It is necessary to read all the warnings and cautions before removing the steering column cover. Separate each section retaining clip with a trim stick C-4755 or something similar, then remove the end cap. Pull the park brake release handle, let go of the clip and remove the release rod. Take out the two screws. Again, with a trim stick C-4755 or an equivalent, pull out the upper retaining clips and remove the cover of the opening. Push the side tabs to pull the diagnostic connector from the opening cover reinforcement. Loosen the screws and take out the hood release handle from the part joining the hood to the reinforcement. Also, take out the two screws from the sides and split the upper retaining clips with a trim stick C-4755 or equivalent, removing the opening cover reinforcement in the process.