How to Service and Repair a Camshaft Seal on Dodge Caravan?

Before servicing or fixing the camshaft oil seal, take off the timing belt. When removing the center bolt, grip each camshaft sprocket with Special Tool 6847. Remove the camshaft sprockets and the rear timing belt cover as the following step. Do not nick the camshaft seal or seal bore as you disconnect it with special tool A-C4679-A. Prior to installation, make sure the shaft seal surface is clean and free from sticky varnish, dirt or sharp nicks and then polish it if needed with 400 grit paper. Place the camshaft seals into the cylinder head using Special Tool MD-998306 until they are on the same level as the head. Install the rear cover of the timing belt and camshaft sprockets and use Special Tool 6847 to hold each sprocket while you tighten the center bolt to 101 Nm (75 ft. lbs.). Following this, years put the timing belt and front covers in place.

How to install a Camshaft Seal on Dodge Caravan?

Before installing the camshaft oil seal, make sure the shaft seal surface doesn't have any varnish, dirt or nicks and polish it with 400 grit paper if that's the case. Use Special Tool MD-998306 to seat the camshaft seals in the cylinder head until they reach flush with the head. Then, put on the rear timing belt cover, followed by the camshaft sprockets which have to be secured by Special Tool 6847 as you tighten the middle bolt to 101 Nm (75 ft. lbs.). After that, mount the timing belt and the aluminum covers in front.

OEM Dodge Caravan Camshaft Seal

Cam Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Camshaft Seals found

View related parts
Dodge Caravan Oil Seal Part Number: MD372536
$7.81 MSRP: $12.70
You Save: $4.89 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft; Multi-Purpose Seal; Camshaft Seal; Front Seal; Seal; Seal Camshaft
- Replaces: 1052A366, MD153103
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-2000 Dodge Caravan | Base, C/V, ES, LE, SE, Sport | 3.0L V6, 6 Cyl 3.0 L GAS
View related parts
Dodge Caravan Rear Seal Part Number: 4884111AA
$8.27 MSRP: $12.35
You Save: $4.08 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Camshaft Sensor; Engine Camshaft Position Sensor O-Ring; Engine Crankshaft Position Sensor Seal; Camshaft Seal; Camshaft Sensor Seal; Seal Camshaft Sensor; Engine Camshaft Position Sensor; Camshaft Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2007 Dodge Caravan | Base, ES, Ec, SE | 4 Cyl 2.4 L GAS
View related parts
Dodge Caravan Oil Seal Part Number: 4777086
$10.73 MSRP: $15.95
You Save: $5.22 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Camshaft; Engine Camshaft Seal; Camshaft Seal; Front Seal; Camshaft Front Oil, Order 5016733Aa Per Tsb 09-008-00.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2007 Dodge Caravan | Base, ES, Ec, SE | 4 Cyl 2.4 L GAS
View related parts
Dodge Caravan Oil Seal Part Number: 4105395
$9.34 MSRP: $11.84
You Save: $2.50 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Camshaft Front Oil; Timing Cover Gasket; Multi-Purpose Seal; Timing Cover Seal; Crankshaft Seal; Camshaft Seal; Front Crank Seal; Front Seal; Intermediate Shaft Seal; Camshaft Front Oil Seal; Oil Seal.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1995 Dodge Caravan | Base, C/V, ES, LE, SE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
View related parts
Dodge Caravan Rear Seal Part Number: 4343903
$14.57 MSRP: $18.75
You Save: $4.18 (23%)
ADD TO CART
Product Specifications
- Other Name: Plug - Camshaft - Rear; Camshaft Plug; Camshaft Seal; Rear Cam Plug; Seal, Camshaft Front Oil; Seal, Camshaft, Front; Seal, Camshaft Front
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1988-1995 Dodge Caravan | Base, C/V, ES, LE, SE | 4 Cyl 2.5 L GAS
View related parts
Dodge Caravan Camshaft Seal Part Number: MD180183
$5.42 MSRP: $17.20
You Save: $11.78 (69%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Cylinder Head Camshaft End; Rear Seal; Rear Cam Plug; Seal, Cylinder Head Cam End (Rubber)
- Replaces: MD090761
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-2000 Dodge Caravan | Base, C/V, ES, LE, SE, Sport | 6 Cyl 3.0 L GAS
View related parts
Dodge Caravan Cylinder Head Part Number: 4105396
Product Specifications
- Other Name: Seal; Rear Cam Plug; Seal, Camshaft Front (Timing Belt End); Seal, Camshaft Front Oil; Seal, Camshaft Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1985 Dodge Caravan | Base, LE, SE | 4 Cyl 2.2 L GAS

Dodge Caravan Camshaft Seal

Choose OEM Camshaft Seal that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Camshaft Seal follows strict manufacturing steps to lock in quality and fit. If your Dodge Caravan matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caravan parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

In Dodge Caravan used vehicles, the Camshaft Seal plays an important function of having to keep out dirt, oil, and other interferences from getting into the camshaft area which is the exit aperture of the cylinder head. This seal is very critical because it ensures that oil gets to the camshaft to enable smooth running of the engine without interferences. It is most probable that many Dodge Caravan models utilize different Camshaft Seal types or styles throughout the years, however, variations are unclear. The primary function remains consistent across these types: to protect the components of the engine not to come in contact with substances that are destructive while at the same time provide lubrication. The Camshaft Seal is therefore crucial and has great influence of the whole rolling Model of the Dodge Caravan especially with regard to the engine.

Dodge Caravan Camshaft Seal Parts and Q&A

Rear Seal
4884111AA
Q: How to Service and Repair a Camshaft Seal on Dodge Caravan?
A:
Before servicing or fixing the camshaft oil seal, take off the Timing Belt. When removing the center bolt, grip each camshaft sprocket with Special Tool 6847. Remove the camshaft sprockets and the rear timing belt cover as the following step. Do not nick the camshaft seal or seal bore as you disconnect it with special tool A-C4679-A. Prior to installation, make sure the shaft seal surface is clean and free from sticky varnish, dirt or sharp nicks and then polish it if needed with 400 grit paper. Place the camshaft seals into the cylinder head using Special Tool MD-998306 until they are on the same level as the head. Install the rear cover of the timing belt and camshaft sprockets and use Special Tool 6847 to hold each sprocket while you tighten the center bolt to 101 Nm (75 ft. lbs.). Following this, years put the timing belt and front covers in place.
Oil Seal
4777086
Q: How to install a Camshaft Seal on Dodge Caravan?
A:
Before installing the camshaft oil seal, make sure the shaft seal surface doesn't have any varnish, dirt or nicks and polish it with 400 grit paper if that's the case. Use Special Tool MD-998306 to seat the camshaft seals in the cylinder head until they reach flush with the head. Then, put on the rear Timing Belt cover, followed by the camshaft sprockets which have to be secured by Special Tool 6847 as you tighten the middle bolt to 101 Nm (75 ft. lbs.). After that, mount the timing belt and the aluminum covers in front.