How to Service and Repair a Liftgate Hinge on Dodge Durango?

Before working on the trunk or liftgate hinge, take off the liftgate upper trim as well as the D-pillar trim. Fold the liftgate back against the roof with a lifting device and mark the hinge spots on both parts using a wax crayon or an equivalent. After that, take out the liftgate support cylinder and the screws connecting the liftgate hinge to the frame. With care, lift down the headliner to get to the bolts at the liftgate hinge and then pull out the hinge. If desired, paint the newly purchased hinge before you attach it to the door. Tilt up the liftgate, line up the hinge with the marks you made and attach the bolts to make sure the hinge is hooked onto the liftgate. Be sure to slide a bead of 3M-Drip Check Sealant over the hinge bolt threads. Put the hinge where the marks are on the roof and use bolts to secure it to the panel. Attach the support cylinder under the liftgate, lift halfway out the support, then reset the D-pillar trim and liftgate trim in place.

OEM Dodge Durango Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Liftgate Hinges found

View related parts
Dodge Durango Hinge, Rear Part Number: 68299174AA
$49.99 MSRP: $101.00
You Save: $51.01 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear
- Replaces: 55113709AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Hinge, Rear Part Number: 4589059AD
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear
- Replaces: 4589059AA, 4589059AB, 55257015AF, 55257015AC, 4589059AC, 55257015AD, 55257015AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2009 Dodge Durango | Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

Dodge Durango Liftgate Hinge

Choose OEM Liftgate Hinge that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Liftgate Hinge follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Durango Liftgate Hinge Parts and Q&A

Hinge, Rear
4589059AD
Q: How to Service and Repair a Liftgate Hinge on Dodge Durango?
A:
Before working on the trunk or liftgate hinge, take off the liftgate upper trim as well as the D-pillar trim. Fold the liftgate back against the roof with a lifting device and mark the hinge spots on both parts using a wax crayon or an equivalent. After that, take out the liftgate support cylinder and the screws connecting the liftgate hinge to the frame. With care, lift down the headliner to get to the bolts at the liftgate hinge and then pull out the hinge. If desired, paint the newly purchased hinge before you attach it to the door. Tilt up the liftgate, line up the hinge with the marks you made and attach the bolts to make sure the hinge is hooked onto the liftgate. Be sure to slide a bead of 3M-Drip Check Sealant over the hinge bolt threads. Put the hinge where the marks are on the roof and use bolts to secure it to the panel. Attach the support cylinder under the liftgate, lift halfway out the support, then reset the D-pillar trim and liftgate trim in place.