How to service and repair the Power Trunk Liftgate Lock Actuator on Dodge Durango?

Begin the servicing and repairing of Power Trunk and Liftgate Lock Actuator by first disconnecting and isolating the battery negative cable. To remove the power lock motor from the liftgate inner panel trim, take out the two screws through the inner trim. Then remove the inner trim. Enough space should be created through the hole in the liftgate inner panel to pull out the power lock motor from the liftgate, so as to disconnect the liftgate power lock motor pigtail wire connector from the liftgate wire harness connector. Inorder to disconnect the link from the liftgate latch link clip, lower the power lock motor and remove the motor from the liftgate. To install, position the liftgate power lock motor into the liftgate through the access hole in the liftgate inner panel. Insert the liftgate power lock motor link into the liftgate latch link clip, and snap the clip over the link. Reconnect the pigtail wire connector of the liftgate power lock motor to the liftgate wire harness connector, position the motor within the liftgate inner panel, and install and tighten the two screws securing the power lock motor to the liftgate inner panel to 3 Nm (30 in. lbs.). Put back the trim panel on the liftgate inner panel and connect the battery negative cable.

OEM Dodge Durango Liftgate Lock Actuator

Tailgate Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Liftgate Lock Actuators found

View related parts
Dodge Durango Lock Actuator, Rear Part Number: 4589131AG
$151.61 MSRP: $227.00
You Save: $75.39 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Rear Trunk Lock Actuator Motor; Door Lock Actuator; Trunk Latch.; Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 4589131AF, 4589131AA, 4589131AB, 4589131AC, 4589131AD, 4589131AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Dodge Durango | Citadel, Crew, Express, Heat, R/T, Special Service, SXT | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Lock Actuator, Rear Part Number: 4589656AF
$405.54 MSRP: $612.00
You Save: $206.46 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Rear Trunk Lock Actuator Motor; Door Lock Actuator; Trunk Latch.; Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 4589656AB, 4589656AE, 68231652AB, 4589656AD, 4589656AA, 68231652AC, 4589656AC, 68231652AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, Special Service, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Lock Actuator, Rear Part Number: 68110603AC
$181.93 MSRP: $270.00
You Save: $88.07 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Rear Trunk Lock Actuator Motor; Door Lock Actuator; Trunk Latch.; Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 68110603AA, 68110603AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, Special Service, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Lock Actuator, Rear Part Number: 4589064AC
$253.05 MSRP: $383.00
You Save: $129.95 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Rear Trunk Lock Actuator Motor; Door Lock Actuator.; Lock
- Position: Rear
- Replaces: 4589064AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Lock Actuator Part Number: 4589066AE
$297.98 MSRP: $439.00
You Save: $141.02 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Trunk Lock Actuator Motor; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock
- Replaced by: 4589066AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Durango | Adventurer, Limited, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Lock Actuator Part Number: 55257097AB
Product Specifications
- Other Name: Actuator - Liftgate Lock; Tailgate, Trunk, and Door Lock Actuator Motor.; Actuator; Actuator Liftgate Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Lock Actuator, Rear Part Number: 4589580AA
Product Specifications
- Other Name: Latch - Liftgate; Rear Trunk Lock Actuator Motor; Door Lock Actuator.; Lock; Latch Lift Gate
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

Dodge Durango Liftgate Lock Actuator

Choose OEM Liftgate Lock Actuator that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Liftgate Lock Actuator follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Durango Liftgate Lock Actuator Parts and Q&A

Lock Actuator
55257097AB
Q:
How to service and repair the Power Trunk Liftgate Lock Actuator on Dodge Durango?
A:
Begin the servicing and repairing of Power Trunk and Liftgate Lock Actuator by first disconnecting and isolating the battery negative cable. To remove the power lock motor from the liftgate inner panel trim, take out the two screws through the inner trim. Then remove the inner trim. Enough space should be created through the hole in the liftgate inner panel to pull out the power lock motor from the liftgate, so as to disconnect the liftgate power lock motor pigtail wire connector from the liftgate wire harness connector. Inorder to disconnect the link from the liftgate latch link clip, lower the power lock motor and remove the motor from the liftgate. To install, position the liftgate power lock motor into the liftgate through the access hole in the liftgate inner panel. Insert the liftgate power lock motor link into the liftgate latch link clip, and snap the clip over the link. Reconnect the pigtail wire connector of the liftgate power lock motor to the liftgate wire harness connector, position the motor within the liftgate inner panel, and install and tighten the two screws securing the power lock motor to the liftgate inner panel to 3 Nm (30 in. lbs.). Put back the trim panel on the liftgate inner panel and connect the battery negative cable.