OEM Dodge Dakota Pilot Bearing

Dodge Dakota Pilot Bearing Parts and Q&A

• Pilot Bearing
  53009178AB
  Q: How to service a pilot bearing on Dodge Dakota?

  A:

  Service the pilot bearing by first taking off the transmission, the transfer case if necessary and the clutch housing. After that, remove the clutch cover and disc. Eliminate the pilot bearing by using a blind hole puller that is right for the job. When installing bearings, apply solvent to clean the bearing bore and remove it by drying with a clean towel. Straighten the bearing while installing it with a clutch alignment tool to avoid it becoming cocked. Push the bearing into its hole until its edge is at the same level as the hole's edge and there is no indent. When ready, install the clutch cover and disc, after that securing the clutch housing, transmission and transfer case if you have it.
• Pilot Bearing
  53009180AB
  Q: How to install a pilot bearing on Dodge Dakota?

  A:

  You should clean the bearing bore with solvent and let it dry with a shop towel before putting in the pilot bearing. Install the new bearing (1) by using a clutch alignment tool while making sure it doesn't get cocked in the process. Position the bearing so it is level with the edge of the bearing bore, making sure it isn't pushed inside. The letter must be turned toward the transmission. When the bearing is in place, attach the clutch cover, disc and clutch housing and add the transmission and transfer case if needed.