How to Ensure Proper Installation and Alignment of an Oil Cooler on Dodge Challenger?

Line up the oil cooler with the fitting on the oil pan so you can remove every drop of oil and debris from the seal line before tightening, making sure the oval opening in the retainer flange is directly above the tab. Bolt the oil cooler in place with the attaching fastener and seal it to the recommended torque of 61 Nm. After that, place the new oil filter and fasten it by turning until it reaches 12 Nm or 106 in. lbs. Secure the coolant hoses to the oil cooler and ensure the whole system is filled with coolant.

OEM Dodge Challenger Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Coolers found

View related parts
Dodge Challenger Oil Cooler Part Number: 4892422AA
$63.20 MSRP: $128.00
You Save: $64.80 (51%)
ADD TO CART
Product Specifications
- Other Name: Cooler - Engine Oil; Cooler Engine Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | SE | 6 Cyl 3.5 L GAS
View related parts
Dodge Challenger Oil Cooler Part Number: 5181879AE
$313.84 MSRP: $463.00
You Save: $149.16 (33%)
ADD TO CART
Product Specifications
- Other Name: Cooler - Engine Oil; Engine Oil Cooler; Intercooler; Cooler Engine Oil
- Replaces: 5181879AB, 5181879AC, 5181879AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | R/T, R/T 392, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, T/A 392 Widebody | 6.2L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

Dodge Challenger Oil Cooler

Choose OEM Oil Cooler that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Oil Cooler follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Featured Article of Dodge Challenger Automobiles, "Oil Cooler," is imperative for regulating the Engine oil temperature and its viscosity especially when the automobile is exposed to high Stress such as Towing or High Performance driving. Usually implemented as oil-to-water coolers, these parts function as an enhancement to the vehicle's cooling system and play a role in controlling the temperature of the oil so that it would not seize. A factory cooler on the other hand may work appropriately under standard environmental situations, but extreme environments stress it, and thus may result in some components like the pipes clogging or leaking. Original equipment oil cooler kits can be replaced by parts to improve the engine life due to low oil temperature and protection of the cooling system impurities.

Dodge Challenger Oil Cooler Parts and Q&A

Oil Cooler
4892422AA
Q: How to Ensure Proper Installation and Alignment of an Oil Cooler on Dodge Challenger?
A:
Line up the oil cooler with the fitting on the Oil Pan so you can remove every drop of oil and debris from the seal line before tightening, making sure the oval opening in the retainer flange is directly above the tab. Bolt the oil cooler in place with the attaching fastener and seal it to the recommended torque of 61 Nm. After that, place the new Oil Filter and fasten it by turning until it reaches 12 Nm or 106 in. lbs. Secure the coolant hoses to the oil cooler and ensure the whole system is filled with coolant.