How to Install a Fan Clutch for Your Radiator on Dodge Durango?

Make sure to connect the fan blade assembly to the viscous fan drive and then tighten the bolts until you reach 23 Nm (17 ft. lbs.) After that, put the fan blade/viscous fan drive assembly into the radiator shroud and then install both the shroud and assembly into the car. Retain the fan shroud by screwing them in with a torque of 6 Nm (50 lbs. in.). Put the fan blade/viscous fan drive assembly onto the water pump shaft, tighten the mounting nut to 50 Nm (37 ft. lbs.) with Tool 6958 and then proceed to the next step. After that, fit the upper radiator hose, fill the coolant reservoir and return the battery negative cable to its place.

How to Effectively Service and Repair a Fan Clutch on Dodge Durango?

Before handling the fan clutch, first remove the battery's negative cable. The thermal viscous fan drive/fan blade assembly is joined to the water pump hub shaft; take it off by turning the mounting nut counterclockwise from the front using a Snap-On 36 MM Fan Wrench number SP346 and a Special Tool 6958 Spanner Wrench with adapter pins 8346 to secure the pulley from turning. Do not take off the fan and viscous fan drive unit from the vehicle or free up the fan blade from the viscous fans at the moment. After that, unscrew the shroud hardware and remove both the upward-mounted fan shroud and the fan/viscous fan drive from the car. After the fan drive's removal, make sure it is not in a horizontal spot so the silicone fluid does not drain and dirt the lubrication inside. Take out the four bolts that hold the fan blade assembly onto the viscous fan drive. To put in the fan, first attach the fan blade to the viscous fan drive and tighten the bolts to 23 Nm (17 ft. lbs.) torque. Install the fan blade/viscous fan drive assembly with the upper shroud onto the car, secure the shroud with retaining screws and join the fan blade/drive assembly to the water pump shaft. Then, reattach the battery negative cable to the power distribution point.

OEM Dodge Durango Fan Clutch

Cooling Fan Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Fan Clutches found

View related parts
Dodge Durango Fan Clutch Part Number: 52029084AA
$197.65 MSRP: $296.00
You Save: $98.35 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Drive Fan
- Replaces: 52028799AA, 52028799AB, 52028799AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 3.9L V6, 4.7L V8, 5.2L V8, 5.9L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Fan Clutch Part Number: 52028994AC
$168.82 MSRP: $249.00
You Save: $80.18 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Drive Fan
- Replaces: 52028994AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer, Limited, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Fan Clutch Part Number: 52029085AA
$128.86 MSRP: $172.00
You Save: $43.14 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Drive Fan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003 Dodge Durango | R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Fan Clutch Part Number: 52029275AD
$127.28 MSRP: $161.35
You Save: $34.07 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Drive Fan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Durango | Base, SLT, SLT Plus | 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Fan Clutch Part Number: 52028995AA
$307.71 MSRP: $405.00
You Save: $97.29 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Drive Fan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer, Limited, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Fan Clutch Part Number: 52029152AB
Product Specifications
- Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Drive Fan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Durango | Base, SLT, SLT Plus | 6 Cyl 3.9 L GAS
View related parts
Dodge Durango Fan Clutch Part Number: 52028940AB
Product Specifications
- Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Drive Fan
- Replaces: 52028940AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Fan Clutch Part Number: 55056946AA
Product Specifications
- Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Drive Fan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Durango | Limited, SLT | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Fan Clutch Part Number: 52029767AA
Product Specifications
- Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Drive Fan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Durango | Base, SLT, SLT Plus | 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Fan Clutch Part Number: 52029276AD
Product Specifications
- Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Drive Fan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Durango | Base, SLT, SLT Plus | 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Fan Clutch Part Number: 52028944AB
Product Specifications
- Other Name: Clutch; Engine Cooling Fan Clutch; Drive Fan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Durango | Base, SLT, SLT Plus | 6 Cyl 3.9 L GAS
View related parts
Dodge Durango Fan Clutch Part Number: 52028992AC
Product Specifications
- Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Drive Fan
- Replaces: 52028992AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer, Limited, SE, SLT, ST, SXT | 8 Cyl 5.7 L GAS

Dodge Durango Fan Clutch

Choose OEM Fan Clutch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fan Clutch follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Fan Clutch is an important part that defines reliability and power in the Dodge Durango series. This critical part controls the speed of the cooling fan, and thus the temperature of the engine, and in turn increases the general efficiency of the engine cooling. Hence, through controlling the fan speed dependent of the real-time engine parameters, the Fan Clutch has the direct responsibility in enhancing fuel economy as well as safety while in operation. Suits Durango models, R/T and GT, etc the Fan Clutch is usually embedded in the water pump pulley and run by crankshaft within engine; compatibility and efficient cooling facilitated. The Fan Clutch comes in various types including the viscous couplings and the electronically controlled clutches, which are more adjustable and hence give better results when adjusted. This adaptability for one adds to Durango's efficiency and for the other, it gives a better handling to the vehicle. The Fan Clutch is therefore dependable feature of the Dodge Durango boosting its durability consequently making it a standout vehicle in the market. Due to its capacity to keep the engine of the vehicle within the right temperatures and enhancing the general operating of a vehicle, the Fan Clutch is a display of great work and dedication of the company in the production of Dodge Durango's vehicles, providing safety and fun for individuals who drive Dodge Durango.

Dodge Durango Fan Clutch Parts and Q&A

Fan Clutch
52028994AC
Q: How to Install a Fan Clutch for Your Radiator on Dodge Durango?
A:
Make sure to connect the Fan Blade assembly to the viscous fan drive and then tighten the bolts until you reach 23 Nm (17 ft. lbs.) After that, put the fan blade/viscous fan drive assembly into the radiator shroud and then install both the shroud and assembly into the car. Retain the fan shroud by screwing them in with a torque of 6 Nm (50 lbs. in.). Put the fan blade/viscous fan drive assembly onto the water pump shaft, tighten the mounting nut to 50 Nm (37 ft. lbs.) with Tool 6958 and then proceed to the next step. After that, fit the upper radiator hose, fill the coolant reservoir and return the battery negative cable to its place.
Fan Clutch
52029084AA
Q: How to Effectively Service and Repair a Fan Clutch on Dodge Durango?
A:
Before handling the fan clutch, first remove the battery's negative cable. The thermal viscous fan drive/Fan Blade assembly is joined to the water pump hub shaft; take it off by turning the mounting nut counterclockwise from the front using a Snap-On 36 MM Fan Wrench number SP346 and a Special Tool 6958 Spanner Wrench with adapter pins 8346 to secure the pulley from turning. Do not take off the fan and viscous fan drive unit from the vehicle or free up the fan blade from the viscous fans at the moment. After that, unscrew the shroud hardware and remove both the upward-mounted fan shroud and the fan/viscous fan drive from the car. After the fan drive's removal, make sure it is not in a horizontal spot so the silicone fluid does not drain and dirt the lubrication inside. Take out the four bolts that hold the fan blade assembly onto the viscous fan drive. To put in the fan, first attach the fan blade to the viscous fan drive and tighten the bolts to 23 Nm (17 ft. lbs.) torque. Install the fan blade/viscous fan drive assembly with the upper shroud onto the car, secure the shroud with retaining screws and join the fan blade/drive assembly to the water pump shaft. Then, reattach the battery negative cable to the power distribution point.