Dampen the liftgate glass and work the rear wiper, then turn the rear Wiper Switch to OFF and examine whether the wipers are in the right position; readjust them as necessary. Finally, slide the small black plastic nut cap onto the nut at the end of the rear wiper arm.