How to Maintain an Ashtray on Dodge Dakota?

Before you can service the ash tray, cut off the air bag system by detaching the ground battery cable and wait for two minutes so the air bag system capacitor can discharge. Remove the ash receiver and housing unit below the instrument panel. Spread the ash receiver housing to pull the guide/stop pins out of the housing slots in the ash receiver door. Various hinges on the bottom of the ash receiver door need to be unsnapped from the matching pins that are in the housing. Lift the blunt end of a prying tool upward on the push/push latch lever from the top of the housing, then slide the push/push latch lever guide tang out of the keyed part of the slot inside the housing. Pull out the push/push latch lever guide and fit the guide tang into the stop end of the guide slot, align the pivot pin with the pivot hole and press down firmly until you hear it snap. Cutl the hinges of the bottom door onto the hinge pins as you snap them into place. Before spreading the housing, first fit the push/push latch spring's free end into the slotted hole in the housing. After that, test the push/push latch and carefully slide the ash receiver into place on the bottom of the instrument panel.

OEM Dodge Dakota Ashtray

Cigarette Ashtray

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Ashtrays found

View related parts
Dodge Dakota Ashtray, Gray Part Number: 5EM36RC8AB
Product Specifications
- Other Name: Instrument Panel Ashtray
- Replaces: 5EM361C8AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Dakota | Base, R/T, SLT, Sport | 2.5L L4, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Ashtray Part Number: 82207485
Product Specifications
- Other Name: Smoke Kit - Ash Receiver With Lighter; Instrument Panel Ashtray; Smokers Kit Ash Receiver With Lighter
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Dakota | Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Ashtray Part Number: 82207126
Product Specifications
- Other Name: Smoke Kit - Ash Receiver With Lighter; Instrument Panel Ashtray; Smokers Kit Ash Receiver With Lighter
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Dakota | Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Ashtray Part Number: 5EM36LAZAB
Product Specifications
- Other Name: Instrument Panel Ashtray
- Replaces: 5EM361AZAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Dakota | Base, R/T, SLT, Sport | 2.5L L4, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Ashtray Part Number: 5EM361K9AB
Product Specifications
- Other Name: Instrument Panel Ashtray; Ash Receiver
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Ashtray Part Number: UJ56XDVAA
Product Specifications
- Other Name: Ashtray - Instrument Panel; Instrument Panel Ashtray
- Replaces: UJ561DVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Dakota | Base, R/T, SLT, SXT, Sport | 2.5L L4, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Ashtray, Brown Part Number: UJ56WL8AA
Product Specifications
- Other Name: Ashtray - Instrument Panel; Instrument Panel Ashtray
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Dakota | Base, R/T, SLT, SXT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

Dodge Dakota Ashtray

Choose OEM Ashtray that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Ashtray follows strict manufacturing steps to lock in quality and fit. If your Dodge Dakota matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Dakota parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Dakota Ashtray Parts and Q&A

Ashtray, Brown
UJ56WL8AA
Q: How to Maintain an Ashtray on Dodge Dakota?
A:
Before you can service the ash tray, cut off the air bag system by detaching the ground Battery Cable and wait for two minutes so the air bag system capacitor can discharge. Remove the ash receiver and housing unit below the instrument panel. Spread the ash receiver housing to pull the guide/stop pins out of the housing slots in the ash receiver door. Various hinges on the bottom of the ash receiver door need to be unsnapped from the matching pins that are in the housing. Lift the blunt end of a prying tool upward on the push/push latch lever from the top of the housing, then slide the push/push latch lever guide tang out of the keyed part of the slot inside the housing. Pull out the push/push latch lever guide and fit the guide tang into the stop end of the guide slot, align the pivot pin with the pivot hole and press down firmly until you hear it snap. Cutl the hinges of the bottom door onto the hinge pins as you snap them into place. Before spreading the housing, first fit the push/push latch spring's free end into the slotted hole in the housing. After that, test the push/push latch and carefully slide the ash receiver into place on the bottom of the instrument panel.