How to Service and Repair an Ignition Coil for a 3.5L Engine on Dodge Challenger?

Reasons to change your ignition coil on the 3.5L engine include first disconnect and isolate negative battery cable. Remove upper intake manifold next. Remove the ignition coil mounting bolts, unlock and disengage the electrical connector from the ignition coils. Before removing the ignition coils, take a spray on the coils and spark plugs with compressed air to keep the dirt and debris from falling into the engine which could cause internal damage. Lastly, twist, lift and pull out the ignition coil from the engine.

How to Install an Ignition Coil on a 3.5L Engine on Dodge Challenger?

You should start by preparing the 3.5L engine by choosing the ignition coil and tightening its bolts to 8 Nm (71 in. lbs.) Once installed. Then, plug in the electrical connector and secure it with the lock. Following assembly, install the intake manifold. As the process concludes, connect the negative battery cable and tighten the nut by turning it 5 Nm (45 in. lbs.).

OEM Dodge Challenger Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Coils found

View related parts
Dodge Challenger Ignition Coil Part Number: 5149168AJ
$79.11 MSRP: $119.00
You Save: $39.89 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Assembly; Coil Ignition
- Replaces: 5149168AI, 5149168AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | GT, Rallye Redline, SE, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Challenger Ignition Coil Part Number: 68238603AA
$104.52 MSRP: $144.00
You Save: $39.48 (28%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Replaces: 56029129AA, 56029129AF, 56029129AB, 68060346AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Ignition Coil Part Number: 4606869AD
$83.46 MSRP: $116.00
You Save: $32.54 (29%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil
- Replaces: 4606869AC, 4606869AB, 4606869AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | SE | 3.5L V6, 6 Cyl 3.5 L GAS

Dodge Challenger Ignition Coil

Choose OEM Ignition Coil that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Ignition Coil follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

In Dodge Challenger automobiles the Ignition Coil plays a pivotal role of converting low voltage from the battery into high voltage required to burn fuel in the combustors. This change is critical when it comes to igniting the spark plugs to properly run the engine on the car. Old models of Dodge Challenger cars used conventional systems of sparking with mechanical contact breakers while new models have more modern systems which have one ignition coil per cylinder or per each pair of cylinders as this eliminates the use of ignition cables and distributors. Some of the ignition coils that may apply to Dodge Challenger automobiles might be Coil on plug and wasted spark. Wasted spark system employs one coil for two cylinders, and the sparks are fired simultaneously with one of the sparks considered a wastes, in modern ignition coils we have laminated iron cores and copper wire coils where energy is stored in magnetic fields for sparking purpose. Potential problems that arise from a faulty Ignition Coil include, high fuel consumption or poorly performing engine and this explains its importance in the performance of Dodge Challenger.

Dodge Challenger Ignition Coil Parts and Q&A

Ignition Coil
68238603AA
Q: How to Service and Repair an Ignition Coil for a 3.5L Engine on Dodge Challenger?
A:
Reasons to change your ignition coil on the 3.5L engine include first disconnect and isolate negative Battery Cable. Remove upper Intake Manifold next. Remove the ignition coil mounting bolts, unlock and disengage the electrical connector from the ignition coils. Before removing the ignition coils, take a spray on the coils and spark plugs with compressed air to keep the dirt and debris from falling into the engine which could cause internal damage. Lastly, twist, lift and pull out the ignition coil from the engine.
Ignition Coil
4606869AD
Q: How to Install an Ignition Coil on a 3.5L Engine on Dodge Challenger?
A:
You should start by preparing the 3.5L engine by choosing the ignition coil and tightening its bolts to 8 Nm (71 in. lbs.) Once installed. Then, plug in the electrical connector and secure it with the lock. Following assembly, install the Intake Manifold. As the process concludes, connect the negative Battery Cable and tighten the nut by turning it 5 Nm (45 in. lbs.).