How to Maintain and Fix an Ashtray on Dodge Charger?

First, remove and disconnect the negative battery cable to handle and fix the ash tray. After that, remove the gear shift center bezel from the location in the center console. Pull up the emergency brake and put the gear shift in the Low position. Unlock the ash receiver from its spot on the instrument panel by removing the snap retainers with a trim stick C-4755 or equivalent. When you have wires, release the wiring connectors from the heated seat switches and pull out the switches as necessary. After that, pull out the wire harness connector from the lighter and remove the lighter assembly if that is required. Remove the ash receiver from the automobile in the last step.

How to Install an Ashtray on Dodge Charger?

If you have removed and can install the heated seat switches, do that and link wire harness connectors 2 to them in the ash receiver. Then, after removing the assembly, set it into the ash receiver and install connector 3 from the wire harness into the lighter. After that, attach receiver assembly 1 into the instrument panel by gently pushing the housing into place until the sound goes off on the snap retainers. Afterward, place the gear shift center bezel onto the floor console 4. Push the gear shift lever to Park and take off the emergency brake. Finally, connect the negative battery cable once again.

OEM Dodge Charger Ashtray

Cigarette Ashtray

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Ashtrays found

View related parts
Dodge Charger Lighter Assembly, Rear Part Number: 5108052AA
$60.73 MSRP: $89.35
You Save: $28.62 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Receiver - Floor Console; Cigarette Lighter Element; Instrument Panel Ashtray; Center Ash Tray; Rear Ash Tray.; Ashtray Assembly; Includes Ash Receiver, Knob, Element, and Lighter. Smokers Package.
- Position: Rear
- Replaces: 4678831AB, JU27XDV, RS79ZJ3AA, RS79WL5AA, JU27WL8, JU27ZJ3, JU271DB, RS79BD5AA, RS79XDVAA, JU27YQL, JU27ZP7, JU27WL5, RS79YQLAA, JU27BD1, JU27DK5, JU27HD5, 4595833AB, 4595823AA, 4595823AB, JU27BD5, JU27JX8, JU27LAZ, JU271D1, JU27XT5, JU27XTM, JU27SJK, JU27VK9, JU271DD, RS79BD1AA, JU27SC3, JU27SK5, JU271P1, RS79XT5AA, RS79DK5AA, JU27MF1
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger
- 2006-2007 Dodge Charger | 2.7L V6, 3.5L V6, 5.7L V8
View related parts
Dodge Charger Ashtray Part Number: XB12DX9AC
Product Specifications
- Other Name: Receiver; Instrument Panel Ashtray; Ash Receiver
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Charger | Base, Pursuit, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Ashtray Part Number: 1FU98DX9AB
Product Specifications
- Other Name: Receiver - Instrument Panel; Instrument Panel Ashtray; Ash Receiver Instrument Panel
- Replaces: 1FU981DVAB, 1FU981DBAB, 68041497AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Charger | Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Ashtray Part Number: 4595956AE
Product Specifications
- Other Name: Receiver; Instrument Panel Ashtray
- Replaces: 4595956AB, 4595956AC, 4595956AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Charger | Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Ashtray Part Number: XB13DX9AC
Product Specifications
- Other Name: Receiver; Instrument Panel Ashtray; Ash Receiver
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Charger | Base, Pursuit, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Ashtray Part Number: 4595957AE
Product Specifications
- Other Name: Receiver; Instrument Panel Ashtray; Ash Receiver
- Replaces: 4595957AC, 4595957AB, 4595957AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Charger | Daytona R/T, R/T, SRT8 | 2.7L V6, 3.5L V6, 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Ashtray Part Number: WX59DX9AF
Product Specifications
- Other Name: Receiver; Instrument Panel Ashtray
- Replaces: WX59DX9AC, WX59DX9AD, WX59DX9AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Charger | Base, Pursuit, SE, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS

Dodge Charger Ashtray

Choose OEM Ashtray that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Ashtray follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Charger Ashtray Parts and Q&A

Lighter Assembly, Rear
5108052AA
Q: How to Maintain and Fix an Ashtray on Dodge Charger?
A:
First, remove and disconnect the negative Battery Cable to handle and fix the ash tray. After that, remove the gear shift center bezel from the location in the center console. Pull up the emergency brake and put the gear shift in the Low position. Unlock the ash receiver from its spot on the instrument panel by removing the snap retainers with a trim stick C-4755 or equivalent. When you have wires, release the wiring connectors from the heated seat switches and pull out the switches as necessary. After that, pull out the wire harness connector from the lighter and remove the lighter assembly if that is required. Remove the ash receiver from the automobile in the last step.
Ashtray
4595956AE
Q: How to Install an Ashtray on Dodge Charger?
A:
If you have removed and can install the heated seat switches, do that and link wire harness connectors 2 to them in the ash receiver. Then, after removing the assembly, set it into the ash receiver and install connector 3 from the wire harness into the lighter. After that, attach receiver assembly 1 into the instrument panel by gently pushing the housing into place until the sound goes off on the snap retainers. Afterward, place the gear shift center bezel onto the floor console 4. Push the gear shift lever to Park and take off the emergency brake. Finally, connect the negative Battery Cable once again.