How to Replace a Cigarette Lighter Outlet on Dodge Durango?

Before you replace the cigarette lighter, unplug the negative battery cable. Unfold the liftgate and lift the left rear cup holder off the trim above it to get to the back of the rear power outlet. Check the base of the power outlet receptor to discover where the rectangular bosses are attached to the D-pillar trim. Use some external snap ring pliers to connect to the round parts on the mount, squeeze down on them and slowly pull out the rest of the mount with the pliers. Sometimes, pressing from behind the power outlet can assist you when pulling the base off. Once you've removed the D-pillar, pull out the power outlet mount from that area. Once you finish the wiring, place the mount into the D-pillar trim, putting the twists on the outside of the mechanism together with those found in the opening in the mount. Press the receptacle base down until the retaining bosses lock in place. First, fit the protective cap into the outlet base, then assemble the cup holder inside the panel on the back of the seat and finally attach the negative cable on the battery.

How to Service the Cigarette Lighter Power Outlet on Dodge Durango?

Before working with the auxiliary cigarette lighter, first cut off and move the battery negative cable. Take out the cigarette lighter knob and item from the bottom part of the cigarette lighter or detach the safety cap from the cigarette lighter receptacle base. Look inside the receptacle base to find where the rectangular retaining bosses are holding it in place. Put the outside snap ring pliers around the retaining bosses and give them a squeeze to remove the bosses and once this is done rock the pliers to gently pull the receptacle base from the mount. Take out the receptacle base from the dashboard and disconnect the wire harness from the other end. Take out the instrument panel mount. Put the mount into the instrument panel, matching the splines on the receptacle base connector with the grooves on the mount. Fully push down until the retaining bosses engage completely. After that, attach the lighter knob or cap to the device and put back on the negative cable from the battery.

OEM Dodge Durango Cigarette Lighter

Car Cigarette Lighter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Cigarette Lighters found

View related parts
Dodge Durango Power Outlet, Front Part Number: 4685536
$27.72 MSRP: $40.15
You Save: $12.43 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lighter - Cigar Lighter; 12 Volt Accessory Power Outlet, Center; Cigarette Lighter Element, Front.; Lighter Assembly; Knob & Element for Cigar Lighter; Cigarette Lighter.
- Position: Front
- Replaces: 4685536AB, 5ZN46DX9AA, 5ZN46LXHAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Dodge Durango | Base, SLT | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Power Outlet, Center Part Number: 4793554AC
$24.35 MSRP: $36.05
You Save: $11.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lighter; 12 Volt Accessory Power Outlets: Rear Right, Rear Left, Center, Front, Rear; Housing; Cigarette Lighter Socket.; Power Outlet Mount; Armrest Outlet; Power Outlet Cigar; Power Outlet Power
- Position: Center
- Replaces: 4793554AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango
- 2002-2009 Dodge Durango | 3.7L V6, 4.7L V8, 5.7L V8, 5.9L V8
View related parts
Dodge Durango Element Base, Front Part Number: 4793551
$25.31 MSRP: $37.40
You Save: $12.09 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lighter - Cigar Lighter; 12 Volt Accessory Power Outlet, Front; Lighter Base; Base; Lighter; Receiver; Base Cigar Lighter
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Durango | Base, R/T, SLT, SLT Plus, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Power Outlet, Front Part Number: 4685590
$26.67 MSRP: $39.45
You Save: $12.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Outlet; 12 Volt Accessory Power Outlet Housing, Front; Center; Cigarette Lighter Socket.; Lighter Socket; Power Outlet Base; Cigar Lighter Base; Serviced Without Cap.
- Position: Front
- Replaces: 4685590AB, 5026362AA, 6AL38DX9AA, 6AL38LXHAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005, 1998 Dodge Durango | Base, Limited, R/T, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Lighter Assembly, Front Part Number: 4685370
$18.22 MSRP: $39.35
You Save: $21.13 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lighter - Cigar Lighter; Cigarette Lighter Element, Center, Front; Element; Lighter; Knob And Element Cigar Lighter; Cigarette Lighter
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Power Outlet Part Number: 68476797AB
$18.70 MSRP: $25.65
You Save: $6.95 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Outlet, Auxiliary Outlet, Center Console; Auxiliary Outlet; Front Power Outlet; Rear Power Outlet; Lighter
- Position: Front
- Replaces: 56046637AA, 68476797AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
- 2011 Dodge Durango | 3.6L V6, 5.7L V8

Dodge Durango Cigarette Lighter

Choose OEM Cigarette Lighter that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Cigarette Lighter follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Truly, the Dodge Durango Cigarette Lighter is a clear demonstration of performing features that most Dodge cars have and which plays a critical role in boosting productivity along with safety of the Durango. Although developed primarily for use in lighting cigarettes, the contemporary Dodge Durango Cigarette Lighter has transformed into a more multifunctional power supply for almost any device, considering modern consumers' requirements. Acceptable by various Durango models, this Cigarette Lighter, in addition to the increased convenience, also corresponds to the car interior design and allows drivers and passengers to use power for devices in a convenient way. As for the features, the most important among them are the high-ranking technological ones, for instance, the V-Coil system that enables the automatic removal of the Dodge Durango Cigarette Lighter. This innovation elaborates Dodge's devotion to improving the pleasure of driving a car while not neglecting security measures. This is where the Cigarette Lighter plays a vital role in today's car; being an electrical item with added value as a cigarette lighter. Talking about the importance and prospects of this product, it can be stated that the many strong characteristics of the Dodge Durango Cigarette Lighter are aimed directly at meeting the needs of the car owners, so it is difficult to overestimate the importance of its presence on the market. In a general sense, the Dodge Durango Cigarette Lighter is a perfect example of how the company has doubled its efforts to produce high-quality, reliable products and put in constant innovation; this is why any Durango won't let go the chance to equip his or her ride with this excellent add-on.

Dodge Durango Cigarette Lighter Parts and Q&A

Lighter Assembly, Front
4685370
Q: How to Replace a Cigarette Lighter Outlet on Dodge Durango?
A:
Before you replace the cigarette lighter, unplug the negative battery cable. Unfold the liftgate and lift the left rear cup holder off the trim above it to get to the back of the rear power outlet. Check the base of the power outlet receptor to discover where the rectangular bosses are attached to the D-pillar trim. Use some external snap ring pliers to connect to the round parts on the mount, squeeze down on them and slowly pull out the rest of the mount with the pliers. Sometimes, pressing from behind the power outlet can assist you when pulling the base off. Once you've removed the D-pillar, pull out the power outlet mount from that area. Once you finish the wiring, place the mount into the D-pillar trim, putting the twists on the outside of the mechanism together with those found in the opening in the mount. Press the receptacle base down until the retaining bosses lock in place. First, fit the protective cap into the outlet base, then assemble the cup holder inside the panel on the back of the seat and finally attach the negative cable on the battery.
Power Outlet, Front
4685590
Q: How to Service the Cigarette Lighter Power Outlet on Dodge Durango?
A:
Before working with the auxiliary cigarette lighter, first cut off and move the battery negative cable. Take out the cigarette lighter knob and item from the bottom part of the cigarette lighter or detach the safety cap from the cigarette lighter receptacle base. Look inside the receptacle base to find where the rectangular retaining bosses are holding it in place. Put the outside snap ring pliers around the retaining bosses and give them a squeeze to remove the bosses and once this is done rock the pliers to gently pull the receptacle base from the mount. Take out the receptacle base from the dashboard and disconnect the wire harness from the other end. Take out the instrument panel mount. Put the mount into the instrument panel, matching the splines on the receptacle base connector with the grooves on the mount. Fully push down until the retaining bosses engage completely. After that, attach the lighter knob or cap to the device and put back on the negative cable from the battery.