How to Install an Ignition Coil for a 3.7L Engine on Dodge Durango?

Prior to installing the ignition coil, aim compressed air toward the top of the spark plug to reduce the amount of dirt in the area. Check and clean rubber boot 4 before applying Mopar(R) Dielectric Grease # J8126688 between rubber boot 4 and spark plug 5 on top of the spark plug. Position coil assembly 1 into the cylinder head opening and turn it to place it onto the spark plug. Place the coil mounting bolt in place and tighten it to 8 Nm (70 in.lbs). Click the electrical connector onto the ignition coil assembly 1, then attach the spark plug wires 3 Reinstall the throttle body air intake tube or the intake air box if they become necessary.

How to Remove an Individual Ignition Coil on Dodge Durango?

A separate ignition coil is used with every spark plug, installed within cylinder head holes and held in place by a mounting screw at the top of the manifold. On the lowest part of the coil sits a rubber boot covering the spark plug, pressed down by a permanent mechanical spring. The coil at the cylinder head opening is sealed by an o-ring. Sometimes, the throttle body air intake tube or intake box must be taken out to access the coil. The first step is to push the release lock down and pull the electrical connector away from the coil. At the base of the coil, use compressed air to clean before removing and afterwards, remove the nut on the mounting stud that holds the coil. Next, gently remove the coil at the head end after turning it ever-so-slightly and take it from your vehicle.

OEM Dodge Durango Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Ignition Coils found

View related parts
Dodge Durango Ignition Coil Part Number: 56028394AD
$67.74 MSRP: $102.00
You Save: $34.26 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Replaces: 56028394AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Dodge Durango | Limited, SLT, ST | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Ignition Coil Part Number: 56028172AC
$74.65 MSRP: $115.00
You Save: $40.35 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil
- Replaces: 56028172AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Ignition Coil Part Number: 56028138AF
$83.96 MSRP: $126.00
You Save: $42.04 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Ignition Coil Set; Coil Ignition
- Replaces: 56028138AD, 56028138AB, 56028138AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2008 Dodge Durango | Adventurer, Base, Limited, SLT, SLT Plus, ST, SXT, Sport | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Ignition Coil Part Number: 5149049AB
$86.41 MSRP: $130.00
You Save: $43.59 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Durango | Adventurer, Limited, SE, SLT, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Ignition Coil Part Number: 68320417AA
$83.51 MSRP: $125.00
You Save: $41.49 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil
- Replaces: 5149199AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Durango | SE, SLT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Durango Ignition Coil Part Number: 5149168AJ
$79.11 MSRP: $119.00
You Save: $39.89 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Assembly; Coil Ignition
- Replaces: 5149168AI, 5149168AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Dodge Durango | Citadel, Crew, Express, Heat, Limited, Rallye, SXT, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Durango Ignition Coil Part Number: 68223569AD
$84.12 MSRP: $121.00
You Save: $36.88 (31%)
ADD TO CART
Product Specifications
- Other Name: Coil - Ignition; Direct Ignition Coil; Coil Assembly; Coil Ignition
- Replaces: 68223569AB, 68223569AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, SXT, SXT Plus, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Durango Ignition Coil Part Number: 68238603AA
$104.52 MSRP: $144.00
You Save: $39.48 (28%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Replaces: 56029129AA, 56029129AF, 56029129AB, 68060346AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | 5.7L V8
- 2006-2009 Dodge Durango | 5.7L V8
View related parts
Dodge Durango Ignition Coil Part Number: 56028138BA
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil On Plug Coil; Ignition Coil Set; Coil Ignition
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Durango | SLT, SXT | 6 Cyl 3.7 L GAS

Dodge Durango Ignition Coil

Choose OEM Ignition Coil that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Ignition Coil follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

How it works Although similar to an old-fashioned transformer in construction, the Ignition Coil in Dodge Durango is somewhat different in that it is solely responsible for transforming low voltage electricity, gotten from the battery, to high voltage electricity, needful for sparking the air-fuel mixture in the combustion chambers of the car engine. This process makes combustion to be effective thus making the vehicle to run well. Dodge Durango models have gone through different types of ignitions with the latest one using electronic and power transistors to improve on their performance. Dodge Durango over the years have used different ignition coils, these are the, Coil on plug and wasted spark igniter. The coil-on-plug design does not require the use of high-tension leads, while wasted spark uses one coil for two cylinders, and sparks at the same time. These are some of the developments in Ignition Coil that help in increasing engine performance and decreasing misfiring problem hence it becomes important that Ignition Coil is checked frequently.

Dodge Durango Ignition Coil Parts and Q&A

Ignition Coil
68320417AA
Q: How to Install an Ignition Coil for a 3.7L Engine on Dodge Durango?
A:
Prior to installing the ignition coil, aim compressed air toward the top of the spark plug to reduce the amount of dirt in the area. Check and clean rubber boot 4 before applying Mopar(R) Dielectric Grease # J8126688 between rubber boot 4 and spark plug 5 on top of the spark plug. Position coil assembly 1 into the cylinder head opening and turn it to place it onto the spark plug. Place the coil mounting bolt in place and tighten it to 8 Nm (70 in.lbs). Click the electrical connector onto the ignition coil assembly 1, then attach the spark plug wires 3 Reinstall the throttle body air intake tube or the intake air box if they become necessary.
Ignition Coil
5149049AB
Q: How to Remove an Individual Ignition Coil on Dodge Durango?
A:
A separate ignition coil is used with every spark plug, installed within cylinder head holes and held in place by a mounting screw at the top of the manifold. On the lowest part of the coil sits a rubber boot covering the spark plug, pressed down by a permanent mechanical spring. The coil at the cylinder head opening is sealed by an o-ring. Sometimes, the throttle body air intake tube or intake box must be taken out to access the coil. The first step is to push the release lock down and pull the electrical connector away from the coil. At the base of the coil, use compressed air to clean before removing and afterwards, remove the nut on the mounting stud that holds the coil. Next, gently remove the coil at the head end after turning it ever-so-slightly and take it from your vehicle.